Electrodialytic remediation of CCA-treated waste wood in pilot scale

When chromated copper arsenate (CCA)-treated wood is removed from service and turns into waste, the contents of Cu, Cr and As remain high due to the strong fixation of CCA in the wood. This high content of toxic compounds presents a disposal challenge. Incineration of CCA-treated waste wood is not allowed in Denmark; instead, the wood is to be land-filled until new methods for handling the wood are available. Since the amounts of CCA-treated wood being removed from service is expected to increase in the years to come, the need for finding alternative handling methods is very relevant. In this study, the usefulness of Electrodialytic Remediation was demonstrated for handling of CCA-treated waste wood in pilot scale. The electrodialytic remediation method, which uses a low-level direct current (DC) as the cleaning agent, combines electrokinetic movement of ions in the wood matrix with the principles of electrodialysis. It has previously been shown that it is possible to remove Cu, Cr and As from CCA-treated wood using electrodialytic remediation in laboratory scale, but until now, the method had not been studied in large scale. The pilot-scale plant used in this study was designed to contain up to 2 m³ wood chips. Six remediation experiments were carried out. In these experiments, the process was up-scaled stepwise by increasing the distance between the electrodes from initially 60 cm to finally 150 cm. The remediation time was varied between 11 and 21 days, and phosphoric acid and/or oxalic acid was used to facilitate the desorption of CCA from the wood. In the most successful of the experiments carried out, the concentration of CCA in the wood was reduced by up to 82% for Cr, 88% for Cu and at least 96% for As.     

The lower marine to lower freshwater Molasse transition in the northern Alpine foreland basin (Oligocene; central Switzerland–south Germany): age and geodynamic implications

The Wilhelmine Alpe section near Immenstadt (Allgäu, south Germany), which represents one of the best continuously exposed outcrops within the northern Alpine foreland basin, has been analyzed for magnetostratigraphic and palynostratigraphic signals. The section comprises the marine-to-terrestrial transition from Lower Marine (UMM) to Lower Freshwater Molasse (USM) sediments. Based on the correlation of the local magnetic pattern with the geomagnetic polarity timescale (GPTS) and palynostratigraphic data, an age of about 31 Ma is suggested for the UMM–USM transition in the Wilhelmine Alpe section. A comparison with coeval magnetostratigraphic sections from central and eastern Switzerland indicates that the regression of the UMM sea along the southern margin of the Molasse basin occurred strongly heterochronously between 31.5 and 30 Ma. The heterochroneity is attributed to the deposition of fan-delta and alluvial fan sediments which document that the overall marine conditions during the UMM were accompanied by strong clastic input derived from the rising Alps. This clastic contribution had a much stronger influence on the depositional pattern than previously thought.     

GPS monitoring of vertical ground motion in northern Ardenne–Eifel: five campaigns (1999–2003) of the HARD project

We present the HARD project of GPS monitoring of vertical ground motion in NE Ardenne and Eifel (western Europe). Its main purposes are to get a better insight into the present-day rates of vertical ground motion in intraplate settings and to identify the various causes of these motions. Since 1999, we have carried out yearly campaigns of simultaneous GPS measurements at 12 sites situated so as to sample the different tectonic subunits of the study area and especially to record potential displacements across the seismogenic Hockai fault zone. Five campaigns (1999–2003) have been processed currently. Key issues of the data processing with the Gamit software are discussed and first results are presented. Though temporally consistent in many cases, the obtained vertical motion rates are spatially highly variable. They are also much too high (several mm/year) to support a tectonic interpretation, and a long-term influence of groundwater level variations is proposed to account for the observed motions. This influence should be distinguished from seasonal variations and from inter-survey variations linked to the varying degree of soil and subsoil drying off during the successive spring surveys.     

