Diurnal variation in rates of calcification and carbonate sediment dissolution in Florida Bay

Water quality and criculation in Florida Bay (a shallow, subtropical estuary in south Florida) are highly dependent upon the development and evolution of carbonate mud banks distributed throughout the Bay. Predicting the effect of natural and anthropogenic perturbations on carbonate sedimentation requires an understanding of annual, seasonal, and daily variations in the biogenic and inorganic processes affecting carbonate sediment precipitation and dissolution. In this study, net calcification rates were measured over diurnal cycles on 27 d during summer and winter from 1999 to 2003 on mud banks and four representative substrate types located within basins between mud banks. Substrate types that were measured in basins include seagrass beds of sparse and intermediate densityThalassia sp., mud bottom, and hard bottom communities. Changes in total alkalinity were used as a proxy for calcification and dissolution. On 22 d (81%), diurnal variation in rates of net calcification was observed. The highest rates of net carbonate sediment production (or lowest rates of net dissolution) generally occurred during daylight hours and ranged from 2.900 to −0.410 g CaCO₃ m⁻²d⁻¹. The lowest rates of carbonate sediment production (or net sediment dissolution) occurred at night and ranged from 0.210 to −1.900 g CaCO₃ m⁻² night⁻¹. During typical diurnal cycles, dissolution during the night consumed an average of 29% of sediment produced during the day on banks and 68% of sediment produced during the day in basins. Net sediment dissolution also occurred during daylight, but only when there was total cloud cover, high turbidity, or hypersalinity. Diurnal variation in calcification and dissolution in surface waters and surface sediments of Florida Bay is linked to cycling of carbon dioxide through photosynthesis and respiration. Estimation of long-term sediment accumulation rates from diurnal rates of carbonate sediment production measured in this study indicates an overall average accumulation rate for Florida Bay of 8.7 cm 1000 yr⁻¹ and suggests that sediment dissolution plays a more important role than sediment transport in loss of sediment from Florida Bay.     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

Molecular simulations of metal adsorption to bacterial surfaces

The atomic-scale interactions that occur between cations and the metal-binding cell wall components common to many gram-positive bacteria were investigated using molecular simulations techniques. We examined the adsorption of Cd and Pb onto peptidoglycan and teichoic acid components of the bacterial cell wall using classical energy force field methods. Within the framework of molecular mechanics and the Cerius² modeling software, we used energy minimization, conformational analysis, and molecular dynamics to examine the different components of the cell wall and to determine relative binding energies and structural configurations of the cell wall components, both with and without the metals present. Electronic structure calculations of representative metal-organic complexes validate the more practical classical methods required in simulating the large number of atoms associated with the cell wall components. The classical force field simulations were conducted in both gas phase and solvated periodic cells. Force field-based simulation techniques can adequately describe the interactions of Cd with the cell wall, defining both metal ion coordinations and binding distances. However, the classical force field approach is inconsistent in describing the observed Pb-cell wall interactions due to possible limitations in the force field parameters, the propensity for Pb to form hydroxides at circumneutral pH, or the dominance of other adsorption mechanisms.     

Retailing local food in the Scottish-English borders: A supply chain perspective

Local food is championed as one alternative response to industrial systems of food production and supply. While advocacy for local food is high, there is a lack of empirical evidence about the actual shape and scale of such food supply chains, especially from a retail perspective. Using supply chain diagrams, this paper presents a summary of ‘new’ agro-food geographies for five different retail types—farm shops, butchers, caterers, specialist shops, supermarkets/department stores—that all source local food from suppliers in the Scottish-English borders. Presented as five separate ‘shopping trips’, the paper examines where, how and why retailers source local food. Results reveal the complex nature of local food systems, especially in terms of intra-sector competitive dynamics (with a notable tension between direct forms of retail and established (independent) retailers), links and overlaps with ‘normal’ food retail systems and elastic notions of the ‘local’. The paper also draws a key distinction between locally produced and locally supplied food products.     

Assessment of the mycoflora of commercial poultry feeds sold in the humid tropical environment of Imo State, Nigeria

This study was carried out to identify the common moulds growing in selected commercial poultry feed sold in Owerri, Imo State, Nigeria. Forty-eight bulk samples derived froml92 bags of feeds were collected from broiler starter (BS), broiler finishers (BF), grower mash (GM) and layer mash (LM) across 4 different brands of ommercial poultry feeds, which included Livestock (LF), Top (TF) Guinea (GF) and Vital (VF) feeds. The feed samples were collected during the rainy season months of June, July and August. The common moulds isolated from these feeds were Aspergillus sp., Peicillium sp.,Mucor sp., Yeast sp., Rhizopus sp., Epicoecum sp., Gymnoaseus sp., Cladosporium sp., Mortierella sp. as well as Bacteria. Generally, more organisms were isolated in June than the other months with Mortierella sp. being the only one not isolated in that month. Vital feed with 8 different isolates had the highest diversity of fungal species while the others had between 4 and 5 species. Prevalence rates across the feed types, generally ranged from 18.76% in layer mash to 30.03% in broiler finisher. The four Aspergillus sp. isolated came from GM and BF. This study highlights the need for constant monitoring of moulds in commercial feedstuff produced in the humid tropical environments such as Imo state, Nigeria. There is also the need to routinely include fungal growth nhibitors in commercial feeds since moulds are capable of reducing the nutritional values of feedstuff as well as elaborating pathogenic toxins.     

