Isotopic and Elemental Variations of Carbon and Nitrogen in a Mangrove Estuary

Variations in elemental and isotopic ratios of suspended particulate matter (SPM) were investigated in the Guayas River Estuary Ecosystem (GREE) that empties into the Gulf of Guayaquil, Ecuador. Detritus in the system was identified on the basis of extremely high carbon:chlorophyll aratios (>1000). This material had mean δ¹³C of −26·4±0·3, δ¹⁵N of +4·8±0·2, and (C:N)_atomicof 14·1±0·9. The isotopic data were comparable to measurements reported for fresh and degrading mangrove leaves, whereas the elemental ratio was comparatively enriched in nitrogen. Isotope measurements of SPM throughout the GREE were more similar to values for riverine material and detritus compared with that for the coastal end-member. Values indicative ofin situproduced algae, sewage and shrimp pond effluent were only found at selected sites. Bacterial bioassays, which were used to document potential sources of dissolved organic matter in the GREE, were isotopically similar to SPM. This correspondence coupled with the relatively low (C:N)_aof SPM could be explained by bacterial immobolization of nitrogen onto detritus. Finally, tidal variations of (C:N)_aand δ¹³C at a brackish mangrove site were similar in magnitude to spatial variations encountered throughout the GREE. Based on these results, the authors caution that care must be taken when samples are taken for food-web studies in these systems.     

The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.     

Launching and joining of a product carrier of 30,500 DWT built in two sections

This paper describes the process of launching and joining of two sections of a product carrier of 30,500 DWT built at Dianca shipyard at Puerto Cabello, Venezuela. The specifications and characteristics of this ship are in line with the market requirements. This paper deals with the problems encountered during the decision of dividing the ship in two halves, use of syncrolift for launching and subsequent joining of two halves in the dry dock.     

Growth Aspects and Magnesium Carbonate Concentrations of the Reef Building Octocoral Heliopora coerulea (Pallas) after Transplantation

Abstract. An experiment to test C have's hypothesis on temperature dependent MgCO₃ concentrations in marine calcareous skeletons was undertaken by transplanting colonies of Heliopora coerulea. The corals were transferred from a shallow lagoon with high average temperatures to the outer bottom of a fringing reef, 16 m depth, with low average temperatures. Against expectation, a statistically significant increase of average mol % concentrations from 0.48 to 0.54 % for upper growth regions and from 0.49 to 0.62% for lower growth regions was obtained. Temperature records during the experimentation period and the above data indicate that the mol% MgCO₃ concentration in the skeleton of living Heliopora colonies increases when transplanted to an environment with a lower temperature average than that of their original growth site, and with seasonal temperature fluctuations which are smaller in the experimental site than in the control site. Temperature fluctuations at the control site were up to 2.5 times greater than at the experimental site for most of the observation months. This supports the conclusion that the parameters a) minimum temperature and b) temperature stability of the environment are essential for the incorporation of Mg into the carbonate skeleton matrix of marine organisms. Within this study the results of a quantitative chemical analysis of the carbonate skeleton of H. coerulea are presented and growth data of transplanted colonies compared with those from the control site.     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Measurement of water particle velocities in waves

Water surface profiles and horizontal and vertical water particle velocity components have been measured to investigate the properties of intermediate depth waves generated in the laboratory. The data has been compared with linear wave theory. It was found that linear theory predicted the attenuation of velocity field with depth successfully and that it overestimates both components of velocity slightly.     

Long term prediction of non-linear vertical bending moments on a fast monohull

An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.