Zircon M127 – A Homogeneous Reference Material for SIMS U–Pb Geochronology Combined with Hafnium,Oxygen and,Potentially, Lithium Isotope Analysis

In this article, we document a detailed analytical characterisation of zircon M127, a homogeneous 12.7 carat gemstone from Ratnapura, Sri Lanka. Zircon M127 has TIMS‐determined mean U–Pb radiogenic isotopic ratios of 0.084743 ± 0.000027 for ²⁰⁶Pb/²³⁸U and 0.67676 ± 0.00023 for ²⁰⁷Pb/²³⁵U (weighted means, 2s uncertainties). Its ²⁰⁶Pb/²³⁸U age of 524.36 ± 0.16 Ma (95% confidence uncertainty) is concordant within the uncertainties of decay constants. The δ¹⁸O value (determined by laser fluorination) is 8.26 ± 0.06‰ VSMOW (2s), and the mean ¹⁷⁶Hf/¹⁷⁷Hf ratio (determined by solution ICP‐MS) is 0.282396 ± 0.000004 (2s). The SIMS‐determined δ⁷Li value is ?0.6 ± 0.9‰ (2s), with a mean mass fraction of 1.0 ± 0.1 μg g^?1 Li (2s). Zircon M127 contains ~ 923 μg g^?1 U. The moderate degree of radiation damage corresponds well with the time‐integrated self‐irradiation dose of 1.82 × 10¹⁸ alpha events per gram. This observation, and the (U–Th)/He age of 426 ± 7 Ma (2s), which is typical of unheated Sri Lankan zircon, enable us to exclude any thermal treatment. Zircon M127 is proposed as a reference material for the determination of zircon U–Pb ages by means of SIMS in combination with hafnium and stable isotope (oxygen and potentially also lithium) determination.     

Using sewage sludge as a sealing layer to remediate sulphidic mine tailings: a pilot-scale experiment, northern Sweden

At the Kristineberg mine, northern Sweden, sulphidic mine tailings were remediated in an 8-year pilot-scale experiment using sewage sludge to evaluate its applicability as a sealing layer in a composite dry cover. Sediment, leachate water, and pore gas geochemistry were collected in the aim of determining if the sludge was an effective barrier material to mitigate acid rock drainage (ARD) formation. The sludge was an effective barrier to oxygen influx as it formed both a physical obstruction and functioned as an organic reactive barrier to prevent oxygen to the underlying tailings. Sulphide oxidation and consequential ARD formation did not occur. Sludge-borne trace elements accumulated in a reductive, alkaline environment in the underlying tailings, resulting in an effluent drainage geochemistry of Cd, Cu, Pb and Zn below 10 μg/L, high alkalinity (810 mg/L) and low sulphate (38 mg/L). In contrast, the uncovered reference tailings received a 0.35-m deep oxidation front and typical ARD, with dissolved concentrations of Cd, Zn and sulphate, 20.8 μg/L, 16,100 μg/L and 1,390 mg/L, respectively. Organic matter degradation in the sludge may be a limiting factor to the function of the sealing layer over time as 85 % loss of the organic fraction occurred over the 8-year experimental period due to aerobic and anaerobic degradation. Though the cover may function in the short to medium term (100 years), it is unlikely to meet the demands of a long-term remedial solution.     

Ionic conductivity in gem-quality single-crystal alkali feldspar from the Eifel: temperature,orientation and composition dependence

We measured the ion conductivity of single-crystal alkali feldspar originating from two different locations in the Eifel/Germany, named Volkesfeld and Rockeskyller sanidine and having potassium site fractions \(C_\mathrm{K}\) of 0.83 and 0.71, respectively. The dc conductivities resulting from electrochemical impedance spectroscopy over the temperature range of 300–900 \(^{\circ }\hbox {C}\) show a weak composition dependence but pronounced differences between the b-direction [\(\perp (010)\)] and \(c^{*}\)-direction [\(\perp (001)\)] of the monoclinic feldspar structure. Conductivity activation energies obtained from the observed linear Arrhenius plots are close to 1.2 eV in all cases, which is closely similar to the activation energies of the \(^{22}\mathrm{Na}\) tracer diffusivity in the same crystals. Taking into account literature data on K tracer diffusion and diffusion correlation effects, the present results point to a predominance of the interstitialcy mechanism over the vacancy mechanism in mass and charge transport on the alkali sublattice in potassium-rich alkali feldspar.     

