Bedrock lithology control on contemporaneous alluvial fan facies, Oligo-Miocene, southern Pyrenees, Spain

Climate and tectonics play important roles in controlling processes of transport and deposition on alluvial fans, but the bedrock lithology in the fan catchment area is also a significant, independent factor. Adjacent Oligo-Miocene alluvial fan deposits on the northern margin of the Ebro Basin display contrasting depositional characteristics with one dominated by the deposits of debris flows and the other by deposition from flows of water. A difference in clast compositions indicates that the two studied fans (the Nueno and San Julián fans) had contrasting bedrock lithology in their drainage basins. The proximal facies of the Nueno fan body contains matrix-supported conglomerate beds with up to 80% pebble clasts of gypsum in a matrix of gypsiferous sand, interbedded with gypsarenite beds. The drainage basin of this fan was dominated by Triassic bedrock consisting of beds of gypsum, marl and micritic limestone. The San Julián fan body comprises clast-supported, polymict conglomerate beds containing pebbles from Triassic, Cretaceous and Palaeogene limestone units that are exposed in the adjacent part of the basin margin. The interfingering of the deposits of these two fans demonstrates that they were contemporaneous. Given the consistent climate, the differences in fan depositional processes must therefore be attributed to the contrasting bedrock lithology in their drainage basins. A drainage basin consisting mainly of marl and gypsum bedrock provided sufficient fine-grained material to generate debris flows, whereas more dilute, water-lain processes dominated where the drainage basin was largely limestone strata.     

Influence of waves and horseshoe crab spawning on beach morphology and sediment grain-size characteristics on a sandy estuarine beach

The effects of wave action and horseshoe crab spawning on the topography and grain-size characteristics on the foreshore of an estuarine sand beach in Delaware Bay, New Jersey, USA were evaluated using data collected over six consecutive high tides. Data were gathered inside and outside a 25 m long exclosure constructed to create a control area free of disturbance by crabs. The density of crabs in the swash zone outside the exclosure was 8·1 organisms m⁻². The maximum depth of sediment activation on the upper foreshore where spawning occurred was 0·103 m during periods characterized by low significant wave heights: < 0·08 m. This depth is greater than the depth of activation by waves alone during moderate significant wave heights of 0·16–0·18 m but less than the maximum depth (0·127 m) recorded when spawning occurred during periods of moderate wave heights. Spawning, combined with moderate wave heights, creates a concave upper foreshore that is similar to the type of profile change that occurs during storms, thus lowering the wave-energy threshold for morphological response. Spawning during low wave heights increases the mean grain size and sorting of surface sediments caused by the addition of gravel to the swash. Sedimentological differences are most pronounced on the upper foreshore, and data from this location may be most useful when using grain-size characteristics to interpret the effect of spawning in the sedimentary record. Depths of sediment reworking by horseshoe crabs can be greater than those by subsequent storm waves, so evidence of spawning can be preserved on non-eroding beaches. Greater depth of activation by horseshoe crab spawning than by waves alone, even during moderate-energy conditions, reveals the importance of crab burrowing in releasing eggs to the water column and making them available for shore birds.     

Sedimentology of proximal to distal volcaniclastics dispersed across an active foldbelt: Ellensburg Formation (late Miocene), central Washington

Late Miocene volcaniclastics of the Ellensburg Formation (Washington, northwestern USA) are exposed in basins within an integrated palaeodrainage over the depositional reach from 15 to 120 km eastward from a Cascade Range source area. Two facies associations are recognized. The first is composed of laterally restricted, well-sorted, polymictic conglomerates representing a gravel-bedload regime during inter-eruption periods. The second comprises laterally extensive sheets, bounded by deeply-developed paleosols, composed of monomictic pebbly, pumiceous dacitic sandstones with intercalated debris-flow and hyperconcentrated flood-flow deposits. These sheets aggraded in response to eruptive events that are sometimes recorded by air-fall tephras at the bases of sequences. Debris-flow and hyperconcentrated flood-flow deposits occur as far as 120 km from source, but are uncommon beyond 50 km. Hyperconcentrated flood-flow deposits initially increase in abundance away from source as debris-flow deposits diminish, suggesting formation of hyperconcentrated flood flows by dilution of debris flows. Sandy facies form broad sheets dominated by scour-fill bedding, in proximal and medial settings, and grade to narrower, trough cross-bedded sheets in distal settings, suggesting moderation of flood discharges with distance. Base-level changes associated with episodic sediment influx caused incision-aggradation cycles in mainstream settings, and episodic impoundment of tributaries to form lakes or rapidly aggrading, poorly drained floodplains. Although volcanism was the primary control on depositional style, concurrent development of the Yakima fold belt produced a structure-consequent drainage pattern that determined sediment dispersal, and basin subsidence permitted preservation of both syn-eruption and inter-eruption facies. Detritus from rising anticlines was generally diluted by the volumetrically superior extrabasinal volcaniclastics, but dominates deposits of small tributary streams flowing toward, rather than from, the Cascades.     

