Low-altitude geophysical magnetic prospecting based on multirotor UAV as a promising replacement for traditional ground survey

Abstract

The prospects for expanding the mineral resource base in many countries are linked with the exploration of stranded sites localized at unexplored areas with complex natural and landscape conditions that make any ground survey, including magnetic prospecting, difficult and expensive. The current level of geology requires high-precision and large-scale data at the first stages of geological exploration. Since 2012, technologies of aeromagnetic surveying with unmanned aircraft vehicles (UAV) enter the market, but most of them are based on big fixed-wing UAV and do not allow to substantially increase the level of survey granularity compared with traditional aerial methods. To increase the scale of survey, it is necessary to reduce the altitude and speed of flight, for which the authors develop the methodical and technical solutions described in this article. To obtain data at altitudes of 5 m above the terrain even in a rugged relief, we created heavy multirotor UAVs that are stable in flight and may be used in a wide range of environmental conditions (even a moderate snowfall), and develop a special software to generate flight missions on the basis of digital elevation models. A UAV has special design to reduce magnetic interference of the flight platform; the magnetic sensor is hung below the aircraft. This technology was conducted in a considerable amount of magnetic surveys in the mountainous regions of East Siberia between 2014 and 2016. The results of the comparison between airborne and ground surveys are presented, which show that the sensitivity of the developed system in conjunction with low-altitude measurements can cover any geologically significant anomalies of the magnetic field. An unmanned survey is cheaper and more productive; the multirotor-based technologies may largely replace traditional ground magnetic exploration in scales of 1:10,000?1:1000.     

Ce anomalies in Gough Island lavas — Trace element characteristics of a recycled sediment component

High precision trace element data obtained by inductively coupled plasma mass spectrometry and Sr–Nd isotope analyses are presented for mafic volcanic rocks from Gough Island, South Atlantic. The new data reveal negative Ce anomalies, with Ce/Ce^? values in Gough lavas extending down to ～ 0.92. Ce is only fractionated from other rare earth elements (REE) due to formation of Ce⁴⁺ under oxidizing conditions of near-surface environments while other REE remain trivalent. Ce anomalies in convergent margin magmas have been shown to indicate a contribution of a subducted sediment component. In contrast, Ce anomalies in intra-plate basalts have been attributed to weathering processes, but can be excluded here based on element–element systematics indicating magmatic trends rather than weathering-induced element mobility. Shallow-level contamination by local marine sediments with negative Ce anomaly inherited from seawater can be excluded because Gough lavas with increasingly negative Ce anomalies do not trend towards low Ce/Pb ratios characterizing such sediments. Rather, it is argued that the negative Ce anomalies in Gough Island lavas are consistent with variable amounts of a sediment component in the mantle plume source. Mixtures between estimates of subducting sediment columns with negative Ce anomaly and mantle capable of giving rise to Gough Island magmas without Ce anomalies reproduce the Gough compositional array with the exception of highly fluid-mobile elements. The calculated trace element composition of the deeply recycled sediment in the Gough plume source is depleted in fluid-mobile elements such as Ba and Pb relative to the composition of some present-day subducting sediments. This loss is attributed to the dehydration or flushing of sediment in the subduction factory, consistent with constraints from arc magmas.     

基于宏基因组测序研究中太平洋海山富钴结壳区非培养微生物生态功能

富钴结壳是一种重要的海底矿产资源.富钴结壳是生物地球化学和微生物学的研究热点,但目前我们对富钴结壳区的微生物群落结构仍缺乏认识.本研究针对中太平洋海山富钴结壳区沉积物,采用非培养方法获得微生物基因组信息并分析其生态学功能.采用PCR的方法筛选得到78个带有16S rRNA基因的克隆.变形杆菌门和奇古菌门MGI类群分别为古菌和细菌的主要类群.测序并分析了9个带有16S rRNA 基因的fosmid克隆.这些克隆中含有较多的代谢相关和重金属抗性相关基因,表明多样的代谢和抗逆途径在微生物适应富钴结壳环境中发挥了重要作用.代谢途径分析表明,氮循环是富钴结壳区一种重要的生物地球化学过程.此外,发现多个水平基因转移事件,这些基因大部分转移自细菌,少量转移自古菌或植物.比较基因组分析表明,属于奇古菌门MGI类群的克隆W4-93包含一段共线性的基因簇.以上结果说明水平基因转移和基因组分歧进化在微生物适应深海环境过程中发挥了重要作用.     

How rough sea affects marine seismic data and deghosting procedures

Most seismic processing algorithms generally consider the sea surface as a flat reflector. However, acquisition of marine seismic data often takes place in weather conditions where this approximation is inaccurate. The distortion in the seismic wavelet introduced by the rough sea may influence (for example) deghosting results, as deghosting operators are typically recursive and sensitive to the changes in the seismic signal. In this paper, we study the effect of sea surface roughness on conventional (5–160 Hz) and ultra‐high‐resolution (200–3500 Hz) single‐component towed‐streamer data. To this end, we numerically simulate reflections from a rough sea surface using the Kirchhoff approximation. Our modelling demonstrates that for conventional seismic frequency band sea roughness can distort results of standard one‐dimensional and two‐dimensional deterministic deghosting. To mitigate this effect, we introduce regularisation and optimisation based on the minimum‐energy criterion and show that this improves the processing output significantly. Analysis of ultra‐high‐resolution field data in conjunction with modelling shows that even relatively calm sea state (i.e., 15 cm wave height) introduces significant changes in the seismic signal for ultra‐high‐frequency band. These changes in amplitude and arrival time may degrade the results of deghosting. Using the field dataset, we show how the minimum‐energy optimisation of deghosting parameters improves the processing result.     

