Characterization of diurnal cycles in ZTD from a decade of global GPS observations

The diurnal cycle of the tropospheric zenith total delay (ZTD) is one of the most obvious signals for the various physical processes relating to climate change on a short time scale. However, the observation of such ZTD oscillations on a global scale with traditional techniques (e.g. radiosondes) is restricted due to limitations in spatial and temporal resolution. Nowadays, the International GNSS Service (IGS) provides an important data source for investigating the diurnal and semidiurnal cycles of ZTD and related climatic signals. In this paper, 10 years of ZTD data from 1997 to 2007 with a 2-hour temporal resolution are derived from global positioning system (GPS) observations taken at 151 globally distributed IGS reference stations. These time series are used to investigate diurnal and semidiurnal oscillations. Significant diurnal and semidiurnal oscillations of ZTD are found for all GPS stations used in this study. The diurnal cycles (24 hours period) have amplitudes between 0.2 and 10.9 mm with an uncertainty of about 0.5 mm and the semidiurnal cycles (12 h period) have amplitudes between 0.1 and 4.3 mm with an uncertainty of about 0.2 mm. The larger amplitudes of the diurnal and semidiurnal ZTD cycles are observed in the low-latitude equatorial areas. The peak times of the diurnal cycles spread over the whole day, while the peak value of the semidiurnal cycles occurs typically about local noon. These GPS-derived diurnal and semidiurnal ZTD signals are similar with the surface pressure tides derived from surface synoptic pressure observations, indicating that atmospheric tides are the main driver of the diurnal and semidiurnal ZTD variations.     

Biodegradation of <Emphasis Type="Italic">Enteromorpha</Emphasis> polysaccharides by intestinal micro-community from <Emphasis Type="Italic">Siganus oramin</Emphasis>

Micro-communities are supposed to have more potential functions of biodegradation of polysaccharides than single strain; however, the intestinal micro-communities involved in the biodegradation of Enteromorpha polysaccharides (EP) were seldom reported. In order to obtain the EP-degrading micro-community, the intestines of Siganus oramin was obtained to isolate the micro-communities, which were enriched by 0.3% of EP as the sole carbon source. A stable micro-community with EP degradative capability was achieved after seven generations of subculture, named H1. Results showed that H1 was able to degrade 75% of EP within 24 hours, and the activity of EP lyases reached 500 U mL^?1 in 32 hours. With denaturing gradient gel electrophoresis (DGGE) and 16S rRNA gene clone library analysis, ten bacteria closely related to Marinomonas pontica, Microbacterium sp., Leucobacter chironomi, Cyclobacterium sp., Algoriphagus winogradskyi, Pseudoalteromonas sp. and Vibrio sp. were determined. Furthermore, compared with the DGGE bands sequence and the clone library analysis, the dominant bacteria of the EP-biodegrading micro- community were Pseudoalteromonas sp. and Vibrio sp., with the respective proportion of 38% and 46%, and they should play an important role in EP degradation together with other degrading bacteria in the micro-community H1.     

Nonlinear Atmospheric and Climate Dynamics in China （2003-2006）： A Review

Recent advances in the study of nonlinear atmospheric and climate dynamics in China （2003 2006） are briefly reviewed. Major achievements in the following eight areas are covered： nonlinear error dynamics and predictability; nonlinear analysis of observational data; eddy-forced envelope Rossby soliton theory; sensitivity and stability of the ocean＇s thermohaline circulation; nonlinear wave dynamics; nonlinear analysis on fluctuations in the atmospheric boundary layer; the basic structures of atmospheric motions; some applications of variational methods.     

Dynamic river–groundwater exchange in the presence of a saline,semi‐confined aquifer

Understanding groundwater–surface water exchange in river banks is crucial for effective water management and a range of scientific disciplines. While there has been much research on bank storage, many studies assume idealized aquifer systems. This paper presents a field‐based study of the Tambo Catchment (southeast Australia) where the Tambo River interacts with both an unconfined aquifer containing relatively young and fresh groundwater (<500 μS/cm and <100 years old) and a semi‐confined artesian aquifer containing old and saline groundwater (electrical conductivity > 2500 μS/cm and >10 000 years old). Continuous groundwater elevation and electrical conductivity monitoring within the different aquifers and the river suggest that the degree of mixing between the two aquifers and the river varies significantly in response to changing hydrological conditions. Numerical modelling using MODFLOW and the solute transport package MT3DMS indicates that saline water in the river bank moves away from the river during flooding as hydraulic gradients reverse. This water then returns during flood recession as baseflow hydraulic gradients are re‐established. Modelling also indicates that the concentration of a simulated conservative groundwater solute can increase for up to ~34 days at distances of 20 and 40 m from the river in response to flood events approximately 10 m in height. For the same flood event, simulated solute concentrations within 10 m of the river increase for only ~15 days as the infiltrating low‐salinity river water drives groundwater dilution. Average groundwater fluxes to the river stretch estimated using Darcy's law were 7 m³/m/day compared with 26 and 3 m³/m/day for the same periods via mass balance using Radon (²²²Rn) and chloride (Cl), respectively. The study shows that by coupling numerical modelling with continuous groundwater–surface water monitoring, the transient nature of bank storage can be evaluated, leading to a better understanding of the hydrological system and better interpretation of hydrochemical data. Copyright © 2015 John Wiley & Sons, Ltd.     

