Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Higher order analytical solutions of water table fluctuations in coastal aquifers

The groundwater response of coastal aquifers to tidal forcing is described by Laplace's equation coupled with the nonlinear phreatic-free surface boundary condition. Here we describe fluctuations in the water table using two small parameters, extending previous work by proposing an ansatz to compute higher order, semi-analytical solutions. The new solutions are compared with known lower order solutions. The relative difference between the linear solution and higher order solutions can reach up to 30% of the linear solution for shallow beaches. The new solutions exhibit a reduction in the over height of the groundwater fluctuations compared with the lower order solutions. In addition, the super elevation of the water table, both near shore and as the aquifer tends landward, is examined with the inclusion of higher order terms.     

Neuere Veröffentlichungen

Ohne Zusammenfassung     

Planning Ground Water Monitoring Field Projects

Project organization problems are not uncommon in ground water monitoring projects, particularly those which occur at sites remote from the office. Successful project management depends on coordination of the personnel, supplies, and equipment necessary to carry out each phase of the project. Procedures for planning and organizing field projects involving well installation, ground water sampling, and aquifer testing are outlined. Methods are suggested that will aid the Project Manager in planning and scheduling field work to make efficient use of personnel and material resources. Cautions are given regarding common pitfalls of projects involving operations at remote sites, and means of avoidance are enumerated. A checklist of commonly used field equipment and supplies is provided.     

The Longdendale landslides

Throughout its geomorphological history the South Pennine valley of Longdendale has been especially prone to landsliding and some ten landslide areas have been identified. These prove on analysis to be bedding plane slides with a strong degree of translation but often exhibiting non-circular rotational elements as well. Instability in the lower slopes has often led to cambering and valley bulging so that the slopes become deformed and slump earth flows developed at some sites. Several different types of landslide are examined in detail and by means of pollen analysis the slides are dated from the early postglacial to at least as recently as two thousand years B.P. although it has not yet been possible to decide when these slides started. The causes of sliding are identified, and comments are made upon.

• (a) The location of slip surfaces–which are frequently at the base of the Grindslow Shales above a sandstone aquifer.
• (b) The geomorphic processes which built up high pore-water pressures and steep pressure gradients in the past.
• (c) The effects of sliding on the development of hillslopes in the post-glacial period.

     

Developing a large‐scale water‐balance approach to seasonal forecasting: application to the 2012 drought in Britain

Seasonal hydrological forecasts, or outlooks, can potentially provide water managers with estimates of river flows and water resources for a lead time of several months ahead. An experimental modelling tool for national hydrological outlooks has been developed which combines a hydrological model estimate of sub‐surface water storage across Britain with a range of seasonal rainfall forecasts to provide estimates of area‐wide hydrological conditions up to a few months ahead. The link is made between a deficit in sub‐surface water storage and a requirement for additional rainfall over subsequent months to enable sub‐surface water storage and river flow to return to mean monthly values. The new scheme is assessed over a recent period which includes the termination of the drought that affected much of Britain in the first few months of 2012. An illustration is provided of its use to obtain return‐period estimates of the ‘rainfall required’ to ease drought conditions; these are well in excess of 200 years for several regions of the country, for termination within a month of 1 April 2012, and still exceed 40 years for termination within three months. National maps of sub‐surface water storage anomaly show for the first time the current spatial variability of drought severity. They can also be used to provide an indication of how a drought situation might develop in the next few months given a range of possible future rainfall scenarios. © 2013 CEH/Crown and John Wiley & Sons, Ltd.     

Discard mitigation - what we can learn from waste minimization practices in other natural resources?

Solutions to the problem of discarding in fisheries have been debated for decades. Despite this attention, measures to ameliorate discarding have had limited success. Regulators, researchers, and industry continue to struggle with fisheries management and foregone yield in the face of the continued wastage of valuable resources due to discarding.Waste minimization and by-product utilization are powerful imperatives in other sectors that are also reliant on the harvest of natural resources. This paper considers the performance of these sectors in waste minimization and by-product utilization, with the aim of identifying practices and processes that may be applied to ameliorate discarding in fisheries.This paper describes the handling, utilization, and mitigation of discards and waste in the livestock farming, agriculture, mining, and waste management industries, and in particular, in forestry. In terms of biological impact, economic objectives, and management approaches the harvesting of trees has substantial similarities to industrialized fishing. However, the forestry sector has found ways to utilize almost 100% of the natural product harvest by establishing markets and new products. Analogous developments within the fishing industry could substantially improve sustainability through reduced levels of discarding and wastage. Based on the experiences of these sectors it is suggested that evaluations of potential Management Strategies are developed to specifically examine discard mitigation approaches on a broader scale than previously conducted.     

Silica-undersaturated sapphirine, spinel and kornerupine granulite facies rocks, NE Strangways Range, Central Australia

Small pods of silica-undersaturated Al-rich and Mg-rich granulite facies rocks containing sapphirine, pleonastic spinel, kornerupine, cordierite, orthopyroxene, corundum, sillimanite and gedrite are scattered throughout the NE Strangways Range, Central Australia. These are divided into four distinct rock types, namely orthopyroxene-rich aluminous granofels and metapelitic gneisses containing sapphirine, spinel or kornerupine. Two granulite facies metamorphic events are recognized, of which only the first (M1) is considered in this paper. Peak metamorphic mineral parageneses indicate that the M1 thermal maximum occurred at approximately 900–950 °C and 8–9 kbar. All samples are characterized by profuse and diverse coronitic and symplectic reaction textures. These are interpreted as evidence for the sequential crossing of the following reactions in the system FMAS: cordierite + spinel + corundum = sapphirine + sillimanite, cordierite + spinel = orthopyroxene + sapphirine + sillimanite, sapphirine + spinel + sillimanite = orthopyroxene + corundum, sapphirine + sillimanite = cordierite + orthopyroxene + corundum. Phase stability relationships in FMAS and MASH indicate an anticlockwise P–T path terminated by isobaric cooling. Such a path is exemplified by early low-P mineral parageneses containing spinel, corundum and gedrite and the occurrence of both prograde and retrograde corundum. Reaction textures preserve evidence for an increase in aH₂O and aB₂O₃ with progressive isobaric cooling. This hydrous retrogression resulted from crystallization of intimately associated M1 partial melt segregations. There is no evidence for voluminous magmatic accretion giving rise to the high M1 thermal gradient. The M1 P–T path may be the result of either lithospheric thinning after both crustal thickening and burial of the supracrustal terrane, or concomitant crustal thickening and mantle lithosphere thinning.