A sequential extraction to determine the distribution of apatite in granitoid soil mineral pools with application to weathering at the Hubbard Brook Experimental Forest,NH, USA

Mineral weathering in soils is an important source of many nutrients to forest ecosystems. Apatite, a Ca phosphate mineral, occurs in trace amounts in virtually all igneous and metamorphic rocks and is often found as small mineral inclusions in more weathering-resistant silicate minerals. To better understand the distribution of apatite in soils and its exposure to soil solutions, a sequential extraction method was developed to selectively dissolve minerals from soils so that the amount of apatite in contact with soil solutions versus that armored by silicate minerals could be quantified. The use of three molarities of HNO₃ (0.01, 0.1 and 1 M) at three temperatures (0, 10, or 20 °C) was explored and it was found that apatite congruently dissolved in 1 M HNO₃ at all three temperatures, but did not completely dissolve in weaker HNO₃ solutions. Soil horizons, glacial till (i.e., soil parent material), and individual minerals separated from till collected from the Hubbard Brook Experimental Forest (HBEF), NH, were subjected to a 4-step sequential extraction. Chemical analyses of the extracts indicate that 1 M NH₄Cl (pH 7; 20 °C) removes exchangeable ions, 1 M HNO₃ at 20 °C primarily dissolves apatite in contact with solutions, 1 M HNO₃ at 200 °C primarily dissolves biotite and chlorite (and apatite armored by them), and a mixture of concentrated HNO₃, HCl, and HF at 200 °C dissolves the more refractory minerals including muscovite, alkali feldspar, plagioclase feldspar and quartz (and apatite armored by these minerals). This extraction method was applied to soil profiles from HBEF to demonstrate that it could be used to interpret the abundance of apatite and other minerals as a function of depth. Approximately 70% of the apatite in the HBEF soil parent material is exposed to soil solutions; the remaining 30% is armored in more weathering-resistant micas and feldspars. In the upper soil horizons, the only apatite that has not been weathered from the soil occurs as inclusions in micas and feldspars and thus the rate of dissolution of apatite in weathered soil horizons is controlled by silicate mineral dissolution.     

Valorization of olive stone as adsorbent of chromium(VI): comparison between laboratory- and pilot-scale fixed-bed columns

The main aim of this work is to study the effect of scaling in the biosorption of chromium(VI) onto olive stone in two different fixed-bed columns. Firstly, the effect of flow rate, bed depth and inlet concentration of Cr(VI) in both columns was analyzed. The results revealed a better operation for lower flow rates, higher bed heights and lower inlet concentrations of metal. When decreasing flow rate, the operation time of the column increases. Therefore, as the solution flow rate increased the breakthrough and the exhaustion times decreased. An increase in bed depth increases the quantity of chromium eliminated and thus, the higher sorption capacity of the system. A decrease in the inlet concentration of chromium produces a delay in exhaustion time, and larger volumes of solution could be treated. The results were fitted to the BDST model, obtaining that the adsorptive capacity of the bed depth is similar in laboratory- and pilot-scale fixed-bed columns, considering the biosorption capacity as a biosorption-coupled reduction process. Results also could indicate that scaling affects more to the reduction process than properly biosorption process. The experimental data were also fitted to Adams–Bohart, Thomas, Yoon–Nelson and dose–response models. A good fit of the biosorption process of Cr(VI) was found for dose–response and Adams–Bohart models.     

Ammonia observations of the nearby molecular cloud MBM 12

We present NH₃(1,1) and (2,2) observations of MBM 12, the closest known molecular cloud (65-pc distance), aimed at finding evidence for on-going star formation processes. No local temperature (with a T _rot upper limit of 12 K) or linewidth enhancement is found, which suggests that the area of the cloud that we have mapped (15-arcmin size) is not currently forming stars. Therefore this nearby 'starless' molecular gas region is an ideal laboratory to study the physical conditions preceding new star formation.
A radio continuum source has been found in Very Large Array archive data, close to but outside the NH₃ emission. This source is likely to be a background object.     

