Precursory signals associated with the 2010 M8.8 Bio-Bio earthquake (Chile) and the 2010 M7.2 Baja California earthquake (Mexico)

Recently, new theories on underground geophysical and geochemical interactions which had been reported to occur during the preparation stages of earthquakes and the remotely measurable variations have been put to test and some warning factors were suggested as earthquake precursors. Data vendors are providing daily basis information from the earth's surface by combining remote sensing data and in situ observations. In this paper, we analyze atmospheric, oceanic, and surface changes in the ocean, coast, and land lying near the epicenters of two recent major earthquakes. The changes are studied in terms of the regional fault locations which have been reported by the U.S. Geological Survey as the shake triggering geological structures. Our detailed analyses showed anomalous increases of surface latent heat flux (SLHF) for both the earthquakes. Meaningfully limited to the geographical extents of the regional active faults, the SLHF variation patterns suggest pre-seismic activity 2–3 weeks before the main events. The agreement of these variations with abnormalities in other climatic and surface factors like relative humidity and temperature represents an unusual situation during the same period as well. Spatiotemporal variations of chlorophyll-a was also studied as another earthquake indicator. Abnormal rises in these factors are possibly caused by the formation of micro-cracks, heat production, evaporation, ionization, and upwelling of nutrient-rich water produced by pre-seismic activity prior to the main events.     

Evolution of Çamlık fissure-ridge travertines in the Başkale basin (Van,Eastern Anatolia)

Fissure-ridge travertines (FRTs) are of great importance for the determination and comparison of tectonic deformation in a region. The coeval development of these travertines with active fault zones supplies significant information about regional dynamics in terms of deformation pattern and evolution. In this paper, the characteristics of FRTs of the Ba?kale basin (eastern Turkey) and responsible regional tectonism are discussed for the first time. The Ba?kale basin is located between the Ba?kale Fault Zone (BFZ) characterised by Çaml?k fault and I??kl?–Zirani? fault. It is located between dextral Yüksekova Fault Zone and southern end of dextral Guilato–Siahcheshmeh–Khoy Fault system (Iran). Various morphological features indicating recent activity are exposed along the BFZ, including offsetting rivers, fissure-ridge travertine and fault scarps. The Çaml?k fissure-ridge travertine composing of three different depositions is observed along the eastern edge of the BFZ with approximately parallel orientations. The Çaml?k fissure-ridge travertine has been formed and developed on fault zone related to strike-slip or oblique movements. We explain how kinematic changes of faults can influence the fissure-ridge development.     

Probabilistic seismic hazard assessment for Lake Van basin,Turkey

The seismic hazard for the Lake Van basin is computed using a probabilistic approach, along with the earthquake data from 1907 to present. The spatial distribution of seismic events between the longitudes of 41–45° and the latitudes of 37.5–40°, which encompasses the region, indicates distinct seismic zones. The positions of these zones are well aligned with the known tectonic features such as the Tutak-Çald?ran fault zone, the Özalp fault zone, the Geva? fault zone, the Bitlis fault zone and Karl?ova junction where the North Anatolian fault zone and East Anatolian fault zone meet. These faults are known to have generated major earthquakes which strongly affected cities and towns such as Van, Mu?, Bitlis, Özalp, Muradiye, Çald?ran, Erci?, Adilcevaz, Ahlat, Tatvan, Geva? and Gürp?nar. The recurrence intervals of M _s ≥ 4 earthquakes were evaluated in order to obtain the parameters of the Gutenberg–Richter measurements for seismic zones. More importantly, iso-acceleration maps of the basin were produced with a grid interval of 0.05 degrees. These maps are developed for 100- and 475- year return periods, utilizing the domestic attenuation relationships. A computer program called Sistehan II was utilized to generate these maps.     

Changes in monsoon precipitation patterns over Bangladesh and its teleconnections with global climate

Theoretical and Applied Climatology - Understanding changes in monsoon precipitation patterns is crucial as it determines the occurrence, intensity, and duration of floods and droughts in...     

Effect of foliation orientation on the P- and S-wave velocity anisotropies and dynamic elastic constants of the quartz-micaschists metamorphic rocks,Angouran mine,Iran

Laboratory measurements are required to study geophysical properties of the subsurface because of lacking direct observation of Earth’s crust. In this research, compressional (P) and shear (S) wave velocity measurements have been conducted on cylindrical specimens of Quartz-micaschist cored using rock blocks taken from the zinc and lead Angouran mine, Zanjan, northwest of Iran. Cylindrical rock specimens were prepared from the blocks by coring in 0°, 30°, 45°, 60°, and 90° into the foliation direction. P- and S-wave velocities were measured along the cylindrical specimens with different foliation orientations. Percent variations of the P- and S-wave velocities (Thomsen’s anisotropic parameters ε and γ) and constant dynamic modulus of test results have been determined. Percent variations of the P-wave velocity (ε) increase with an increase of the foliation angle with respect to the propagating waves direction by a parabolic function as it shows P-wave velocity differences up to a maximum value of 50 %. Thomsen’s anisotropic parameter of γ has also the same function with the foliation angle. Meanwhile, foliation orientation has a much greater influence on ε than γ for foliation angle from 45° to 90° as \( \frac{\varepsilon }{\gamma } \) ratio increases with an increase of foliation angle. Values of dynamic elastic modulus (E), Poisson’s ratio (ν), shear modulus (μ), bulk modulus (K), and Lamé’s constant (λ) increase with the increase of foliation angle with the parabolic function. The results show that dynamic elastic modulus, Poisson’s ratio, shear modulus, bulk modulus, and Lamé’s constant have anisotropic behavior in relation with the foliation orientation.     

