Coordinated Ocean-ice Reference Experiments (COREs)

Coordinated Ocean-ice Reference Experiments (COREs) are presented as a tool to explore the behaviour of global ocean-ice models under forcing from a common atmospheric dataset. We highlight issues arising when designing coupled global ocean and sea ice experiments, such as difficulties formulating a consistent forcing methodology and experimental protocol. Particular focus is given to the hydrological forcing, the details of which are key to realizing simulations with stable meridional overturning circulations.The atmospheric forcing from [Large, W., Yeager, S., 2004. Diurnal to decadal global forcing for ocean and sea-ice models: the data sets and flux climatologies. NCAR Technical Note: NCAR/TN-460+STR. CGD Division of the National Center for Atmospheric Research] was developed for coupled-ocean and sea ice models. We found it to be suitable for our purposes, even though its evaluation originally focussed more on the ocean than on the sea-ice. Simulations with this atmospheric forcing are presented from seven global ocean-ice models using the CORE-I design (repeating annual cycle of atmospheric forcing for 500 years). These simulations test the hypothesis that global ocean-ice models run under the same atmospheric state produce qualitatively similar simulations. The validity of this hypothesis is shown to depend on the chosen diagnostic. The CORE simulations provide feedback to the fidelity of the atmospheric forcing and model configuration, with identification of biases promoting avenues for forcing dataset and/or model development.     

Adsorption of oxalate and malonate at the water-goethite interface: Molecular surface speciation from IR spectroscopy

The adsorption of oxalate and malonate at the water-goethite interface was studied as a function of pH and total ligand concentrations by means of quantitative adsorption measurements and attenuated total reflectance Fourier transform infrared spectroscopy. The obtained results conclusively showed that oxalate and malonate both form outer-sphere and inner-sphere surface complexes on goethite, and that these complexes coexist over a broad pH interval. The inner-sphere complexes were favored by low pH, while the relative concentrations of the outer-sphere species increase with increasing pH. Based on comparisons with model complexes characterized by Extended X-Ray Adsorption Fine Structure (EXAFS) and results from theoretical frequency calculations, the structures of the inner-sphere complexes of oxalate and malonate were best described as mononuclear five- and six-membered ring chelate structures, respectively. The stability of the inner-sphere complexes followed the trend expected from solutions studies, with the oxalate five-membered ring yielding the more stable complexes compared to the six-membered ring of malonate. The increased stability of the inner-sphere complex of oxalate was manifested in a greater extent of adsorption at acidic pH values. Despite the fact that significant amounts of oxalate and malonate inner-sphere surface complexes were formed, no ligand-promoted dissolution was observed at the experimental conditions in the study.     

A Bayesian hierarchical spatio-temporal model for significant wave height in the North Atlantic

Bad weather and rough seas continue to be a major cause for ship losses and is thus a significant contributor to the risk to maritime transportation. This stresses the importance of taking severe sea state conditions adequately into account in ship design and operation. Hence, there is a need for appropriate stochastic models describing the variability of sea states, taking into account long-term trends related to climate change. Various stochastic models of significant wave height are reported in the literature, but most are based on point measurements without considering spatial variations. As far as the authors are aware, no model of significant wave height to date exploits the flexible framework of Bayesian hierarchical space-time models. This framework allows modelling of complex dependence structures in space and time and incorporation of physical features and prior knowledge, yet at the same time remains intuitive and easily interpreted. This paper presents a Bayesian hierarchical space-time model for significant wave height. The model has been fitted by significant wave height data for an area in the North Atlantic ocean. The different components of the model will be outlined, and the results from applying the model to monthly and daily data will be discussed. Different model alternatives have been tried and long-term trends in the data have been identified for all model alternatives. Overall, these trends are in reasonable agreement and also agree fairly well with previous studies. Furthermore, a discussion of possible extensions to the model, e.g. incorporating regression terms with relevant meteorological data will be presented.     

Semantic Enablement for Spatial Data Infrastructures

Building on abstract reference models, the Open Geospatial Consortium (OGC) has established standards for storing, discovering, and processing geographical information. These standards act as a basis for the implementation of specific services and Spatial Data Infrastructures (SDI). Research on geo‐semantics plays an increasing role to support complex queries and retrieval across heterogeneous information sources, as well as for service orchestration, semantic translation, and on‐the‐fly integration. So far, this research targets individual solutions or focuses on the Semantic Web, leaving the integration into SDI aside. What is missing is a shared and transparent Semantic Enablement Layer for SDI which also integrates reasoning services known from the Semantic Web. Instead of developing new semantically enabled services from scratch, we propose to create profiles of existing services that implement a transparent mapping between the OGC and the Semantic Web world. Finally, we point out how to combine SDI with linked data.     

Chronology and extent of the Lofoten–Vesterålen sector of the Scandinavian Ice Sheet from 26 to 16 cal. ka BP

The interplay between the onshore and offshore areas during the Last Glacial Maximum and the deglaciation of the Scandinavian Ice Sheet is poorly known. In this paper we present new results on the glacial morphology, stratigraphy and chronology of Andøya, and the glacial morphology of the nearby continental shelf off Lofoten–Vesterålen. The results were used to develop a new model for the timing and extent of the Scandinavian Ice Sheet in the study area during the local last glacial maximum (LLGM) (26 to 16 cal. ka BP). We subdivided the LLGM in this area into five glacial events: before 24, c. 23 to 22.2, 22.2 to c. 18.6, 18 to 17.5, and 16.9–16.3 cal. ka BP. The extent of the Scandinavian Ice Sheet during these various events was reconstructed for the shelf areas off Lofoten, Vesterålen and Troms. Icecaps survived in coastal areas of Vesterålen–Lofoten after the shelf was deglaciated and off Andøya ice flowed landwards from the shelf. During the LLGM the relative sea level was stable until 18.5 cal. ka BP, and thereafter there was a sea‐level drop on Andøya. Thus, relative sea level (i.e. a sea level rise) does not seem to be a driving mechanism for ice‐margin retreat in this area but the fall in sea level may have had some importance for the grounding episodes on the banks during deglaciation. The positions of the grounding zone wedges (GZWs) in the troughs are related to the morphology as they are often located where the troughs narrow.     

