A case study of a modified gravity type cage and mooring system using numerical and physical models

A modified gravity-type cage, developed by SADCO Shelf Ltd., was examined using numerical and physical models to determine if the cage and mooring system is suitable for an exposed site south of the Isles of Shoals, NH. The 3000-m/sup 3/ SADCO Shelf Submersible Fish Cage has angled stays between the upper framework and the ballasted bottom rim (in addition to net) to resist the horizontal shear deformation. The mooring system consists of three legs-each made up of a taut vertical chain and an angled rope, both leading to deadweight anchors. Normalized response amplitudes (response amplitude operators) were found for motion response in heave, surge and pitch, and load response in the anchor and bridle lines, in regular (single frequency) waves. In addition, a stochastic approach was taken to determine the motion and load transfer functions in random waves using a spectrum representative of seas at the selected site. In general, the system motion had a highly damped response, with no resonant peaks within the wave excitation range of 0.05 to 0.45 Hz. The anchor line force response was at all frequencies below 5 kN per meter of wave amplitude. The physical model tests showed consistently more conservative (larger) results compared to those for the numerical model.     

Experimental investigation of forces and geometry of a net cage in uniform flow

A scale model of a flexible circular net with different weights attached to the bottom was tested in a flume tank. Global forces and net deformation were measured for different steady current velocities. Three different sizes of bottom weights were used in the tests. The results from these tests are presented and discussed with the emphasis on the dependency between the forces and the geometry. Comparison is also made to empirical based formulas for calculation of drag and lift forces on net structures. Findings show that i) the forces on, and deformation of a flexible net structure are mutually highly dependent on each other; ii) estimates of global forces on a flexible net structure calculated using simple drag formulas derived from stiff net panel experiments give large errors when compared to experimental measurements; iii) numerical models taking into account the dependency between force and deformation should be used to obtain accurate estimates of forces on flexible net structures; and iv) the forces on a flexible net structure are dependent on Reynolds number, and their dependency are similar to that of a regular cylinder.     

Impact of urban stormwater runoff on estuarine environmental quality

Urban stormwater runoff could contribute to the deterioration of water quality of a receiving water body. In this research, field studies and laboratory experiments were conducted to assess the microbial contamination resulting from urban stormwater runoff into the Lake Pontchartrain estuary. Fecal coliform, Escherichia coli and enterococci were used as indicator organisms. The specific objectives of the research were to examine the distribution of the indicator organisms in different environmental elements (water column, suspended particles and sediment) and to further investigate the mechanisms related to their fate. Results of the research indicated satisfactory water quality at the study sites during dry weather periods. However, a significant increase was observed in the concentrations of the indicator organisms in the water columns and sediment at specific study sites following a given stormwater event. Three to seven days were needed for the elevated indicator organisms to return back to their background levels in the water column and sediment, respectively. The mechanism of sedimentation contributed to a reduction in the microbial concentration in the water column, as the indicator organisms were found to attach to the suspended particles in the stormwater. The percentage of fecal coliform, E. coli and enterococci attached to the suspended particles was found to be within the range of 9.8–27.5%, 21.8–30.4%, and 8.4–11.5% of the total indicator organisms in the stormwater loaded into the estuary, respectively. About 75–80% of the total indicator organisms remained free-floating for some distance in the water column before dying off.     