Development of a New Empirical Relation to Assess P-wave Velocity Anisotropy of Rocks

Geotechnical and Geological Engineering - Several physical parameters and anisotropy related to rock textural arrangements, schistosity and weakness planes such as cracks and joints affect the...     

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in harbor sediments from Sea Lots, Port-of-Spain, Trinidad and Tobago

Concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in nearshore marine surficial sediments from three locations in Trinidad. Sediments were sampled at Sea Lots on the west coast, in south Port-of-Spain Harbor, south of Sea Lots at Caroni Lagoon National Park, and on Trinidad’s east coast at Manzanilla. Total PCB concentrations in Sea Lots sediments ranged from 62 to 601 ng/g (dry weight {dw}), which was higher than at Caroni and Manzanilla, 13 and 8 ng/g dw, respectively. Total OCP concentrations at Sea Lots were ranged from 44.5 to 145 ng/g dw, compared with 13.1 and 23.8 n/g (dw), for Caroni and Manzanilla respectively. The concentrations of PCBs and of some OCPs in sediments from Sea Lots were above the Canadian interim sediment quality guidelines. To date, this data is the first report on the levels of PCBs and other organochlorine compounds from Trinidad and Tobago.     

Metals in sediments and fish from Sea Lots and Point Lisas Harbors, Trinidad and Tobago

Concentrations of heavy metals were determined in nearshore marine sediments and fish tissue from Sea Lots area on the west coast, at Caroni Lagoon National Park, and in the Point Lisas harbor, Trinidad. The most dominant metals found in sediments were Al, Fe and Zn with mean concentrations highest at Sea Lots (Al-39420 μg/g; Fe-45640 μg/g; Zn-245 μg/g), when compared to sediments from Point Lisas (Al-11936 μg/g; Fe-30171 μg/g; Zn-69 μg/g) and Caroni (Al-0400 μg/g; Fe-19000 μg/g; Zn-32 μg/g), High concentration of Cu, Al, Fe and Zn were also detected in fish tissue from Point Lisas and Caroni. Metal concentrations in fish tissue showed significant correlation with sediment metals concentration, which suggests that tissue levels are influenced by sediment concentration. Of the metals, only Zn, Hg and Cu had a bioaccumulation factor (BAF) greater than one, which suggests a high bioaccumulation potential for these metals.     

Characterization of complex fluvial systems using remote sensing of spatial and temporal water level variations in the Amazon,Congo, and Brahmaputra Rivers

The Surface Water and Ocean Topography (SWOT) satellite mission will provide global, space‐based estimates of water elevation, its temporal change, and its spatial slope in fluvial environments, as well as across lakes, reservoirs, wetlands, and floodplains. This paper illustrates the utility of existing remote sensing measurements of water temporal changes and spatial slope to characterize two complex fluvial environments. First, repeat‐pass interferometric SAR measurements from the Japanese Earth Resources Satellite are used to compare and contrast floodplain processes in the Amazon and Congo River basins. Measurements of temporal water level changes over the two areas reveal clearly different hydraulic processes at work. The Amazon is highly interconnected by floodplain channels, resulting in complex flow patterns. In contrast, the Congo does not show similar floodplain channels and the flow patterns are not well defined and have diffuse boundaries. During inundation, the Amazon floodplain often shows sharp hydraulic changes across floodplain channels. The Congo, however, does not show similar sharp changes during either infilling or evacuation. Second, Shuttle Radar Topography Mission measurements of water elevation are used to derive water slope over the braided Brahmaputra river system. In combination with in situ bathymetry measurements, water elevation and slope allow one to calculate discharge estimates within 2.3% accuracy. These two studies illustrate the utility of satellite‐based measurements of water elevation for characterizing complex fluvial environments, and highlight the potential of SWOT measurements for fluvial hydrology. Copyright © 2010 John Wiley & Sons, Ltd.     

Non-parametric seismic hazard analysis in the presence of incomplete data

The distribution of earthquake magnitudes plays a crucial role in the estimation of seismic hazard parameters. Due to the complexity of earthquake magnitude distribution, non-parametric approaches are recommended over classical parametric methods. The main deficiency of the non-parametric approach is the lack of complete magnitude data in almost all cases. This study aims to introduce an imputation procedure for completing earthquake catalog data that will allow the catalog to be used for non-parametric density estimation. Using a Monte Carlo simulation, the efficiency of introduced approach is investigated. This study indicates that when a magnitude catalog is incomplete, the imputation procedure can provide an appropriate tool for seismic hazard assessment. As an illustration, the imputation procedure was applied to estimate earthquake magnitude distribution in Tehran, the capital city of Iran.