On Flare-CME Characteristics from Sun to Earth Combining Remote-Sensing Image Data with <Emphasis Type="Italic">In Situ</Emphasis> Measurements Supported by Modeling

We analyze the well-observed flare and coronal mass ejection (CME) from 1 October 2011 (SOL2011-10-01T09:18) covering the complete chain of effects – from Sun to Earth – to better understand the dynamic evolution of the CME and its embedded magnetic field. We study in detail the solar surface and atmosphere associated with the flare and CME using the Solar Dynamics Observatory (SDO) and ground-based instruments. We also track the CME signature off-limb with combined extreme ultraviolet (EUV) and white-light data from the Solar Terrestrial Relations Observatory (STEREO). By applying the graduated cylindrical shell (GCS) reconstruction method and total mass to stereoscopic STEREO-SOHO (Solar and Heliospheric Observatory) coronagraph data, we track the temporal and spatial evolution of the CME in the interplanetary space and derive its geometry and 3D mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the magnetic cloud (MC) from in situ measurements from Wind. This is compared to nonlinear force-free (NLFF) model results, as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are lower in the interplanetary space by ～?50% and 75%, respectively, possibly indicating an erosion process. A CME mass increase of 10% is observed over a range of \({\sim}\,4\,\mbox{--}\,20~\mathrm{R}_{\odot }\). The temporal evolution of the CME-associated core-dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME.     

A Helicity-Based Method to Infer the CME Magnetic Field Magnitude in Sun and Geospace: Generalization and Extension to Sun-Like and M-Dwarf Stars and Implications for Exoplanet Habitability

Patsourakos et al. (Astrophys. J. 817, 14, 2016) and Patsourakos and Georgoulis (Astron. Astrophys. 595, A121, 2016) introduced a method to infer the axial magnetic field in flux-rope coronal mass ejections (CMEs) in the solar corona and farther away in the interplanetary medium. The method, based on the conservation principle of magnetic helicity, uses the relative magnetic helicity of the solar source region as input estimates, along with the radius and length of the corresponding CME flux rope. The method was initially applied to cylindrical force-free flux ropes, with encouraging results. We hereby extend our framework along two distinct lines. First, we generalize our formalism to several possible flux-rope configurations (linear and nonlinear force-free, non-force-free, spheromak, and torus) to investigate the dependence of the resulting CME axial magnetic field on input parameters and the employed flux-rope configuration. Second, we generalize our framework to both Sun-like and active M-dwarf stars hosting superflares. In a qualitative sense, we find that Earth may not experience severe atmosphere-eroding magnetospheric compression even for eruptive solar superflares with energies \({\approx}\, 10^{4}\) times higher than those of the largest Geostationary Operational Environmental Satellite (GOES) X-class flares currently observed. In addition, the two recently discovered exoplanets with the highest Earth-similarity index, Kepler 438b and Proxima b, seem to lie in the prohibitive zone of atmospheric erosion due to interplanetary CMEs (ICMEs), except when they possess planetary magnetic fields that are much higher than that of Earth.     

Cosmic-ray positrons: are there primary sources?

Galactic cosmic rays consist of primary and secondary particles. Primary cosmic rays are thought to be energized by first order Fermi acceleration processes at supernova shock fronts within our Galaxy. The cosmic rays that eventually reach the Earth from this source are mainly protons and atomic nuclei, but also include electrons. Secondary cosmic rays are created in collisions of primary particles with the diffuse interstellar gas. They are relatively rare but carry important information on the Galactic propagation of the primary particles. The secondary component includes a small fraction of antimatter particles, positrons and antiprotons. In addition, positrons and antiprotons may also come from unusual sources and possibly provide insight into new physics. For instance, the annihilation of heavy supersymmetric dark matter particles within the Galactic halo could lead to positrons or antiprotons with distinctive energy signatures. With the High-Energy Antimatter Telescope (HEAT) balloon-borne instrument, we have measured the abundances of positrons and electrons at energies between 1 and 50 GeV. The data suggest that indeed a small additional antimatter component may be present that cannot be explained by a purely secondary production mechanism. Here we describe the signature of the effect and discuss its possible origin.     