Tracing groundwater flow and sources of organic carbon in sandstone aquifers using fluorescence properties of dissolved organic matter (DOM)

The fluorescence properties of groundwaters from sites in two UK aquifers, the Penrith Sandstone of Cumbria and the Sherwood Sandstone of South Yorkshire, were investigated using excitation–emission matrix (EEM) fluorescence spectroscopy. Both aquifers are regionally important sources of public supply water and are locally impacted by pollution. The Penrith Sandstone site is in a rural setting while the Sherwood Sandstone site is in suburban Doncaster. Fluorescence analysis of samples from discrete sample depths in the Penrith Sandstone shows decreasing fulvic-like intensities with depth and also shows a good correlation with CFC-12, an anthropogenic groundwater tracer. Tryptophan-like fluorescence centres in the depth profile may also provide evidence of rapid routing of relatively recent applications of organic slurry along fractures. Fluorescence analysis of groundwater sampled from multi-level piezometers installed within the Sherwood Sandstone aquifer also shows regions of tryptophan-like and relatively higher fulvic-like signatures. The fluorescence intensity profile in the piezometers shows tryptophan-like peaks at depths in excess of 50 m and mirrors the pattern exhibited by microbial species and CFCs highlighting the deep and rapid penetration of modern recharge due to rapid fracture flow. Fluorescence analysis has allowed the rapid assessment of different types and relative abundances of dissolved organic matter (DOM), and the fingerprinting of different sources of organic C within the groundwater system. The tryptophan:fulvic ratios found in the Penrith Sandstone were found to be between 0.5 and 3.0 and are characteristic of ratios from sheep waste sources. The Sherwood Sandstone has the lowest ratios (0.2–0.4) indicating a different source of DOM, most likely a mixture of terrestrial and microbial sources, although there is little evidence of pollution from leaking urban sewage systems. Results from these two studies suggest that intrinsic fluorescence may be used as a proxy for, or complementary tool to, other groundwater investigation methods in helping provide a conceptual model of groundwater flow and identifying different sources of DOM within the groundwater system.     

The spatial implications of the functional proximity deriving from air passenger flows between European metropolitan urban regions

Until recently the traditional spatial configuration of the European geography was based upon the core-periphery model. The ‘pentagon’, broadly defined as lying between London, Paris, Milan, Munich and Hamburg, was seen as the core area characterised by having the highest concentration of economic development in the European Union (EU), with the remainder of the European territory viewed as peripheral, albeit to varying degrees. In a number of cases such peripheral areas equated with clear regional disparities. The elaboration of the European Spatial Development Perspective (ESDP) (CEC, European spatial development perspective, towards balanced and sustainable development in the territory of the European Union, 1999) challenged this core-periphery model. European spatial planning policies, aimed at encouraging social and economic, and with ever increasing importance, territorial cohesion, seek amongst other aspects to encourage the development of a balanced and polycentric urban system. This paper adopts a network analysis approach to the analysis of air passenger flows between some 28 principal European metropolitan urban regions. The evaluation of these flows contributes to an enhanced comprehension of the spatial dynamics of the European metropolitan territory which goes beyond that deriving from the more standard analyses of the individual components of the urban system. Several indicators are used, deriving from gravitational modelling techniques, to analyse the complexity of the air passenger flows. A multidimensional scaling (MDS) technique is introduced in order to interpret and visualise the resulting spatial configuration and positioning of the different metropolitan centres within the conceptual European ‘space of air passenger flows’, thereby contrasting with the more traditional map-based geographical image of Europe, based upon Cartesian coordinates.

Hydraulic Conductivity Tests for Evaluating Compatibility of Lateritic Soil—Fly Ash Mixtures with Municipal Waste Leachate

Long term competent performance of liner systems is a critical issue in the design and construction of waste repositories due to adverse interactions associated with leachate generated by wastes. This study was conducted to verify the efficacy of fly ash stabilization in enhancing compatibility between lateritic soil and municipal waste leachate. Applications investigated include soil mixtures containing 0, 5, 10, 15, and 20% fly ash compacted at approximately 2% wet of optimum moisture content with modified proctor energy. Baseline hydraulic conductivity was first established at every level of fly ash content by permeating soil mixtures with tap water before permeation with leachate in a compaction mould permeameter using the falling head test method. Results show that the trend in hydraulic conductivity of specimen containing 0% fly ash was characterized by a gradual but erratic decrease which may suggests partial entry of the leachate cations into the double layer. Conversely, specimens containing fly ash showed a general trend consisting of an initial drop in k (up to an order of magnitude) that was followed by slight decrease sustained until k stabilized and later terminated. Above 10% fly ash content, the relatively high values of k observed was not connected with the reactivity of the soil mixtures with leachate, rather it may be attributed to excessive fly ash content that altered their textural and hydraulic properties. The result of this study is potentially significant in the assessment of fly ash as a compatibility enhancing agent which can be admixed in barrier materials that are susceptible to adverse reactions with the liquid to be contained.     

Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.     

Some observations from the data taken in and around Kharagpur during the onset of the monsoon, 1990

During MONTBLEX 1990, various observational platforms were operated at Kharagpur and the nearby Kalaikunda Air Base. Using the data from all the platforms, one can draw the following conclusions. The temperature and wind data obtained from various sensors have overall compatibility. Sodar wind data indicate the presence of a low level jet at around 300 m above ground. The inversion height may be evaluated from the vertical profile of the sodar back-scatter echo intensity. The sub-synoptic or synoptic scale convergence modulates the inversion height and the presence of cloud-base within the inversion height in turn modulates the sensible heat and momentum fluxes.