Anisotropy of turbulent transport in a convective layer

An estimate for the anisotropy of the turbulent viscositys is given in a convective layer heated from below and rotating around a vertical axis. In the case of two-dimensional convection, there is a stationary regime withs⊇2 regardless of the rotation. In the case of three-dimensional convection in a slowly rotating layer (with the Taylor number equal to 1600), nonstationary turbulent regimes take place withs⊇1.6 forR=2.5×10⁴ (R is the Rayleigh number) ands⊇1.2 forR=10⁴. The parameters plays an, important role in the theory of differential rotation of the convective solar or stellar envelopes. So far, it has been evaluated empirically or semi-empirically. Some prospects in the development of the theory of differential rotation are discussed here in terms of the moment theory of hydrodynamic fields. The relation between this strict approach and an anisotropic viscosity approximation is considered.     

A simulation study of distortion of the heliospheric sheet caused by solar activity

During major geomagnetic storms, the interplanetary magnetic field angle φ (phi) changes often abruptly, either from 135° to 315° or 315° to 135°, suggesting that the heliospheric current sheet is pushed upward or downward by disturbed solar wind. The distortion of the heliospheric current sheet by three successive solar flares is simulated to show that such a flapping motion can occur.     

Pb, Sr and Nd isotope study of two co-existing magmas in the Nízke Tatry Mountains, Western Carpathians (Slovakia)

Summary Two co-existing plutonic rocks (diorite and granodiorite) were studied from an intrusion of Variscan age in the Raztocna Valley – Nízke Tatry Mountains, Western Carpathians. Geochemical analyses of major and trace elements constrain a volcanic arc as emplacement environment and give the first hints of a mixture of two magmatic end-members: the so-called Prasivá granodiorite and the Raztocna diorite. The ⁸⁷Sr/⁸⁶Sr₍₀₎ ratios vary between 0.7075 and 0.7118, the ε Nd₍₀₎ values range from −1.4 to −5.0. Common Pb isotopes reveal a dominant crustal source with minor influences from a mantle and a lower crustal source. Modelling based on Sr and Nd isotope data and using three component mixing calculations indicates that mixing of 2/3 of upper mantle material with 1/3 upper crustal material can produce the isotopic composition of the Raztocna diorite. Very minor amounts of lower crust were incorporated in the diorite. For the Prasivá granodiorite, the mixing ratio of upper mantle and upper crust is similar, but a lower crustal reservoir contributed about 5–10% of the source material.     

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.     

A simulation tool for high data-rate acoustic communication in ashallow-water, time-varying channel

The paper discusses the development of a simulation tool to model high data-rate acoustic communication in shallow water. The simulation tool is able to generate synthetic time series of signals received at a transducer array after transmission across a shallow-water communication channel. The simulation tool is suitable for testing advanced signal processing techniques for message recovery. A channel model has been developed based on the physical aspects of the acoustic channel. Special emphasis has been given to fluctuations of the signal transmission caused by time-varying multipath effects. At shorter ranges, the temporal variations are dominated by acoustic scattering from the moving sea surface. Therefore, the channel model produces a coherence function which may be interpreted as a time-varying reflection coefficient for the surface scattered acoustical path. A static, range-independent ray model identifies the significant multipaths, and the surface path is modulated with the time-varying reflection coefficient. The advantages and limitations of the channel model are discussed and assumptions necessary to overcome the limitations are emphasised. Based on the assumptions, an algorithm has been developed and implemented to model how a binary message will be modulated when transmitted by a transducer, is distorted in the channel and finally is received by a transducer array     

Analysis of a “flickering” Geminid fireball

Abstract— In the early morning hours of December 13, 2002, a bright Geminid fireball with an absolute magnitude of ?9.2 ± 0.5 was observed from Southern Saskatchewan, Canada. The fireball displayed distinct small‐scale oscillations in brightness, or flickering, indicative of the parent meteoroid being both non‐spherical and rotating. Using the light curve derived from a calibrated radiometer, we determine a photometric mass of 0.429 ± 0.15 kg for the meteoroid, and we estimate from its initial rotation rate of some 6 Hz that the meteoroid was ejected from the parent body (3200) Phaethon some 2500 ± 500 years ago. We find that 70% of Geminid fireballs brighter than magnitude ?3 display distinct flickering effects, a value that is in stark contrast to the 18% flickering rate exhibited by sporadic fireballs. The high coincidence of flickering and the deep atmospheric penetration of Geminid fireballs are suggestive of Geminid meteoroids having a highly resilient structure, a consequence, we suggest, of their having suffered a high degree of thermal processing. The possibility of Gemind material surviving atmospheric ablation and being sampled is briefly discussed, but the likelihood of collecting and identifying any such material is admittedly very small.     