Multi-wavelength observations of the onset phase of a coronal mass ejection

The structure and dynamics of the initial phases of a coronal mass ejection (CME) seen in soft X-ray, extreme ultraviolet and optical emission are described. The event occurred on the SW limb of the Sun in active region AR 8026 on 9 April 1997. Just prior to the CME there was a class C1.5 flare. Images taken with the Extreme Ultraviolet Imaging Telescope (EIT) reveal the emergence of a candle-flame shaped extreme ultraviolet (EUV) cavity at the time of the flare. Yohkoh images, taken about 15 min later, show that this cavity is filled with hot X-ray emitting gas. It is most likely that this is the site of the flare. Almost simultaneous to the flare, an H surge or small filament eruption occurs about 50 arc sec northwards along the limb from the EUV cavity. At both the site of the core of the hot, EUV cavity and the filament ejection are X-ray jets. These jets seem to be connected by hot loops near their bases. Both jets disappear within a few minutes of one another.Clear evidence of the CME first appeared in the Large Angle Spectrometric Coronagraph (LASCO) and EIT images 40 min after the flare and onset of the filament ejection. It seems to come from a region between the two X-ray jets. This leads to the speculation that magnetic field reconnection near one footpoint of a loop system triggers reconnection near its other footpoint. The loop system is destabilized and ultimately gives rise to the CME. This possibility is supported by magnetic field and H images taken when the active region was at disk center which show that the active region had a double bipole structure with dark H filaments between the bipoles.     

Flares in Sigmoidal Coronal Structures – a Case Study

We analyze radio observations, magnetograms and extrapolated field line maps, Hα filtergrams, and X-ray observations of two flare events (6 February 1992 in AR 7042 and 25 October 1994 in AR 7792) and study properties, evolution and energy release signatures of sigmoidal loop systems. During both events, the loop configuration seen in soft X-ray (SXR) images changes from a preflare sigmoidal shape to a relaxed post-flare loop system. The underlying magnetic field system consists of a quadrupolar configuration formed by a sheared arcade core and a remote field concentration. We demonstrate two possibilities: a sigmoidal SXR pattern can be due to a single continuous flux tube (the 1992 event). Alternatively, it can be due to a set of independent loops appearing like a sigmoid (the 1994 event). In both cases, the preflare and post-flare loops can be well reproduced by a linear force-free field and potential field, respectively, computed using preflare magnetograms. We find that thermal and non-thermal flare energy release indicators of both events become remarkably similar after applying spatial and temporal scale transformations. Using the spatial scaling between both events we estimated that the non-thermal energy release in the second event liberated about 1.7 times more energy per unit volume. A two-and-a-half times faster evolution indicates that the rate of the energy release per unit volume is more than four times higher in this event. A coronal type II burst reveals ignition and propagation of a coronal shock wave. In contrast, the first event, which was larger and released about a 10 times more energy during the non-thermal phase, was associated with a CME, but no type II burst was recorded. During both events, in addition to the two-ribbon flare process an interaction was observed between the flaring arcade and an emerging magnetic flux region of opposite polarity next to the dominant leading sunspot. The arcade flare seems to stimulate the reconnection process in an `emerging flux-type' configuration, which significantly contributes to the energy release. This regime is characterized by the quasiperiodic injection of electron beams into the surrounding extended field line systems. The repeated beam injections excite pulsating broadband radio emission in the decimetric-metric wavelength range. Each radio pulse is due to a new electron beam injection. The pulsation period (seconds) reflects the spatial scale of the emerging flux-type field configuration. Since broadband decimetric-metric radio pulsations are a frequent radio flare phenomenon, we speculate that opposite-polarity small-scale flux intrusions located in the vicinity of strong field regions may be an essential component of the energy release process in dynamic flares.     