A geochronological framework for orogenic gold mineralisation in central Victoria, Australia

New ⁴⁰Ar/³⁹Ar geochronological data support, and significantly expand upon, preliminary age data that were interpreted to suggest an episodic and diachronous emplacement of gold across the western Lachlan fold belt, Australia. These geochronological data indicate that mineralisation in the central Victorian gold province occurred in response to episodic, eastward progressing deformation, metamorphism and exhumation associated with the formation of the western Lachlan fold belt. Initial gold formation throughout the Stawell and the Bendigo structural zones can be constrained to a broad interval of time between 455 and 435 Ma, with remobilisation of metals into new structures and/or new pulses of mineralisation occurring between 420 and 400 Ma, and again between 380 and 370 Ma, linked to episodic variations in the regional stress-field and during intrusion of felsic dykes and plutons. This separation of ages is incompatible with the view that gold emplacement in the western Lachlan fold belt was the result of a single, orogen-wide event during the Devonian. A distinct phase of gold mineralisation, characterised by elevated Cu, Mo, Sb or W, is associated with both Late Silurian to Early Devonian (~420 to 400 Ma) and Middle to Late Devonian (~380 to 370 Ma) magmatism, when crustal thickening and shortening during the ongoing consolidation of the western Lachlan Fold Belt led to extensive melt development in the lower crust and resulted in widespread magmatism throughout central Victoria. These ~420 to 400 Ma and ~380 to 370 Ma occurrences, best exemplified by the Wonga deposit in the Stawell structural zone and many of the Woods Point deposits in the Melbourne structural zone, but also evidenced by occurrences at Fosterville and Maldon in the Bendigo structural zone, clearly formed synchronous with, or post-date, the emplacement of plutons and dykes, and thus are spatially (if not genetically) related to melt generation at depth. This later, magmatic-associated and polymetallic type of gold mineralisation is economically subordinate to the earlier, metamorphic-associated type of gold deposition in the Stawell and Bendigo structural zones, but tends to be the dominant style in the Melbourne Zone. These new geochronological constraints, together with zircon U-Pb data from felsic intrusive rocks of known relationship to gold mineralisation, demonstrate that initial hydrothermal alteration associated with gold emplacement in the western Lachlan fold belt was metamorphic-related, predating the emplacement of granite plutons by as much as 80 million years. This timing differs from other important orogenic gold districts where gold deposition is closely associated spatially with felsic magmatism. The early introduction of metamorphically derived fluids well before magmatism may reflect variations in the timing of peak metamorphic conditions at different crustal levels in an accretionary prism undergoing simultaneous deformation and erosion. Consequently, no genetic link exists between the main phase(s) of gold mineralisation and magmatism in the central Victorian gold province. With the exception of formation of a minor magmatism-related and geochemically-distinct mineralisation style at about 420 to 400 Ma, and again at about 380 to 370 Ma, the apparent spatial relationship between gold mineralisation and felsic intrusions is merely the result of melts and fluids being channelised along the same structures.     

Pb---Nd---Sr isotopic constraints on the origin of the Caledonian Bindal Batholith, central Norway

The Bindal Batholith is the largest granitoid batholith in the Scandinavian Caledonides, emplaced prior to or during the Scandian collision in a complex scenario of Ordovician to Middle Silurian nappe assembly. The Bindal Batholith ranges in compositon from mafic gabbro to leucogranite, but granites and granodiorites are by far the most abundant rock types.

Pb---Pb, Sm---Nd and Rb---Sr isotopic results from plutons of the batholith constrain the origin of the Bindal Batholith magmas. The isotope results suggest the presence of several source reservoirs, giving rise to the granitoid magmas. Both a source relatively depleted in U, Th and Rb and enriched in Sm, a source enriched in U and Rb and depleted in Sm, a source enriched in Th and Rb, but depleted in Sm, and, finally, a source enriched in Th and Sm, but depleted in Rb, is indicated by the initial compositions of the radiogenic isotope ratios. It is suggested that the depleted source reservoirs were contemporaneous depleted mantle and mantle derived rocks in the nappe sequences, that the enriched source reservoir was sediments derived from Proterozoic upper crust of Baltic Shield affinity and that the Th-enriched source reservoir was various Proterozoic rocks, in a lower crustal position, of either Baltic or Laurentian affinity.     

Generation of multi-resolution maps from run-length-encoded data

Abstract

One motivation for the need of maps to be organized hierarchically in different resolutions is the fact that in most applications low-resolution maps require less heavy computations than maps represented at higher resolutions. Spatial data structures that permit generation of lower levels or resolution in a hierarchical fashion already exist, e.g., quad-trees and resolution pyramids. Many other spatial data structures that are non-hierarchical, and therefore do not permit the generation of resolution hierarchies, also exist. One such structure is the run-length-code (RLC), which has many powerful advantages that make the structure feasible in geographical information systems. In this article an approach to the problem of generating a resolution hierarchy from RLC is described and discussed.