Monitoring gravel augmentation in a large regulated river and implications for process‐based restoration

The artificial gravel augmentation of river channels is increasingly being used to mitigate the adverse effects of river regulation and sediment starvation. A systematic framework for designing and assessing such gravel augmentations is still lacking, notably on large rivers. Monitoring is required to quantify the movement of augmented gravel, measure bedform changes, assess potential habitat enhancement, and reduce the uncertainty in sediment management. Here we present the results of an experiment conducted in the Rhine River (French and German border). In 2010, 23 000 m³ of sediments (approximately the mean annual bedload transport capacity) were supplied in a by‐passed reach downstream of the Kembs dam to test the feasibility of enhancing sediment transport and bedform changes. A 620‐m‐long and 12‐m‐wide gravel deposit was created 8 km downstream from the dam. Monitoring included topo‐bathymetric surveys, radio‐frequency particle tracking using passive integrated transponder (PIT) tags, bed grain size measurement, and airborne imagery. Six surveys performed since 2009 have been described (before and after gravel augmentation, and after Q₂ and Q₁₅ floods). The key findings are that (i) the augmented gravel was partially dispersed by the first flood event of December 2010 (Q₁); (ii) PIT tags were found up to 3200 m downstream of the gravel augmentation site after four years, but the effects of gravel augmentation could not be clearly distinguished from the effects of floods and internal remobilization on more than 3500 m downstream; (iii) linear and log‐linear relationships linking bedload transport, particle mobility, and grain size were established; and (iv) combined bathymetry and PIT tag surveys were useful for evaluating potential environmental risks and the first morpho‐ecological responses. This confirmed the complementary nature of such techniques in the monitoring of gravel augmentation in large rivers. Copyright © 2017 John Wiley & Sons, Ltd.     

Is a regional flood signal reproducible from lake sediments?

The evolution of flood activity with global warming remains uncertain. To better assess flood–climate relationships, lake sediments are increasingly being investigated because they could provide regional flood histories long enough to cover past climate changes. However, site‐specific sedimentary processes may bias flood reconstructions. The aim of this article is to investigate these effects through the reconstruction of two distinct flood records from independent, neighbouring sedimentary basins of the same lake (Lake Allos in the Mediterranean French Alps), i.e. under the same climate conditions. Understanding of sedimentary processes is crucial in order to adapt the sampling strategy and the flood‐intensity proxy to each sedimentary system and, thereby, reconstruct a complete and reliable flood history. Thanks to this detailed approach, the main trends of the regional flood variability can be reproduced; i.e. periods of high flood‐frequency, ranges of flood‐frequency values and timing of the most intense events. In detail, some differences appeared associated to the various stream capacities to erode and transport flood sediments to the lake system, implying variable sensitivity of sedimentary systems in recording floods. Comparing regional flood records based on independent sedimentary systems from similar environments could thus be a complementary approach to assessing past flood intensity. Such an approach could open particularly interesting perspectives because reconstructing the long‐term evolution of flood intensity is a key challenge in the geosciences.     

Buoyancy-driven perturbations in a rapidly rotating,electrically conducting fluid: part II – dynamo action

The helicity, electromotive force and α-effect produced in a homogeneous, rapidly rotating, electrically conducting fluid by an isolated source of buoyancy at small Elsasser number are calculated, visualized and analyzed. Due to physical symmetries of the system, the integrals of helicity and electromotive force over all space are zero. However, each has a significant non-zero value when integrated over the cross section of the Taylor column. The local α-effect is found to be significantly anisotropic; it is strongest when the applied magnetic field is toroidal and the resulting EMF is parallel to the applied field.     

Vertical profiling of SO2 and SO above Venus’ clouds by SPICAV/SOIR solar occultations

New measurements of sulfur dioxide (SO₂) and monoxide (SO) in the atmosphere of Venus by SPICAV/SOIR instrument onboard Venus Express orbiter provide ample statistics to study the behavior of these gases above Venus’ clouds. The instrument (a set of three spectrometers) is capable to sound atmospheric structure above the clouds in several observation modes (nadir, solar and stellar occultations) either in the UV or in the near IR spectral ranges. We present the results from solar occultations in the absorption ranges of SO₂ (190–230 nm, and at 4 μm) and SO (190–230 nm). The dioxide was detected by the SOIR spectrometer at the altitudes of 65–80 km in the IR and by the SPICAV spectrometer at 85–105 km in the UV. The monoxide’s absorption was measured only by SPICAV at 85–105 km. We analyzed 39 sessions of solar occultation, where boresights of both spectrometers are oriented identically, to provide complete vertical profiling of SO₂ of the Venus’ mesosphere (65–105 km). Here we report the first firm detection and measurements of two SO₂ layers. In the lower layer SO₂ mixing ratio is within 0.02–0.5 ppmv. The upper layer, also conceivable from microwave measurements by Sandor et al. (Sandor, B.J., Todd Clancy, R., Moriarty-Schieven, G., Mills, F.P. [2010]. Icarus 208, 49–60) is characterized by SO₂ increasing with the altitude from 0.05 to 2 ppmv, and the [SO₂]/[SO] ratio varying from 1 to 5. The presence of the high-altitude SO_x species could be explained by H₂SO₄ photodissociation under somewhat warmer temperature conditions in Venus mesosphere. At 90–100 km the content of the sulfur dioxide correlates with temperature increasing from 0.1 ppmv at 165–170 K to 0.5–1 ppmv at 190–192 K. It supports the hypothesis of SO₂ production by the evaporation of H₂SO₄ from droplets and its subsequent photolysis at around 100 km.     