Fault plane orientations of microearthquakes at Mt. Etna from the inversion of P-wave rise times

A crucial point in the analysis of tectonic earthquakes occurring in a volcanic area is the inference of the orientation of the structures along which the ruptures occur. These structures represent zones of weakness which could favor the migration of melt toward the surface and the assessment of their geometry is a fundamental step toward efficient evaluation of volcanic risk. We analyzed a high-quality dataset of 171 low-magnitude, tectonic earthquakes that occurred at Mt. Etna during the 2002–2003 eruption. We applied a recently developed technique aimed at inferring the source parameters (source size, dip and strike fault) and the intrinsic quality factor Q_p of P waves from the inversion of rise times. The technique is based on numerically calibrated relationships among the rise time of first P waves and the source parameters for a circular crack rupturing at a constant velocity. For the most of the events the directivity source effect did not allow us to constrain the fault plane orientation. For a subset of 45 events with well constrained focal mechanisms we were able to constrain the “true” fault plane orientation. The level of resolution of the fault planes was assessed through a non linear analysis based on the random deviates technique. The significance of the retrieved fault plane solutions and the fit of the assumed source model to data were assessed through a χ-square test. Most of the retrieved fault plane solutions agree with the geometrical trend of known surface faults. The inferred source parameters and Q_p are in agreement with the results of previous studies.     

X-ray Computed Tomography study of the influence of consolidants on the hydric properties of sandstones for stone conservation studies

X-ray Computed Tomography (X-ray CT) has been used to study the petrophysical characteristics of a Jurassic sandstone from Asturias (Northern Spain) used as building stone in several monuments in the region. CT monitoring of water capillarity tests has made it possible to visualize the movement of water inside the samples, to relate this movement with texture characteristics, and to measure the height reached in successive images, thereby determining the capillary penetration coefficient; based on this coefficient, the effective capillary pore radius has also been estimated. An advantage of the use of CT is that, as the information comes from the sample interior, border effects that can be generated in the external faces can be avoided.The CT was also used to visualize how a commercial organosilicon consolidant penetrates inside the rock by means of capillarity, a usual way of consolidant application in stone restoration processes. The coefficient of capillary penetration of the product, determined on the basis of the measurements made on the tomographic images, is 53% less than that of water. The influence of rock texture characteristics on the capillarity both of the consolidant and the water was also observed.The samples underwent CT water capillarity studies before and after the consolidant application, proving that the treatment improves the rock's hydric properties. The coefficient of capillary penetration decreased by 24% following the application of the consolidant, whereas the effective pore radius decreased by more than 40%.     

Imaging the recent sediment dynamics of the Galicia Bank region (Atlantic,NW Iberian Peninsula)

Multibeam bathymetry, high resolution multi-channel, and very high resolution single-channel (3.5 kHz) seismic records were used to depict the complex geomorphology that defines the Galicia Bank region (Atlantic, NW Iberian Peninsula). This region (≈620–5,000 m water depth) is characterized by a great variety of features: structural features (scarps, highs, valleys, fold bulges), fluid dynamics-related features (structural undulations and collapse craters), mass-movement features (gullies, channels, mass-flow deposits, slope-lobe complexes, and mass-transport deposits), bottom-current features (moats, furrows, abraded surface, sediment waves, and drifts), (hemi)pelagic features, mixed features (abraded surfaces associated to mixed sediments) and bioconstructions. These features represent architectural elements of four sedimentary systems: slope apron, contouritic, current-controlled (hemi)pelagic, and (hemi)pelagic. These systems are a reflection of different sedimentary processes: downslope (mass transport, mass flows, turbidity flows), alongslope (bottom currents of Mediterranean Outflow Water, Labrador Sea Water, North Atlantic Deep Water, and Lower Deep Water), vertical settling, and the interplay between them. The architectural and sediment dynamic complexities, for their part, are conditioned by the morphostructural complexity of the region, whose structures (exposed scarps and highs) favor multiple submarine sediment sources, affect the type and evolution of the mass-movement processes, and interact with different water masses. This region and similar sedimentary environments far from the continental sediment sources, as seamounts, are ideal zones for carrying out submarine source-to-sink studies, and can represent areas subject to hazards, both geologic and oceanographic in origin.     

