Principal Components Analysis of Rainfall and Associated Synoptic Models of the Southwest Monsoon over India

Summary  The summer monsoon circulation shows various spatial and temporal oscillations and often a combination of systems produces an integrated effect. In this study phases of the southwest (SW) monsoon have been identified in an objective manner with the help of T-mode principal component analysis (PCA) of weekly rainfall anomalies. Mean composite charts have been prepared utilising all available upper air data (1977–1986) for each category of the SW monsoon epochs identified by the PCA. These sets of charts have been constructed for both the strong and weak phases associated with the first four significant principal components (PCs). A well defined east-west oriented trough system, extending from about 28° N Latitude/65° E Longitude to 20° N Latitude/90° E Longitude, in the lower levels, has been the main feature associated with the strong phase of the monsoon corresponding to PC I. The trough in the lower levels is more marked in the eastern half compared to the western half in both the sets of charts associated with strong phases of the monsoon related to the PC II and PC III. With PC II, the position of the troughs in the lower levels is further north of its location in PC III. The east-west trough system associated with the strong phase of PC IV has a large southward tilt with height. The charts corresponding to the weak phases of these PCs have synoptic features, such as the position of the trough close to the foothills of the Himalayas, and the shifting of middle and upper tropospheric anticyclones to the south. The study suggests an objective method of interpretation of principal components by utilising synoptic data. In addition, synoptic models and data sets corresponding to different phases of the monsoon can also be prepared in an objective manner by such PCA. Received July 18, 1997 Revised April 30, 1999     

The use of acidimetric titration as a novel approach to study particulate trace metal speciation and mobility: Application to sediments of the Scheldt estuary

The study of trace metal speciation has benefited from a great deal of interest leading to the development and the diversification of sequential extraction schemes (SES), which triggered the need for harmonization by the standard, measurements and testing programme (SM & T). However, some uncertainties still persist in the application of the harmonized 3-step protocol, because of the difficulty in conceptualizing a technique that can be applied to environmental samples irrespective of their nature. The alternative method proposed in this study is based on the solubility of the sample components progressively dissolved during the course of an acidimetric titration by 1 mol L⁻¹ HCl. The major HCl-reactive mineralogical components are identified using mass balance calculation of H⁺ consumed by their dissolution together with the amount of major elements released into solution. The speciation of minor and trace elements is investigated by comparing their titrations to those of the major elements. This approach is much simpler than SES because it uses simple non-selective H⁺ at room temperature instead of a complex experimental design of so-called specific reagents. The different mineral components of the solid are no longer operationally defined and the problem of selectivity is irrelevant to the titration approach. The method was applied to several sediment samples from the Scheldt estuary and the particulate phase was further examined by Scanning Electron Microprobe and X-ray Diffraction techniques. The nearly complete consumption of H⁺ in the suspension is balanced by the total dissolution of carbonates and Fe-oxyhydroxides. In contrast to the speciation inferred from the Tessier SES, the acidimetric titration has demonstrated that the carbonate phase does not significantly contain trace metals with the exceptions of 40% of the Mn and 30% of the Co. In contrast, the Fe-oxyhydroxides seem to play a major role and account for 70% of Pb and 20% of Cr, in addition to 60% of P and additional amounts of 20% Co and 40% Mn. 70% of the Cu also occur in the oxyhydroxide phase, more likely coprecipitated with gibbsite. 90% of the Cd and 85% of Zn can be attributed to the Acid Volatile Sulfide (AVS) phase as evidenced from S titration. The acidimetric titration method not only provides information on the speciation of trace metals but also allows the quantification of their reactivity and mobility, if one considers that the titration roughly mimics pH changes that may occur as a result of chemical disequilibrium in the environment. The results demonstrate the potential of the acidimetric titration as an alternative to SES protocols in geochemical and environmental regulation studies. This method is applicable to a wide variety of environmental materials with little or minor adjustments.     

Saturn's electrostatic discharges: Could lightning be the cause?

It is proposed that Saturn's electrostatic discharges (SED) might be generated in the planet's equatorial atmosphere, perhaps as lightning from a storm system. The 10^h10^m periodicity of the signal envelope duplicates that of Saturn's equatorial jet. The rings shield the atmosphere from solar EUV photons, and thereby substantially reduce the local ionospheric cutoff frequency to allow low-frequency SED to leak out. Many of the unusual properties of SED could be explained in terms of changes in the storm system, the relative spacecraft position in the beaming pattern of the source, local refraction of the signal by the highly disturbed ionosphere, and the influence of the ring particles on the highest frequency component of SED. A comparison of SED with planetary lightning on other planets shows that the two are similar in general character and some time behavior; the power output of SED may be higher than most planetary lightnings but that is unclear because of uncertainties in the measurements and variations in the signal's spectrum. Our simple discussion suggests that lightning could be a viable source for SED and that exotic ring mechanisms are not necessarily required.     

The interpretation of body trace metal concentrations in neogastropods from Hong Kong.

