Paleoseismic study of the Kamishiro Fault on the northern segment of the Itoigawa–Shizuoka Tectonic Line,Japan

The M_w 6.2 (Mj 6.8) Nagano (Japan) earthquake of 22 November 2014 produced a 9.3-km long surface rupture zone with a thrust-dominated displacement of up to 1.5 m, which duplicated the pre-existing Kamishiro Fault along the Itoigawa–Shizuoka Tectonic Line (ISTL), the plate-boundary between the Eurasian and North American plates, northern Nagano Prefecture, central Japan. To characterize the activity of the seismogenic fault zone, we conducted a paleoseismic study of the Kamishiro Fault. Field investigations and trench excavations revealed that seven morphogenic paleohistorical earthquakes (E2–E8) prior to the 2014 M_w 6.2 Nagano earthquake (E1) have occurred on the Kamishiro Fault during the last ca. 6000 years. Three of these events (E2–E4) are well constrained and correspond to historical earthquakes occurring in the last ca. 1200 years. This suggests an average recurrence interval of ca. 300–400 years on the seismogenic fault of the 2014 Kamishiro earthquake in the past 1200 years. The most recent event prior to the 2014 earthquakes (E1) is E2 and the penultimate and antepenultimate faulting events are E3 and E4, respectively. The penultimate faulting event (E3) occurred during the period of AD 1800–1400 and is associated with the 1791 M_w 6.8 earthquake. The antepenultimate faulting event (E4) is inferred to have occurred during the period of ca. AD 1000–700, likely corresponding to the AD 841 M_w 6.5 earthquake. The oldest faulting event (E8) in the study area is thought to have occurred during the period of ca. 5600–6000 years. The throw rate during the early Holocene is estimated to be 1.2–3.3 mm/a (average, 2.2 mm/a) with an average amount of characteristic offset of 0.7–1.1 m produced by individual event. When compared with active intraplate faults on Honshu Island, Japan, these slip rates and recurrence interval estimated for morphogenic earthquakes on the Kamishiro Fault along the ISTL appear high and short, respectively. This indicates that present activity on this fault is closely related to seismic faulting along the plate boundary between the Eurasian and North American plates.     

Surf zone fishes in an exposed sandy beach at Sanrimatsubara,Japan: Does fish assemblage structure differ among microhabitats?

To assess differences in fish assemblage structures among microhabitats within the surf zone of an exposed sandy beach, three microhabitats (onshore current, rip current, and river adjacent sites) were sampled at Sanrimatsubara Beach, western Japan, in May, August, and November 2002 and 2003. Although several physical variables (e.g. wave height, current speed, turbidity, salinity, and sand particle size) and major prey abundances (calanoid copepods and mysids) differed among the sites, no significant differences were apparent in the numbers of fish species and individuals among the sites in any month in either year. In addition, species and individual numbers of two dominant feeding groups (zooplankton feeders, and epiphytic and benthic crustacean feeders) did not show any significant responses to among-site differences in prey abundance. Cluster and ordination analysis confirmed the similarity in fish species composition among the three sites. These results indicated that the surf zone fish assemblage structures were similar among the microhabitats in spite of there being microhabitat-related differences in abiotic and biotic environments.     

Thermochronology of the PoSen complex,northern Vietnam: Implications for tectonic evolution in SE Asia

The PoSen complex, located closely adjacent to the southwestern margin of the Red River shear zone represents the uplifted basement of north Vietnam and may record the motion of the shear zone. However, its thermochronological history has not been fully examined yet. Here we applied U–Pb and ⁴⁰Ar/³⁹Ar dating methods to reveal its thermochronological history. U–Pb analysis of composite zircon grains by TIMS yielded an average age of 760 ± 25 Ma, clustering on the concordia line. Twelve SHRIMP U–Pb analyses also yielded a consistent result of 751 ± 7 Ma. Along with the geochemical features, the U–Pb dating results suggest the PoSen complex was a late Proterozoic magmatic complex, which could correspond to the Chengjiang orogeny, a widespread thermal event in southwest China. Results of ⁴⁰Ar/³⁹Ar dating of micas and K-feldspars were in the range of 36–30 Ma, revealing a rapid cooling and exhumation history of the PoSen complex during the late Paleogene. The time span of cooling and exhumation of the PoSen complex is slightly older than the main cooling phases of the Ailao Shan–Red River (ASRR) metamorphic massifs (28–17 Ma), but is synchronous with the early igneous activity stage in the eastern Indo-Asian collision zone of southeast China and north Vietnam. Owing to the ongoing debate about the initiation and offset of the ASRR shear zone, the tectonic force for the late Paleogene cooling of the PoSen complex is still inconclusive. The rapid exhumation of the PoSen complex could be in response to either the detachment of the Neo-Tethyan slab or a transpressional phase of continental subduction along the ASRR shear system in the eastern Indo-Asian collision zone.     