The dynamic behaviour of a river-dominated tidal inlet, River Murray, Australia

Australia's largest river, the River Murray, discharges to the southern ocean through a coastal lagoon and river-dominated tidal inlet. Increased water extractions upstream for irrigation have led to significantly reduced flows at the mouth and, as a result, the area is undergoing rapid change, particularly with regard to the rate at which sediment is being transported into the lagoon. Based on detailed and accurate bathymetric surveys it has been possible to estimate that the rate of lagoon in-filling is of the order of 100,000 m³ per year for the period June 2000 to May 2003, although the actual rate shows significant year to year variability. Dredging of the lagoon commenced in 2000 in an attempt to reverse the trend.In an effort to understand the behaviour of the inlet a one-dimensional numerical model of the inlet has been developed. The model extends the original of van de Kreeke by including a dynamic inlet throat area based on predicted river flows and a sediment transport module to predict the resulting net sediment transport. Comparisons with water level data collected on both the ocean and lagoon sides of the mouth have shown that the model is able to predict the attenuation and lag of the tidal signal reasonably well. The sediment transport model was based on predicted sediment concentrations in the surf zone and was found to predict the rate of sediment in-filling to an acceptable level of accuracy. It is envisaged that the model will be a useful management tool, especially since it is possible to manipulate river discharges to the mouth.     

Surface circulation of the Levantine Basin: Comparison of model results with observations

The eastern Mediterranean (Levantine Basin) hydrography and circulation are investigated by comparing the results of a high-resolution primitive equation model with observations. After a 10-year integration, the model is able to reproduce the major water masses and the circulation patterns of the eastern Mediterranean. Comparisons with the POEM hydrographical observations show good agreement. The vertical distribution of the water masses matches that of the observations quite well in terms of monthly mean. The model surface circulation is in agreement with circulation schemes derived from recent observations. Some well-known mesoscale features of the upper thermocline circulation are also realistically reproduced. In agreement with satellite observations, the model shows that high-energy mesoscale eddies dominate the upper thermocline circulation in the southern and the central parts of the Levantine Basin. Most of the Atlantic Water follows the north African coast and forms a strong coastal jet near the Libyan coast rather than forming the Mid-Mediterranean Jet described by several authors. The sub-basin circulation shows a strong seasonal signal. A strong and stable current flows along the isobaths in winter, becoming weaker and with more meanders in summer. The mesoscale eddies throughout the whole basin are more energetic in summer than in winter.     

Radiation-Geochemical Stability of Bottom Sediments in the Ob and Yenisei Estuaries and Adjacent Shoal Area of the Kara Sea

Oceanology - This paper reports the results of investigations on the radioecological state of bottom sediments of the Ob–Yenisei shoal area and Ob and Yenisei estuaries. Materials were...     

Short period internal waves over the Huanghe (Yellow River) delta front

Internal waves with periods of about 5 minutes and trough to crest heights of up to 6.2 m were observed acoustically over the actively accreting delta front of the Huanghe (Yellow River) in the western portion of the Gulf of Bohai, Peoples Republic of China. The radian frequency of the internal waves was close to the locally-observed Brunt-Vaisala frequency. Through the relatively short (one hour) duration of an internal wave train, the amplitude was observed to decrease progressively with time. These internal waves may cause resuspension of delta-front sediments.     

A new methodology developed by cetena to assess the seakeeping behaviour of marine vessels

The paper describes an analytical method to determine an operability index for a marine vehicle when its geometric characteristics, the geographical area in which the vessel is supposed to operate, and the limiting criteria for operations are known. The computer program based on strip theory provides reliable results not only for conventional hullforms, but also for catamarans, offshore vehicles, etc. The results are presented in the form of figures for different vessels, namely, crane barge, naval vessels and SWATH type catamarans. The authors are of the opinion that the proposed method would provide the designer with a valid tool to improve the seakeeping qualities of a vessel, while taking into account the limiting conditions imposed due to seaway operations.     

A note on wave action conservation in a dissipative current wave motion

We consider steady, slowly varying water waves propagating on a steady current over a gently sloping bed, so-called current depth refraction. All expressions are correct to second order in wave amplitude. Formulating the energy equation for the fluctuating motion in terms of wave action (wave energy divided by intrinsic angular frequency) results in an expression, where the dissipative term is strikingly similar to wave action itself. It is simply the ‘extra’ dissipation (per unit area) caused by the fluctuating motion (i.e. total dissipation minus the effect of current acting on total mean bed shear stress) divided by the intrinsic angular frequency. We call it ‘wave action dissipation’. An inconsistency in Phillips' (1977) book is pointed out. A new formula for the calculation of wave amplitudes along rays is set forth.