Imaging buried Quaternary valleys using the transient electromagnetic method

Buried Quaternary valleys in Denmark are complex structures filled with various deposits consisting primarily of glacio-lacustrine clay, till and meltwater sand, and gravel. The valleys are important geophysical targets, because they often contain significant volumes of groundwater used for public water supply. About 700 km of buried valley structures have been imaged in the western part of Denmark by the transient electromagnetic (TEM) method. The ability to map the valleys depends primarily on valley geometry, infill architecture and the resistivity of the fill sediments as well as the substratum. One-dimensional (1-D) inversion models of the TEM soundings have been used to construct contour maps of 20 m average resistivities and depth to a good conductor, which provide images for geological interpretation. Images of buried valley morphology, fill properties, infill architecture, such as cut-and-fill structures, valley distribution and valley generations, are characterized for case studies from Hornsyld, Holstebro and the Vonsild/Agtrup areas of Denmark.     

La–SiO<Subscript>2</Subscript> and Yb–SiO<Subscript>2</Subscript> systematics in mid-ocean ridge magmas: implications for the origin of oceanic plagiogranite

Analytical expressions for the variation in D _La and D _Yb with increasing liquid SiO₂ for olivine, plagioclase, augite, hornblende, orthopyroxene, magnetite and ilmenite (Brophy in Contrib Mineral Petrol 2008, online first) have been combined with numerical models of hydrous partial melting, of mid-ocean ridge (MOR) cumulate gabbro melting, and fractional crystallization of slightly hydrous mid-ocean ridge basalt (MORB) magma to assess a melting versus fractionation origin for oceanic plagiogranite. For felsic magmas (>63 wt.% SiO₂) the modeling predicts the following. MOR cumulate gabbro melting should yield constant or decreasing La and constant Yb abundances with increasing liquid SiO₂. The overall abundances should be similar to those in associated mafic magmas. MORB fractional crystallization should yield steadily increasing La and Yb abundances with increasing SiO₂ with overall abundances significantly higher than those in associated mafic magmas. Application to natural occurrences of oceanic plagiogranite indicate that both MOR cumulate gabbro melting and MORB fractionation are responsible. Application of the model results to Icelandic rhyolites strongly support a fractional crystallization rather than a crustal melting origin.     

Time relationship between regional deformation and fabric development in the Peralimala pluton,South India — Inferences from magnetic fabric

Anisotropy of magnetic susceptibility (AMS) is investigated in samples of Peralimala (PM) pluton (ca. 550 Ma) and adjacent gneiss, gabbro, mylonite and amphibolite from the Moyar Shear Zone (MSZ), Southern Granulite Terrane (SGT) with an aim to decipher the time-relationship between fabric development in the pluton and regional tectonics. Magnetic foliation recorded in the PM pluton is sub-parallel to the WNW-ESE striking MSZ. Magnetic foliation and lineation trajectories are sigmoidal and curve into the shear zone. A dextral sense of shear is deciphered from the trajectories, which is similar to that reported within the MSZ in some earlier studies. It is inferred that the PM pluton has developed post-emplacement deformation-fabric related to reactivation of the MSZ during Pan-African age. Based on the data and existing information about regional tectonics of the area, the possibility of the (a) PM pluton being a Deformed Alkali Rock and Carbonatite (DARC) and (b) MSZ marking an ancient suture zone, is discussed.     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.     

Allocating local groundwater monitoring stations for South Korea using an analytic hierarchy process

A national groundwater-monitoring network consisting of 320 stations has been operated by the Ministry of Construction and Transportation and the Korea Water Resources Corporation since 1995. The network was established as a result of the Groundwater Act of Korea, and a supplementary local groundwater monitoring network containing 10,000 stations will be established throughout the country by the year 2011. A method of allocating stations and organizing the local monitoring network has been developed, based on the analytic hierarchy process (AHP), using pairwise comparison. Several evaluation criteria were selected for determining the required number of the monitoring stations at specific local districts. Weights of the selected criteria were assigned by the pairwise comparison, reflecting hydrogeological conditions and supported by pertinent questions to 93 groundwater experts. To evaluate appropriateness of this method, an example city, Jeonju, was selected where groundwater levels were monitored; seven stations were determined as to be required for the supplementary groundwater-monitoring network. The study demonstrated the usefulness of the AHP. The concepts of the development and the structure of the AHP model can be applied to site or well selections within a particular district.     