Petrogenesis of lunar meteorite EET 96008

Lunar meteorite EET 96008 is a fragmental breccia that predominantly consists of basaltic mineral clasts (0.5-2 mm), along with minor lithic fragments and breccia clasts. The matrix consists mainly of smaller mineral fragments (<0.5 mm), bound by glassy cement, the majority of which are pyroxene and plagioclase. The pyroxene possesses extensive exsolution lamellae. These lamellae, up to 1 μm in width, are atypical for mare-basalts. One of the distinguishing textures of EET 96008 is the presence of small pockets (∼400 × 500 μm) of mesostasis areas consisting of coarse (∼20 μm) intergrowths of ferroaugite, fayalite and Si-rich glass. Laths of ilmenite, armalcolite, apatite and whitlockite are also distributed in these areas. Ilmenite grains are abundant and dispersed throughout the thin sections. Chromite and ulvöspinel are present but in minor abundance. Troilite, generally rare in this rock, occurs as several grains in one pyroxene crystal. FeNi metal is conspicuously absent from this meteorite.The molar Fe/Mn ratio in olivines and pyroxenes and the age of the meteorite are evidence for a lunar origin. The mineralogy of EET 96008 shows close affinity to a mare-basalt source, albeit with possible minor highland/non-mare components. The bulk-rock, major-, trace- and rare-earth-element (REE) contents are similar to that of very low-titanium (VLT) basalts, which have experienced extreme fractional crystallization to the point of silicate liquid immiscibility. Mineralogical and textural features of this sample suggest that at least some of the breccia components were derived from a slow-cooled magma. The mineralogy and petrology of EET 96008 is strikingly similar to the lunar meteorite EET 87521, and we support the conclusion that EET 96008 and EET 87521 should be paired.Isochron ages of 3530 ± 270 Ma for apatite and 3519 ± 100 Ma for whitlockite of this rock are consistent with derivation from a mare-basalt precursor. These ages are within error of the low-Ti basalts, dated from the Apollo 12 and 15 sites. The whole-rock, platinum-group-element (PGE) contents of EET 96008 overlap with pristine low-Ti mare basalts, suggesting the presence of only a minimal extraterrestrial component.     

Impacts of different diffusion scenarios for mitigation technology options and of model representations regarding renewables intermittency on evaluations of CO2 emissions reductions

This paper evaluated the impacts of climate change mitigation technology options on CO₂ emission reductions and the effects of model representations regarding renewable intermittency on the assessment of reduction by using a world energy systems model. First, different diffusion scenarios for carbon dioxide capture and storage (CCS), nuclear power, and wind power and solar PV are selected from EMF27 scenarios to analyze their impacts on CO₂ emission reductions. These technologies are important for reducing CO₂ intensity of electricity, and the impacts of their diffusion levels on mitigation costs are significant, according to the analyses. Availability of CCS in particular, among the three kinds of technologies, has a large impact on the marginal CO₂ abatement cost. In order to analyze effects of model representations regarding renewables intermittency, four different representations are assumed within the model. A simplistic model representation that does not take into consideration the intermittency of wind power and solar PV evaluates larger contributions of the energy sources than those evaluated by a model representation that takes intermittency into consideration. Appropriate consideration of renewables intermittency within global energy systems models will be important for realistic evaluations of climate change mitigation scenarios.     

Seawater temperature proxies based on DSr, DMg, and DU from culture experiments using the branching coral Porites cylindrica

In order to investigate the incorporation of Sr, Mg, and U into coral skeletons and its temperature dependency, we performed a culture experiment in which specimens of the branching coral (Porites cylindrica) were grown for 1 month at three seawater temperatures (22, 26, and 30 °C). The results of this study showed that the linear extension rate of P. cylindrica has little effect on the skeletal Sr/Ca, Mg/Ca, and U/Ca ratios. The following temperature equations were derived: Sr/Ca (mmol/mol) = 10.214(±0.229) − 0.0642(±0.00897) × T (°C) (r² = 0.59, p < 0.05); Mg/Ca (mmol/mol) = 1.973(±0.302) + 0.1002(±0.0118) × T (°C) (r² = 0.67, p < 0.05); and U/Ca (μmol/mol) = 1.488(±0.0484) − 0.0212(±0.00189) × T (°C) (r² = 0.78, p < 0.05). We calculated the distribution coefficient (D) of Sr, Mg, and U relative to seawater temperature and compared the results with previous data from massive Porites corals. The seawater temperature proxies based on D calibrations of P. cylindrica established in this study are generally similar to those for massive Porites corals, despite a difference in the slope of D_U calibration. The calibration sensitivity of D_Sr, D_Mg, and D_U to seawater temperature change during the experiment was 0.64%/°C, 1.93%/°C, and 1.97%/°C, respectively. These results suggest that the skeletal Sr/Ca ratio (and possibly the Mg/Ca and/or U/Ca ratio) of the branching coral P. cylindrica can be used as a potential paleothermometer.     