THE TIME-DOMAIN ELECTROMAGNETIC RESPONSE OF POLARIZABLE BODIES: AN APPROXIMATE CONVOLUTION ALGORITHM1

It is now believed that the negative transients observed in coincident-loop transient electromagnetic (TEM) measurements are caused by polarizable bodies (bodies whose conductivity increases as a function of frequency). Ordinarily the TEM response of polarizable bodies is obtained by calculating the frequency-domain response at many frequencies and transforming it to the time domain via Fourier, Laplace or Hankel transforms. This is normally a computationally laborious task. However, for some simple non-polarizable bodies the time-domain response is analytical and can be computed easily. When these simple bodies are weakly polarizable an approximate response can be obtained by convolving the easily-calculated, non-polarizable response with the impulse response of the polarization. The approximate response is found to be very similar to the exact response for the polarizabilities normally seen in geological materials.     

Sedimentation and palaeoenvironments of Late Cretaceous crater-lake deposits in Bushmanland, South Africa

A large diameter borehole core from an epiclastic kimberlite remnant on the farm Stompoor in the Prieska district, Cape Province, contains a continuous 76 m section of fossiliferous sediments interpreted as having accumulated within a crater-lake during the Late Cretaceous. Three distinct facies associations reflect depositional processes that prevailed in offshore areas of the original lake. Facies Association A: matrix-supported pebble conglomerates comprising a chaotic assemblage of pyroclastic, basement and country rocks set in a fine-grained matrix. Flat, non-erosional basal surfaces with ‘frozen’ rip-up clasts, the protrusion of matrix-supported clasts above the upper surfaces and a direct relationship between maximum clast size and bed thickness suggest deposition from debris flows that originated subaerially on pyroclastic talus cones surrounding the crater. Facies Association B: alternating thin beds of matrix-supported granule conglomerate, structureless fine-grained sandstone and parallel laminated mudrock. Small fining-upward sequences within these beds are comparable to turbidite Bouma Tade, Tde. Numerous partings display petrified fish and frog skeletons, as well as bivalve, gastropod and ostracode shells, leaf impressions, insect wings and a possible bird bone. These beds were deposited by thin debris-flows and turbidity underflows interspersed with periods of ‘pelagic’ sedimentation. Facies Association C: microlaminated mudstone beds containing scattered ‘dropstone lapilli’. The lamination is imparted by alternating Ca-rich/Ca-poor layers which may reflect climatic seasonality. They are interpreted as the result of seasonally influenced suspension settling through a thermally stratified water column. Short-term periodicities in conglomerate bed thicknesses are interpreted as the result of successive block caving of a slump scar giving rise to several debris flows from the same source area. Seismic shock from nearby volcanism may have simultaneously triggered slumps on both subaerial and subaqueous slopes. Dropstone lapilli in Type C beds and the preponderance of load casting in Type B beds support this interpretation. An estimate of the time span involved in accumulating 76 m of crater lake sediments based on the possible seasonal imprint of Type C beds gives a figure of some 220,000 yr.     

Recommended Radium-226 Values for Four CCRMP Uranium Reference Materials

The Canadian Certified Reference Materials Project announces recommended values for radium-226 activity in four reference materials previously certified for uranium. Thirteen laboratories participated in the interlaboratory program for DL-la, DH-la, BL-4a and BL-5. Four measurement techniques were applied. Procedural and instrument calibrations were performed with certified radium solutions from the National Bureau of Standards, thereby establishing traceability of the recommended values for radium-226 in DL-la, DH-la, BL-4a and BL-5. These reference ores are also shown to be close to, if not in, radioactive equilibrium.     

地形可视化系统TerraVision技术分析及其在全球海量空间数据管理中的应用

简要介绍TerraVision开发的背景,重点论述系统的结构、数据组织、算法思想及在此基础上构建全球海量空间数据管理系统的方案.实践证明该方案具有较强的可行性,能够满足应用的需要.     

利用球面离散格网组织空间数据的关键技术

球面离散格网系统是一种能够一体化表达空间位置和测量精度的新型空间数据模型.在分析其优点的基础上,提出利用球面六边形格网系统组织多源、异构空间数据的基本思路.对其中涉及的高精度离散格网系统设计、层次格网编码与索引方案、实体表达与数据重组、实体查询与分析算法等关键技术提出了解决方案.通过原型系统验证了其可行性.     

THERMAL RESPONSE CHARACTERISTICS OF STONE: IMPLICATIONS FOR WEATHERING OF SOILED SURFACES IN URBAN ENVIRONMENTS

Soiling of stone surfaces by particulate deposition increases absorption of radiant energy, raises surface/subsurface temperature gradients and accentuates rates of surface temperature change. Short-term fluctuation of raised surface temperatures, in response to variations in windspeed and cloud cover, may ultimately contribute to stone breakdown through ‘fatigue’ effects which reduce cohesive strength of intergranular bonds and initiate microfracture development. The effects of soiling are particularly marked for stone with low thermal conductivity and high albedo when clean. Albedo change has implications for the effectiveness of weathering processes and the durability of building stone by creating microenvironmental conditions which are more severe than those indicated by macroenvironmental regimes.