Leak-off mechanism and pressure prediction for shallow sediments in deepwater drilling

Deepwater sediments are prone to loss circulation in drilling due to a low overburden gradient. How to predict the magnitude of leak-off pressure more accurately is an important issue in the protection of drilling safety and the reduction of drilling cost in deep water. Starting from the mechanical properties of a shallow formation and based on the basic theory of rock-soil mechanics, the stress distribution around a borehole was analyzed. It was found that the rock or soil on a borehole is in the plastic yield state before the effective tensile stress is generated, and the effective tangential and vertical stresses increase as the drilling fluid density increases; thus, tensile failure will not occur on the borehole wall. Based on the results of stress calculation, two mechanisms and leak-off pressure prediction models for shallow sediments in deepwater drilling were put forward, and the calculated values of these models were compared with the measured value of shallow leak-off pressure in actual drilling. The results show that the MHPS (minimum horizontal principle stress) model and the FIF (fracturing in formation) model can predict the lower and upper limits of leak-off pressure. The PLC (permeable lost circulation) model can comprehensively analyze the factors influencing permeable leakage and provide a theoretical basis for leak-off prevention and plugging in deepwater drilling.     

Mixing,hypersalinity and gradients in Hervey Bay,Australia

Hervey Bay, a large coastal embayment situated off the central eastern coast of Australia, is a shallow tidal area (average depth = 15 m), close to the continental shelf. It shows features of an inverse estuary, due to the high evaporation rate (approx. 2 m/year), low precipitation (less than 1 m/year) and on average almost no freshwater input from rivers that drain into the bay. The hydro- and thermodynamical structures of Hervey Bay and their variability are presented here for the first time, using a combination of four-dimensional modelling and observations from field studies. The numerical studies are performed with the Coupled Hydrodynamical Ecological Model for Regional Shelf Seas (COHERENS). Due to the high tidal range (>3.5 m), the bay is considered as a vertically well-mixed system, and therefore, only horizontal fronts are likely. Recent field measurements, but also the numerical simulations, indicate characteristic features of an inverse/hypersaline estuary with low salinity (35.5 psu) in the open ocean and peak values (>39.0 psu) in the head water of the bay. The model further predicts a nearly persistent mean salinity gradient of 0.5 psu across the bay (with higher salinities close to the shore). The investigation further shows that air temperature, wind direction and tidal regime are mainly responsible for the stability of the inverse circulation and the strength of the salinity gradient across the bay. Due to an ongoing drying trend, the occurrence of severe droughts at the central east coast of Australia and, therefore, a reduction in freshwater supply, the salinity flux out of the bay has increased, and the inverse circulation has also strengthened.     

An Analytical Model For Threshold Crossing Rates Of Concentration Fluctuations In Dispersing Plumes

A simple analytical model is developed for the meanupcrossing rate of plume concentration fluctuations assuming that thisprocess can be well approximated by a lognormal process. The resultingexpression requires only the specification of the in-plume fluctuationintensity and in-plume Taylor micro-time scale and, hence, does notexplicitly involve the joint probability density function of theconcentration and its derivative. The analytical model provides agood fit to some field measurements of the mean upcrossing rate ina dispersing plume.     

The post-explosion shock propagation in the central region of our Galaxy

Immediate consequences of nuclear explosions on the structure and physical state of a galactic disk are considered in this paper. Explosions in the nucleus of a Galaxy generate strong shock waves which, when propagating onward heat and condensing the gas, form thin dense ring-like gaseous features behind it. Such rings and dense gaseous complexes have been observed in the central region of the Galaxy. These features have been treated here as the remnants of galactic shocks generated by nuclear explosions. We have estimated the time elapsed since the corresponding explosion, the energy released by explosion and the initial temperature and the velocity of the shock wave thus generated. The cooling of the gas heated by strong shocks has also been considered. The time taken by shock-heated gas to cool to its original temperature has been estimated to be of the order of 10⁵ to 10⁶ yr, according to the initial shock temperature which is about 9×10⁶ K or 6.4×10⁷ K. The rate of emission of energy and the total amount of energy dissipated away in the form of radiation in the cooling process, have been calculated for different values of initial shocktemperatures and also for different field intensities. The high-energy radiation emitted in the cooling process is suggested here as a source for the heating of dust grains, which ultimately are radiated in the infrared spectrum. Thus, a part of the infrared radiation, as measured by many authors, in the central region of the Galaxy, may originate ultimately from the cooling of the shock-heated gas there.     

Intermediary orbits for oscillating motions

Hamiltonian approximations generally result from series expansions and truncations at different orders. But other ways are possible, and some of them, as the one this paper tries to explore, can speed up Hamiltonian computations and prove useful for studies involving extensive developments, for example solar system bodies with complex dynamics or requiring accurate ephemeris for observational purposes.