Total organic carbon in soils and its relation with manganese concentrations in soils and vegetation close to an abandoned manganese mine

This study aimed at quantifying the total organic carbon (TOC) present in soils within the proximity of the Kgwakgwe Mn oxide ore abandoned mine, Botswana, and establish its relationship with Mn concentrations in soils and vegetation based on multivariate and Geographical Information Systems (GIS) analytical techniques. Four hundred soil samples and 200 vegetation set samples were obtained from a 4 km² area close to the abandoned mine. The TOC in soil samples were determined using a carbon/hydrogen/moisture determinator, and Mn concentrations in soils and vegetation by atomic absorption spectrophotometry. Results were processed using the statistical package for social science (SPSS), GIS, and Remote Sensing (RS) techniques with the Integrated Land and Water Information System (ILWIS), Geosoft Oasis Montaj and ArcGIS software packages. The values for TOC in the soil samples from the study area ranged from 0 wt % to 7.91 wt %, with a mean of 1.90 wt %, and at the control area, from 4.07 wt % to 4.86 wt %. The range of concentrations of Mn in soils was from 36 mg/g to 24908 mg/g and for Mn concentrations in the vegetation samples from 26 mg/g to 3611 mg/g with a mean of 598 mg/g. Results of correlation coefficients depicted very weak negative association except Mn in soils/Mn in leaves which was weak but positive. The statistical data yielded four clusters as follows: cluster one consisted mainly of Mn in leaves, cluster two was constituted of Mn in soils, and cluster four had TOC. Cluster three was dominated by the three parameters but with negative t statistic. The spatial presentation of data presented revealed little or no vegetation in the south eastern area and those close to the mine workings, and some significant vegetation in the north western part of the study area. The low TOC in the soils is associated to low vegetation cover which is considered to have been influenced by the soil clay fraction mineralogy and high concentrations of Mn.     

Effect of aluminum and chromium on the germination and growth of two Vigna species

The study deals with the effect of metal toxicity (aluminum, chromium and combination of both the metals) on seed germination, root length, shoot length, seedling length and dry biomass of Vigna radiata and V. sinensis. Chromium adversely affected the seedling by significantly reducing the growth whereas aluminum did not show such effect in both the species. Percentage of germination was good in both the species at different concentration of treatment (aluminum, chromium and combined treatment). Shoot length was also not much affected in V. sinensis as it was greatly inhibited in V. radiata. Both the species showed the purpling of stem. Dry biomass of V. radiata showed positive effect than V. sinensis. However, dry biomass decreased to a lesser extent when treated with aluminum, chromium and combined treatment as compared to control.     

High rate anaerobic treatment of Sago wastewater using HUASB with PUF as carrier

Sago industry is one of the major small-scale sectors in India and over 800 units are located in the southern State of Tamilnadu. Processing of sago generates enormous quantities of high strength wastewater requiring systematic treatment prior to disposal. The present study is an attempt to treat the sago wastewater using Hybrid Upflow Anaerobic Sludge Blanket (HUASB) reactor, which offers the advantages of both fixed film and up flow anaerobic sludge blanket treatment. HUASB reactor with a volume of 5.6 L was operated at Organic Loading Rates varying from 10.7 to 24.7 kg COD/m³.day. After 130 days of startup, the reactor produced appreciable decrease in COD of wastewater and removed solids efficiently. The COD removal varied from 91–87%. While the removal of Total Solids was in the range of 61–57%, that of volatile solids varied from 70–67%. The ideal OLR for the reactor was 23.5 kg COD/m³.day. The findings of the study open up newer possibilities of design low cost and compact onsite treatment systems with very short retention periods.     

Production of rhamnolipids by Pseudomonas aeruginosa growing on carbon sources

Arhamnolipid producing bacterium, Pseudomonas aeruginosa was previously isolated from Iranian oil over years. Isolated strain was identified by morphological, biochemical, physiological and 16 sr RNA (1). Glycolipid production by isolated bacterium using sugar beet molasses as a carbon and energy source was investigated. Biosurfactant production was quantified by surface tension reduction, Critical Micelle Dilution (CMD), Emulsification Capacity (EC), and Thin Layer Chromatogeraphy. biosurfactants during growth on waste Dates as the primary carbon and nitrogen sources, respectively. After 48 h of growth the culture supernatant fluid had a rhamnose concentration of 0.18 g/L and surface tension was reduced to 20 mN/m ( %).( reduced the interfacial tension against crude oil from 21 mN/m to 0,47 mN/m) Result from the study showed that the growth of the bacteria using molasses as carbon sources is growth-associated. The specific production rate of rhamnolipid with 2 %, 4 %, 6 %, 8 % and 10 % of molasses are 0.00065; 4.556; 8.94; 8.85; and 9.09. respectively The yield of rhamnolipid per biomass with 2%,4%,6%,8% and 10% molasses are 0.003;0.009;0.053;0.041 and 0.213 respectively. The production of rhamnolipid (0.0531 g rhamnolipid/g biomass) is higher compare to the culture grown in aerobic condition (0.04 g rhamnolipid/g biomass).The rhamnolipids were able to form stable emulsions with n-alkanes, aromatics, crude oil and olive oil. These studies indicate that renewable, relatively inexpensive and easily available resources can be used for important biotechnological processes.     

Rectangular tank surface aerators: scale up criteria and energy conservation

Surface aeration experiments were conducted in two types of rectangular tanks of aspect ratios i.e., length to width ratio (L/W) of 1.5 and 2 and developed simulation equations to correlate the oxygen transfer coefficient, k and power number, P₀ with a parameter governing theoretical power per unit volume X. The parameter X is defined as equal to F^4/3R^1/3, where F and R are impellers’ Froude and Reynolds numbers respectively). Results have shown that the P₀ can not be simulated singularly with either Reynolds number, R or Froude number, F, which results in scale-effects; there appears to be a need to incorporate the effects of both F and R. It was found that P⁰ is uniquely related to X for rectangular aeration tanks of both aspect ratios, however, such relationships are different depending upon the aspect ratios. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size.