Transport of suspended sediments under the influence of bank macro‐roughness

River restoration works often include measures to promote morphological diversity and enhance habitat suitability. One of these measures is the creation of macro‐roughness elements, such as lateral cavities and embayments, in the banks of channelized rivers. However, in flows that are heavily charged with fine sediments in suspension, such as glacier‐fed streams and very low‐gradient reaches of large catchment rivers, these lateral cavities may trap these sediments. Consequently, the morphological changes may be affected, and the functionality of the restoration interventions may be compromised. Herein, we analyse the influence of these macro‐roughness elements on the transport of fine sediments in the main channel. Laboratory tests with uniform flow charged with sediments in a channel with banks equipped with large‐scale rectangular roughness elements were carried out. The laboratory experiments covered a wide range of rectangular cavity geometrical configurations and shallowness ratios. The influence of key parameters such as flow shallowness, geometric ratios of the cavities and initial sediment concentration was tested. Surface particle image velocimetry, sediment samples and temporal turbidity records were collected during the experiments. The amount of sediments captured by the cavities, the temporal evolution of the concentration of sediments in suspension and the flow hydrodynamics are cross‐analysed and discussed. It is shown that the trapping efficiency of the macro‐roughness elements is a clear function of the channel geometry and the shallowness of the flow. Copyright © 2017 John Wiley & Sons, Ltd.     

Erosion,transport and deposition of a sediment replenishment under flood conditions

River reaches downstream of dams with constant residual discharge often lack sediment supply and periodic high flows due to dam sediment retention and flow regulation, respectively. To test a novel multi-deposit methodology for defining environmental flows for activating the dynamics of the river morphology downstream of dams, a flood was released from Rossens Dam in Switzerland. This event was combined for the first time with a multi-deposit configuration of sediment replenishment consisting of four artificial deposits allocated as alternate bars along the riverbanks as a restoration measure. To validate the sediment transport behaviour observed in laboratory tests, stones were equipped with radiofrequency identification (RFID) passive integrated transponder (PIT) tags, a fixed antenna was installed at the river bed and a mobile antenna was used to enable the investigation of the erosion, transport and deposition of replenished sediments. The duration of the erosion period was determined for the tracked stones, and average transport velocities were found to be on the order of 10^–3 m/s. To estimate the erosion efficiency of the flood, defined as the eroded tagged stones compared with the released water volume, the hydrograph was divided into different periods: rising limb, constant peak discharge, decreasing limb. During the rising limb of the flood, which lasted for 20% of the total flood duration, more than 40% of the PIT tags were transported. The defined erosion efficiency is a measure to support the hydrographic design of artificial flood releases from dams. The deposition of tagged stones resulted in a repeating cluster formation, as expected from previous laboratory experiments, creating an increase in hydraulic habitat diversity. Comparison of the results obtained in the field and from laboratory experiments confirmed the robustness of the multi-deposit sediment replenishment method. Combined with the knowledge gained on the erosion efficiency, these results could motivate further applications and research into multi-deposit sediment replenishment techniques as a habitat-oriented river restoration measure. © 2020 John Wiley & Sons, Ltd.     

Seismic-impedance inversion with fuzzy clustering constraints: an example from the Carlin Gold District,Nevada, USA

The seismic reflection method provides high-resolution data that are especially useful for discovering mineral deposits under deep cover. A hindrance to the wider adoption of the seismic reflection method in mineral exploration is that the data are often interpreted differently and independently of other geophysical data unless common earth models are used to link the methods during geological interpretation. Model-based inversion of post-stack seismic data allows rock units with common petrophysical properties to be identified and permits increased bandwidth to enhance the spatial resolution of the acoustic-impedance model. However, as seismic reflection data are naturally bandlimited, any inversion scheme depends upon an initial model, and must deal with non-unique solutions for the inversion. Both issues can be largely overcome by using constraints and integrating prior information. We exploit the abilities of fuzzy c-means clustering to constrain and to include prior information in the inversion. The use of a clustering constraint for petrophysical values pushes the inversion process to select models that are primarily composed of several discrete rock units and the fuzzy c-means algorithm allows some properties to overlap by varying degrees. Imposing the fuzzy clustering techniques in the inversion process allows solutions that are similar to the natural geologic patterns that often have a few rock units represented by distinct combinations of petrophysical characteristics. Our tests on synthetic models, with clear and distinct boundaries, show that our methodology effectively recovers the true model. Accurate model recovery can be obtained even when the data are highly contaminated by random noise, where the initial model is homogeneous, or there is minimal prior petrophysical information available. We demonstrate the abilities of fuzzy c-means clustering to constrain and to include prior information in the acoustic-impedance inversion of a challenging magnetotelluric/seismic data set from the Carlin Gold District, USA. Using fuzzy c-means guided inversion of magnetotelluric data to create a starting model for acoustic-impedance proved important in obtaining the best result. Our inversion results correlate with borehole data and provided a better basis for geological interpretation than the seismic reflection images alone. Low values of the acoustic impedance in the basement rocks were shown to be prospective by geochemical analysis of rock cores, as would be predicted for later gold mineralization in weak, decalcified rocks.