Thermal conductivity measurements of road construction materials in frozen and unfrozen state

A series of thermal conductivity measurements for various materials was performed in a large climate chamber. The size of the chamber allowed the preparation of relatively large samples in a controlled thermal environment. Three types of thermal sensors were used: (1) two needle probes; (2) a grid of temperature sensors, evenly distributed inside the sample; (3) two additional thermal probes, which were simplified versions of an instrument originally developed for measuring thermal properties of the ice/dust mixture expected to exist at the surface of a comet nucleus. They consist of a series of individual temperature sensors integrated into a glass fibre rod. Each of these sensors can be operated in an active (heated) or passive (only temperature sensing) mode. The following sample materials were used: fine-grained reddish sand, coarse-grained moist sand, gravels with various grain size distributions from < 1 cm up to about 6 cm, and for comparison and calibration pure water (with convection suppressed by adding agar-agar), compact ice, and compact granite. Of particular interest are the measurements with composite samples, like stones embedded in an agar-agar matrix. We describe the evaluation methods and present the results of the thermal conductivity measurements.     

利用多波段分光仪观测生物有效UV辐射、臭氧总量和云的影响

该文介绍了一种利用紫外分光仪进行辐照度观测获取生物有效UV辐射、臭氧总量和云的光学厚度的方法。这些量是观测的辐照度与辐射传输计算相结合后测定的。该方法被用于具有 4个中心波长为 30 5、32 0、340和 380nm ,宽度为 10nm的 4波段分光仪。将这种仪器与高精度分光光度计在美国圣迭戈不同天气条件下进行了为期 1周的对比观测。当太阳天顶角 (SZA) <80°时 ,CIE 权重UV辐射剂量率的相对误差为 1.4± 3.2 %。晴天条件下 ,当SZA <80°时 ,相对误差为 0 .6± 1.5%。该仪器观测的辐照度推算的臭氧总量对云并不敏感。这种仪器还与Dobson和Brewer仪器在挪威奥斯陆进行了一年多的对比观测。整个观测期间 (包括有云的情况 )获得的臭氧总量相对误差为 0 .3± 2 .9%。当晴天和SZA <6 0°时 ,标准差减小到 1.9%。将仪器观测中所获得的臭氧总量和云的光学厚度输入到辐射传输模式 ,可以计算从 2 90～ 4 0 0nm分辨率为 1nm的整个光谱。这样计算的光谱与同时用高精度分光光度计观测的光谱在晴天及有云的条件下非常一致 ,所以 ,这种光谱可以用于测定任何作用光谱的辐射剂量率。而计算这种光谱只需要一个UV B通道和一个UV A通道     

Future ocean uptake of CO2: interaction between ocean circulation and biology

We discuss the potential variations of the biological pump that can be expected from a change in the oceanic circulation in the ongoing global warming. The biogeochemical model is based on the assumption of a perfect stoichiometric composition (Redfield ratios) of organic material. Upwelling nutrients are transformed into organic particles that sink to the deep ocean according to observed profiles. The physical circulation model is driven by the warming pattern as derived from scenario computations of a fully coupled ocean-atmosphere model. The amplitude of the warming is determined from the varying concentration of atmospheric CO₂. The model predicts a pronounced weakening of the thermohaline overturning. This is connected with a reduction of the transient uptake capacity of the ocean. It yields also a more effective removal of organic material from the surface which partly compensates the physical effects of solubility. Both effects are rather marginal for the evolution of atmospheric pCO₂. Running climate models and carbon cycle models separately seems to be justified. Received: 9 August 1995 / Accepted: 22 April 1996