Three species of neogastropods, i.e., Thais clavigera, Thais luteostoma and Morula musiva, were collected from 12 sites in the coastal waters of Hong Kong, including clean and known metal-enriched ones. Accordingly, body trace metal concentrations varied greatly. Copper and zinc body concentrations compared poorly with those of accepted biomonitors and presumed metal contamination profiles. Much is known about the feeding ecology of neogastropods on local shores and where direct observational data were not available, their diets could, nevertheless, be estimated reliably. Accumulated metal concentrations can be interpreted with regard to dietary history. T. luteostoma, for example, had body copper concentrations of 51.8 microg g(-1) on an exposed shore and a diet of mainly barnacles. In contrast, on a sheltered shore (but only some 250 m distant) where the diet consisted mainly of oysters, body copper concentrations were approximately 15 times greater at 833 microg g(-1). Similar results were obtained for T. clavigera. The results of this analysis suggest that neogastropods can play a significant role in trace metal trophic transfer studies, especially as their representatives are intertidally and subtidally ubiquitous and can be spatially separated into tropical specialists and temperate generalists.     

Biosorption of Rare-Earth Elements and Yttrium by Heterotrophic Bacteria in an Aqueous Environment

This paper reports the results of the experimental determination of the coefficient of sorption of rare-earth elements and yttrium (REY) under conditions of acidic pH using several strains of heterotrophic bacteria (Microbacterium sp., Curtobacterium sp., Bacillus subtilis, Pseudomonas putida, and Bacillus pumilis) that are widespread in natural and technogenic waters of the Far East (Russia). Insignificant fractionation between heavy and light rare-earth elements, negative cerium and dysprosium anomalies, and a positive europium anomaly were revealed. The selectivity of REY biosorption by gram-positive and gram-negative bacteria, as well as inertia of the biosorption process under more acidic conditions of the medium, were shown.     

Mean crustal velocity: a critical parameter for interpreting crustal structure and crustal growth

Mean crustal velocity is a critical parameter for genesis of continental crystalline crust because it is a function of mean crustal composition and therefore may be used to resolve continental crustal growth in space and time. Although the best values of mean crustal velocity are determined from wide-angle reflection measurements, most studied here necessarily come from vertical averages in crustal refraction determinations. The mode of 158 values of mean crustal velocity is 6.3 km/s, a velocity which corresponds to a mean crustal composition of granodiorite to felsic quartz diorite; Archean crust may be slightly more mafic. Mean crustal velocities range from 5.8 to 7.0 km/s. The lowest values invariably are found in thermally disturbed rift zones and the highest values correspond to velocities in gabbro. Velocities in island arcs may be as low as 6.0 km/s but are typically 6.5–6.9 km/s which corresponds to andesitic composition; estimates of island arc composition are andesitic. If values of mean crustal velocity are not biased, this observation suggests that continental crust did not grow simply by addition of island arc material. Possibilities are that crust formed from fusion of island arcs and was later changed to more felsic composition by addition of material from the mantle or that the late Archean episode of major crustal growth did not involve processes similar to younger island arcs. Some crustal blocks might be changed in composition and thickness by such processes as underplating, interthrusting, necking and sub-crustal erosion. Specially designed experiments are suggested to determine this parameter so critical for understanding genesis of continental crust.     

Guided wave propagation in laterally varying media - II. Lg-waves in north-western Europe

Summary. Lg -wave observations at NORSAR from a sequence of explosions straddling the Central Graben in the North Sea, show that the phase is almost extinguished by passing through this structure. For models of the graben structure, based on seismic refraction experiments, with crustal thinning beneath a zone of thickened sediments, numerical modelling of Lg propagation shows very poor transmission. The inclusion of attenuation simulating the effects of scattering from faults and other complex structures further diminishes the transmittivity. The theoretical effect of a crustal pinch is to redistribute S energy over a wide range of groups velocities, a pattern that fits well with the observations.
Three components recordings at NORSAR of explosive charges fired in water covering a wide range of azimuths, show significant transverse components to the seismograms. The transverse energy builds up with travel time and for Lg is of the same order as the vertical component. These results are consistent with the theoretical prediction of progressive net transfer of energy from Rayleigh to Love modes as the wavetrain propagates through a three-dimensionally heterogeneous medium.     

VELOCITY DISPERSION OF SEISMIC WAVES*

In well velocity surveys made to calibrate Sonic (CV) Logs the calibration survey uses frequencies around 50 Hz whereas the Sonic Logging tool uses frequencies around 20 kHz. There thus exists the possibility of making a direct measure of velocity dispersion. In any one survey the disturbing factors, both instrumental and operational, will often mask any dispersive effect that might exist. Consequently this paper reports on a statistical analysis of the velocity differences resulting from calibration surveys and Sonic logs. Only Borehole Compensated Sonic Logs were used. Four areas were investigated: the North Sea, Abu Dhabi, Libya and Alaska. After rejecting logs and calibration records which were obviously in error there remained 424000 feet (about 130 km) of usable log distributed throughout 66 wells. The four areas were analysed separately and in no case was the estimated dispersion significantly different from zero. However, the mean values did correlate with lithology from (? 0.17 ± 0.18)% for the essentially carbonate section in Abu Dhabi to (+ 0.45 ± 0.25)% for the sand-shale section in Alaska, a positive sign meaning that the higher frequencies travelled faster. Except for Alaska the calibration surveys were made with a wall-clamp geophone, and for these areas amplitude measurements were made. After suitable corrections estimates of the absorption parameter Q were obtained. These varied from 20 to 200 with mean values of 63 for Libya, 70 for Abu Dhabi and 88 for the North Sea (excluding the Tertiary). If, as is usually assumed, the absorption mechanism is linear and is described by a Q which is independent of frequency, then these values would necessarily imply dispersion of several percent. As instanced above no such dispersion was observed. It is possible that the expected dispersion was compensated for by invasion of the mud filtrate into the borehole walls, but it is more likely that the absorption mechanism was substantially non-linear.