Changes in trophic flow structure of Independence Bay (Peru) over an ENSO cycle

During the strong warm El Niño (EN) that occurred in 1997/98, Independence Bay (14°S, Peru) showed a ca. 10 °C increase in surface temperatures, higher oxygen concentrations, and clearer water due to decreased phytoplankton concentrations. Under these quasi-tropical conditions, many benthic species suffered (e.g. macroalgae, portunid crabs, and polychaetes) while others benefited (e.g. scallop, sea stars, and sea urchins). The most obvious change was the strong recruitment success and subsequent proliferation of the scallop Argopecten purpuratus, whose biomass increased fiftyfold. To understand these changes, steady-state models of the bay ecosystem trophic structure were constructed and compared for a normal upwelling year (1996) and during an EN (1998), and longer-term dynamics (1996–2003) were explored based on time series of catch and biomass using Ecopath with Ecosim (EwE) software. Model inputs were based on surveys and landings data collected by the Instituto del Mar del Perú (IMARPE). Results indicate that while ecosystem size (total throughput) is reduced by 18% during EN, mainly as a result of decreased total primary production, benthic biomass remains largely unchanged despite considerable shifts in the dominant benthic taxa (e.g. scallops replace polychaetes as secondary consumers). Under normal upwelling conditions, predation by snails and crabs utilize the production of their prey almost completely, resulting in more efficient energy flow to higher trophic levels than occurs during EN. However during EN, the proliferation of the scallop A. purpuratus combined with decreased phytoplankton increased the proportion of directly utilized primary production, while exports and flows to detritus are reduced. The simulations suggest that the main cause for the scallop outburst and for the reduction in crab and macroalgae biomass was a direct temperature effect, whereas other changes are partially explained by trophic interactions. The simulations suggest that bottom-up effects largely control the system.     

Use of Systematic, Palaeoflood and Historical Data for the Improvement of Flood Risk Estimation. Review of Scientific Methods

The catastrophic floods recently occurring in Europe warn of the critical need forhydrologic data on floods over long-time scales. Palaeoflood techniques provideinformation on hydrologic variability and extreme floods over long-time intervals(100 to 10,000 yr) and may be used in combination with historical flood data (last1,000 yr) and the gauge record (last 30–50 yr). In this paper, advantages anduncertainties related to the reconstruction of palaeofloods in different geomorphologicalsettings and historical floods using different documentary sources are described.Systematic and non-systematic data can be combined in the flood frequency analysisusing different methods for the adjustment of distribution functions. Technical toolsintegrating multidisciplinary approaches (geologic, historical, hydraulic and statistical)on extreme flood risk assessment are discussed. A discussion on the potential theoreticalbases for solving the problem of dealing with non-systematic and non-stationary data ispresented. This methodology is being developed using new methodological approachesapplied to European countries as a part of a European Commission funded project (SPHERE).     

Atmospheric Disturbances that Generate Intermittent Turbulence in Nocturnal Boundary Layers

Using the unprecedented observational facilities deployed duringthe 1999 Cooperative Atmosphere-Surface Exchange Study (CASES-99),we found three distinct turbulent events on the night of 18October 1999. These events resulted from a density current,solitary wave, and internal gravity wave, respectively. Our studyfocuses on the turbulence intermittency generated by the solitarywave and internal gravity wave, and intermittent turbulenceepisodes associated with pressure change and wind direction shiftsadjacent to the ground. Both the solitary and internal gravitywaves propagated horizontally and downward. During the passage ofboth the solitary and internal gravity waves, local thermal andshear instabilities were generated as cold air was pushed abovewarm air and wind gusts reached to the ground. These thermal andshear instabilities triggered turbulent mixing events. Inaddition, strong vertical acceleration associated with thesolitary wave led to large non-hydrostatic pressure perturbationsthat were positively correlated with temperature. The directionaldifference between the propagation of the internal gravity waveand the ambient flow led to lateral rolls. These episodic studiesdemonstrate that non-local disturbances are responsible for localthermal and shear instabilities, leading to intermittentturbulence in nocturnal boundary layers. The origin of thesenon-local disturbances needs to be understood to improve mesoscalenumerical model performance.