Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Kirsch problem and the lower natural frequencies of a clamped square-plate

A clamped square-plate is subjected to a uniform state of stress in the x-direction. The present study deals with the basic question of determining the variation of the lower natural frequencies of transverse vibration of a plate as a small diameter, central hole is made in it, introducing a stress concentration field.     

Geomorphology and sedimentology of the continental shelf adjacent to Mac. Robertson Land,East Antarctica: A scalped shelf

During the Quaternary, the Mac. Robertson shelf of East Antarctica was deeply eroded by glaciers and currents exposing the underlying basement, resulting in a scalped shelf. Major geomorphic zones are: (1) high-relief, ridge and valley topography (200–1400 m); (2) smooth sea floors associated with low-energy, depositional shelf valleys and basins (400–800 m); (3) low-relief, planated banktops (100–200 m); and (4) iceberg gouged and current reworked seaward-bank margins and upper slope (200 to < 630 m). About 90% of the shelf's surface has net erosional conditions and about 10% is net depositional. The sedimentary processes and deposits may be common to large areas of the East Antarctic margin.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

Dynamic response of dolos armor units to drop test impact loads

Dolos concrete units have been used extensively throughout the world for the protection of shorelines and rubble structures. A three-dimensional finite element model is used to determine the states of dynamic stress in dolosse with varying dimensions and concrete properties. An analytical procedure is developed which accurately predicts the tensile stress in the shank and horizontal fluke of dolosse subject to drop test loading conditions Numerical examples are presented which illustrate the application of prediction and iso-stress equations.     

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.     

Chlorinated hydrocarbons and hatching success in Baltic herring spring spawners

Eggs from 69 females of spring spawning herring from the German Baltic coast (Travemünde, April 1979) were incubated in clean sea water (20‰ S, temperature 8°C) under standard conditions. Sixty-one trials could be used for the evaluation of hatching success. Viable hatch was taken as a measure to evaluate the effects of chlorinated hydrocarbons accumulated in gonads, liver and muscle of parental fish.PCB levels in running ripe females ranged on a wet weight basis between 19 and 241 ng g^?1 (gonad), 20 and 377 ng g^?1 (liver) and 11 and 1820 ng g^?1 (muscle). Concentrations of other chlorinated hydrocarbons (DDD, DDE, γ-HCH, etc.) were in the same range as reported by other authors for Baltic herring (Huschenbeth, 1973, 1977). Viable hatch was significantly affected at ovary DDE concentrations higher than 18 ng g^?1 (wet wt) and PCB concentrations of more than 120 ng g^?1 (wet wt).Results are compared with data obtained during earlier investigations with flounder eggs.     

Implementation of High Resolution Tidal Current Fields in Electronic Navigational Chart Systems

A system for displaying tidal currents in an electronic chart display and information system (ECDIS) has been developed and implemented in compliance with the standards of the International Hydrographic Organization (IHO). The tidal current fields can be displayed in real time on the electronic navigational chart and several options and functions for updating and zooming have been designed. The current fields are calculated from a data base with the harmonic constants for the four major tidal constituents. The harmonic constants are obtained from a high resolution numerical model with horizontal grid resolution of 100 m. The model is validated by comparing with sea level and current measurements. The depth matrix for the central part of the model domain was calculated from data from multibeam bathymetric surveys. An application example of the implementation is given for Trondheimsleia, a part of the main sailing route along the western coast of Norway.     

Protracted Environmental Issues on a Proposed Titanium Minerals Development in Kenya's South Coast

This study takes cognizance of the fact that the TIOMIN (TIOMIN Resources Inc. of Canada) project has resulted in controversy over its handling of environmental issues and especially the Environmental Impact Assessment (EIA). The authors address many of the protracted issues that have slowed the development of the mining project in Kwale. The main emphasis is on the impacts of the mining and mineral separation processes on the environment, including the governing legislation, the role of consultation and public participation, and socioeconomic issues. In their public documents TIOMIN has specified neither the type of minerals it wants to extract from the area nor their chemical composition. It is well known, however that the titanium minerals and zircon targeted have impurities of iron, thorium and uranium. In the absence of an Environmental Management Plan, the effects of stockpiling radioactive wastes and other impurities that could possibly lead to environmental degradation in both the terrestrial and marine environments have not been publically addressed. The measures proposed to mitigate ecological damage as a result of the establishment of a minerals processing plant in the area seem inadequate. Pollution resulting from accidental spillage or breakage could have significant impact on marine life and residents living near the mining site. Other issues that have not been addressed satisfactorily pertain to the use of surface and underground water. The area already faces a huge water deficit and the calculations presented on aquifer recharge and stream flow rates do not indicate the large quantities of water that would be required in the mineral processing plant. The project, if approved in its present state, risks violation of international conventions. Furthermore, it could cause a conflict between Kenya and Tanzania in the event of an oil spill at the proposed ship loading facility at Shimoni. The proposed mining area includes the district's most fertile land, is home to many fisherfolk and is a major tourist destination. An analysis of the effects of this project on other available opportunities must be thoroughly understood to ascertain the economic and environmental benefits and costs of the mining venture. The proposed compensation rate of $1,000 per acre, for resettlement for example, appears to be grossly inadequate. Compensation should take into account family size and structure family assets and the cost of relocation.