Hydrodynamic simulations of propagating warps and bending waves in accretion discs

We present the results of a study of propagating warp or bending waves in accretion discs. Three-dimensional hydrodynamic simulations were performed using smoothed particle hydrodynamics (SPH), and the results are compared with calculations based on the linear theory of warped discs.
We examine the response of a gaseous disc to an initially imposed warping disturbance under a variety of physical conditions. We consider primarily the physical regime in which the dimensionless viscosity parameter α < H r , where H r is the disc aspect ratio, so that bending waves are expected to propagate. We also performed calculations for disc models in which α > H r , where the warps are expected to evolve diffusively. Small-amplitude (linear) perturbations are studied in both Keplerian and slightly non-Keplerian discs, and we find that the results of the SPH calculations can be reasonably well fitted by those of the linear theory. The main results of these calculations are: (i) the warp in Keplerian discs when α < H r propagates with little dispersion, and damps at a rate expected from estimates of the code viscosity; (ii) warps evolve diffusively when α > H r ; (iii) the slightly non-Keplerian discs lead to a substantially more dispersive behaviour of the warps, which damp at a similar rate to the Keplerian case, when α < H r .
Initially imposed higher amplitude, non-linear warping disturbances were studied in Keplerian discs. The results indicate that non-linear warps can lead to the formation of shocks, and that the evolution of the warp becomes less wave-like and more diffusive in character.
This work is relevant to the study of the warped accretion discs that may occur around Kerr black holes or in misaligned binary systems, and is mainly concerned with discs in which α < H r . The results indicate that SPH can model the hydrodynamics of warped discs, even when using rather modest numbers of particles.     

The Intensity–Velocity Phase Spectra of Evanescent Oscillations and Acoustic Sources

There are three major issues in modeling solar evanescent oscillations: the variation of the intensity [I]–velocity [V] phase difference of p-modes close to the base of photosphere; the existence of a plateau of negative I–V phase differences below and between the ridges of the low-frequency p-modes; the explanation of the I–V cross-spectra of the evanescent oscillations. We present new interpretations for the first two issues, based on modeling intensity fluctuations taking steep temperature gradients, opacity, and non-adiabatic cooling into account. We also discuss consequences of our model for the explanation of power spectra and cross-power spectra of p-modes. In particular, we present evidence that the acoustic sources that generate evanescent waves produce a coherent background that explains the plateau–interridge regime of negative I–V phase difference.     

Modulational behavior of electromagnetic waves in ultra-relativistic electron-positron plasmas

The dynamical properties of electromagnetic (EM) waves in ultra-relativistic electron-positron (EP) plasmas are analytically investigated on the basis of the nonlinear governing equations obtained from a kinetic way. It is shown that the EM wave envelope will collapse and be trapped into a localized region for the modulation interaction with low frequency density variation induced by ponderomotive force. The correlation between the localized strong wave field and the pulsar radio emission is discussed.     

Five dimensional bulk viscous cosmological model with wet dark fluid in general relativity

In this paper, we have constructed a five dimensional LRS Bianchi type I cosmological model with wet dark fluid (WDF) in general relativity with the matter field described as bulk viscosity. It is found that in presence of bulk viscosity an inflationary effective stiff fluid cosmological model is obtained, whereas in absence of bulk viscosity the wet dark fluid degenerate to stiff fluid. Some physical and geometrical properties of the model are also discussed.     

Reionization and the Cosmic Dawn with the Square Kilometre Array

The Square Kilometre Array (SKA) will have a low frequency component (SKA-low) which has as one of its main science goals the study of the redshifted 21 cm line from the earliest phases of star and galaxy formation in the Universe. This 21 cm signal provides a new and unique window both on the time of the formation of the first stars and accreting black holes and the subsequent period of substantial ionization of the intergalactic medium. The signal will teach us fundamental new things about the earliest phases of structure formation, cosmology and even has the potential to lead to the discovery of new physical phenomena. Here we present a white paper with an overview of the science questions that SKA-low can address, how we plan to tackle these questions and what this implies for the basic design of the telescope.