Quantitative micro‐X‐ray fluorescence scanning spectroscopy of wet sediment based on the X‐ray absorption and emission theories: Its application to freshwater lake sedimentary sequences

Micro‐X‐ray fluorescence scanning spectroscopy of marine and lake sedimentary sequences can provide detailed palaeoenvironmental records through element intensity proxy data. However, problems with the effects of interstitial pore water on the micro‐X‐ray fluorescence intensities have been pointed out. This is because the X‐ray fluorescence intensities are measured directly at the surfaces of split wet sediment core samples. This study developed a new method for correcting X‐ray fluorescence data to compensate for the effects of pore water using a scanning X‐ray analytical microscope. This involved simultaneous use of micro‐X‐ray fluorescence scanning spectroscopy and an X‐ray transmission detector. To evaluate the interstitial pore water content from the X‐ray transmission intensities, a fine‐grained sediment core retrieved from Lake Baikal (VER99‐G12) was used to prepare resin‐embedded samples with smooth surfaces and uniform thickness. Simple linear regression between the linear absorption coefficients of the samples and their porosity, based on the Lambert–Beer law, enabled calculation of the interstitial pore spaces and their resin content with high reproducibility. The X‐ray fluorescence intensities of resin‐embedded samples were reduced compared with those of dry sediment samples because of: (i) the X‐ray fluorescence absorption of resin within sediment; and (ii) the sediment dilution effects by resin. An improved micro‐X‐ray fluorescence correction equation based on X‐ray fluorescence emission theory considers the instrument's sensitivity to each element, which provides a reasonable explanation of these two effects. The resin‐corrected X‐ray fluorescence intensity was then successfully converted to elemental concentrations using simple linear regression between the data from micro‐X‐ray fluorescence scanning spectroscopy and from the conventional analyzer. In particular, the calculated concentration of SiO₂ over the depth of the core, reflecting diatom/biogenic silica concentration, was significantly changed by the calibrations, from a progressively decreasing trend to an increasing trend towards the top of the core.     

A new algorithm to retrieve aerosol over the gulf of cambay in India

Ocean color analysis and aerosol retrieval in coastal regions are made difficult by water turbidity. An algorithm has been proposed which uses the data at a blue wavelength instead of those in near-infrared wavelengths for the aerosol retrieval. The quasi-homogeneous effects are assumed for the correction of water leaving radiance with soil particles at 0.412 μm. The proposed algorithm is examined using SeaWiFS data on December 24, 2000 around India. Over the coastal waters, extremely large values of optical thickness are extracted from the operational SeaWiFS algorithm, whereas our proposed algorithm produces a smooth transition in values of optical thickness from the turbid waters to the surrounding regions.     

Internal structures and U–Pb ages of zircons from a tuff layer in the Meishucunian formation, Yunnan Province, South China

The Precambrian/Cambrian (PC/C) boundary is one of the most important intervals for the evolution of life, represented by prominent biological evolution from the first appearance of soft-bodied animals from the late Neoproterozoic to the sudden diversification of animals with mineralized skeletons in the Cambrian. In South China several areas contain many fossils and are well exposed, suitable for the investigation of PC/C boundary. However, geochronological relationships are still poorly known because of lack of combined detailed investigations of internal structures of zircons and in-situ U–Pb dating.We focus on the internal structure of zircons from a tuff layer within Bed 5 in the Meishucun section on which we undertook cathodoluminescence (CL) imaging and in-situ U–Pb dating with LA-ICP-MS and nano-SIMS. Over 600 zircons from the tuff layer were classified into three types based on their CL images: oscillatory rims, inherited cores and dull structures. U–Pb dating of the internal structure of the zircons by LA-ICP-MS clearly shows a distinct unimodal age population dependent on the structure: 531 ± 17 Ma for the oscillatory rims and 515 Ma for the dull structures. The clear oscillatory zonation, the prismatic morphology, and their occurrence indicate that the oscillatory rims were formed from felsic magmatism, and that the U–Pb nano-SIMS age of 536.5 ± 2.5 Ma records the depositional age of the tuff. Our results indicate that the PC/C boundary is situated below Bed 5, and therefore the bottom of Zone 1 (Marker A) is more appropriate for the PC/C boundary than is the top of Zone 1 (Marker B). The age of a positive anomaly (P2) in the early Cambrian is estimated to be ca. 536 Ma.     

Evaluation of global warming impacts for different levels of stabilization as a step toward determination of the long-term stabilization target

In order to estimate the benefit attributable to alleviating global warming for a kind of cost–benefit analysis of global warming mitigation, global warming impacts were quantitatively evaluated for a pathway of unmitigated CO₂ emissions and three pathways to stabilize the atmospheric CO₂ concentration at different levels, keeping unchanged the assumed conditions on population and GDP growths, although the GDP losses which will be caused due to the warming mitigation for the three stabilization pathways are taken into account. The evaluation results show that global warming will reduce the world total number of deaths caused by thermal stress owing to the large decrease in the cold-related deaths; it will increase the water stress in some regions, while it will decrease the stress in other regions; reductions in CO₂ emissions will decrease the probability of THC collapse and terrestrial biodiversity loss; and it will enhance an increase in the wheat production potential.