The variability of Mercury's exosphere by particle and radiation induced surface release processes

Mercury's close orbit around the Sun, its weak intrinsic magnetic field and the absence of an atmosphere (P_surface<1×10⁻⁸ Pa) results in a strong direct exposure of the surface to energetic ions, electrons and UV radiation. Thermal processes and particle-surface-collisions dominate the surface interaction processes leading to surface chemistry and physics, including the formation of an exosphere (N?10¹⁴ cm⁻²) in which gravity is the dominant force affecting the trajectories of exospheric atoms. NASA's Mariner 10 spacecraft observed the existence of H, He, and O in Mercury's exosphere. In addition, the volatile components Na, K, and Ca have been observed by ground based instrumentation in the exosphere. We study the efficiency of several particle surface release processes by calculating stopping cross-sections, sputter yields and exospheric source rates. Our study indicates surface sputter yields for Na between values of about 0.27 and 0.35 in an energy range from 500 eV up to 2 keV if Na⁺ ions are the sputter agents, and about 0.037 and 0.082 at an energy range between 500 eV up to 2 keV when H⁺ are the sputter agents and a surface binding energy of about 2 eV to 2.65 eV. The sputter yields for Ca are about 0.032 to 0.06 and for K atoms between 0.054 to 0.1 in the same energy range. We found a sputter yield for O atoms between 0.025 and 0.04 for a particle energy range between 500 eV up to 2 keV protons. By taking the average solar wind proton surface flux at the open magnetic field line area of about 4×10⁸ cm⁻² s⁻¹ calculated by Massetti et al. (2003, Icarus, in press) the resulting average sputtering flux for O is about 0.8-1.0×10⁷ cm⁻² s⁻¹ and for Na approximately 1.3-1.6×10⁵ cm⁻² s⁻¹ depending on the assumed Na binding energies, regolith content, sputtering agents and solar activity. By using lunar regolith values for K we obtain a sputtering flux of about 1.0-1.4×10⁴ cm⁻² s⁻¹. By taking an average open magnetic field line area of about 2.8×10¹⁶ cm² modelled by Massetti et al. (2003, Icarus, in press) we derive an average surface sputter rate for Na of about 4.2×10²¹ s⁻¹ and for O of about 2.5×10²³ s⁻¹. The particle sputter rate for K atoms is about 3.0×10²⁰ s⁻¹ assuming lunar regolith composition for K. The sputter rates depend on the particle content in the regolith and the open magnetic field line area on Mercury's surface. Further, the surface layer could be depleted in alkali. A UV model has been developed to yield the surface UV irradiance at any time and latitude over a Mercury year. Seasonal and diurnal variations are calculated, and Photon Stimulated Desorption (PSD) fluxes along Mercury's orbit are evaluated. A solar UV hotspot is created towards perihelion, with significant average PSD particle release rates and Na fluxes of about 3.0×10⁶ cm⁻² s⁻¹. The average source rates for Na particles released by PSD are about 1×10²⁴ s⁻¹. By using the laboratory obtained data of Madey et al. (1998, J. Geophys. Res. 103, 5873-5887) for the calculation of the PSD flux of K atoms we get fluxes in the order of about 10⁴ cm⁻² s⁻¹ along Mercury's orbit. However, these values may be to high since they are based on idealized smooth surface conditions in the laboratory and do not include the roughness and porosity of Mercury's regolith. Further, the lack of an ionosphere and Mercury's small, temporally and spatially highly variable magnetosphere can result in a large and rapid increase of exospheric particles, especially Na in Mercury's exosphere. Our study suggests that the average total source rates for the exosphere from solar particle and radiation induced surface processes during quiet solar conditions may be of the same order as particles produced by micrometeoroid vaporization. We also discuss the capability of in situ measurements of Mercury's highly variable particle environment by the proposed NPA-SERENA instrument package on board ESA's BepiColombo Mercury Planetary Orbiter (MPO).