Linking landscape morphological complexity and sediment connectivity

Connectivity relates to the coupling of landforms (e.g. hillslopes and channels) and the transfer of water and sediment between them. The degree to which parts of a catchment are connected depends largely on the morphological complexity of the catchment's landscape. Landscapes can have very different and distinct morphologies, such as terraces, V‐shaped valleys or broad floodplains. The objective of this study is to better understand and quantify the relation between landscape complexity and catchment connectivity. We hypothesize that connectivity decreases with increasing landscape morphological complexity. To quantify the connectivity–complexity relationship virtual digital elevation models (DEMs) with distinct morphologies were used as inputs into the landscape evolution model LAPSUS to simulate the sediment connectivity of each landscape. Additionally, the hypothesis was tested on six common real DEMs with widely different morphologies. Finally, the effects of different rainfall time series on catchment response were explored. Simulation results confirm the hypothesis and quantify the non‐linear relation. Results from the exploration of sediment connectivity in response to sequences of rainfall events indicate that feedback between erosion and deposition are more important for certain landscape morphologies than for others: for a given rainfall input, a more effective sediment connectivity and erosion response may be expected from rolling or V‐shaped catchments than from dissected or stepped landscapes. Awareness of the differences in the behaviour and response of different morphologies to catchment processes provides valuable information for the effective management of landscapes and ecosystems through efficiently designed soil and water conservation measures. Copyright © 2013 John Wiley & Sons, Ltd.     

Long-core profiles of137Cs,134Cs,60Co and210Pb in sediment near the Rhône River (Northwestern Mediterranean Sea)

Various anthropogenic radionuclides and²¹⁰Pb were analyzed in a 4.3-m-long core, sampled near the Rhône River mouth in March 1991, to evaluate the extent of industrial releases that accumulate in this area. The whole core was significantly marked by radionuclide inputs from the nuclear facilities located along the river (¹³⁷Cs,¹³⁴Cs,⁶⁰Co). Irregular profiles in natural and artificial radionuclides should be related to variations in their respective inputs from the Rhône River to the Mediterranean Sea. Minimum concentrations were found during high flow periods. Using both the¹³⁷Cs/¹³⁴Cs profile in the core and the range of this ratio in Rhône waters, mean apparent accumulation rates were estimated to range between 37 cm yr^?1 and 48 cm yr^?1. This core would then represent a sedimentary record over a 7–10 year period. However, the presence of a signal from the Chernobyl accident, which occurred on April 26, 1986, was not clearly observed in the core. Inventories of both artificial and natural radionuclides were greater than expected from atmospheric inputs. The increased sedimentation occurring in close vicinity to the mouth of the Rhône River is thus responsible for trapping of elements transported by the river to the Mediterranean Sea. In this area, inventories of artificial radionuclides are well in excess of aerial deposition from Chernobyl and atmospheric weapons tests and are linked primarily to industrial releases.     

A Mössbauer and FTIR study of synthetic amphiboles along the magnesioriebeckite – ferri-clinoholmquistite join

A series of amphiboles along the magnesioriebeckite—Na₂Mg₃Fe³⁺ ₂Si₈O₂₂(OH)₂– ferri-clinoholmquistite—Li₂Mg₃Fe³⁺ ₂Si₈O₂₂(OH)2 - join, defined by the ^BLi^B Na_–1 exchange vector, were hydrothermally synthesized at 700°C, 0.4 GPa, NNO + 1 redox conditions. Powder XRD and SEM-EDAX showed a very high (> 90%) amphibole yield for all samples. X-ray patterns were indexed in the C2/m space group; refined cell-parameters show a linear decrease of a and as a function of chemistry. IR spectra in the OH-stretching region show four main and rather sharp bands; these are assigned to Mg and Fe²⁺ at M(1,3), and indicate that the obtained amphiboles depart from the nominal octahedral composition (^M1,3Mg₃). The IR spectra also show that there is an increasing filling-up of the A-site for increasing Na in the system (increasing solid-solution toward, arfvedsonite). Mössbauer spectra show four well-defined quadrupole doublets which are assigned to Fe³⁺ at M2 and to Fe²⁺ at M1, M3 and M4, respectively. The Fe³⁺/Fe²⁺ content derived from fitted peak areas show variable Fe³⁺ concentration along the series. Mössbauer spectra also show a distinct alteration of ⁵⁷Fe hyperfine parameters with changing Na–Li at M4. The most evident variation is observed for the quadrupole splitting of Fe³⁺ at M2, which increases by 50% from ferri-clinoholmquistite to magnesio-riebeckite; this suggest that the M2 octahedron in ferri-clinoholmquistite is much closer to the ideal geometry than the M2 octahedron in magnesio-riebeckite. Mössbauer spectra show also a well-defined increase in the Fe²⁺ quadrupole splitting of the M1 and M3 octahedra, which is attributed to the Na–Li distribution at the B-sites.     

Broken Beds,but better science; using multiple hypotheses to interpret geological data

In this study, we propose a multiple hypotheses approach to improve interpretations of limited remotely sensed datasets, such as sparsely exposed outcrops, subsurface datasets, or planetary objects using semi-quantitative scoring and ranking of observable features. This method is demonstrated using an outcrop example from the Broken Beds of the Upper Jurassic–Lower Cretaceous Purbeck Limestone Group exposed along Britain's Jurassic Coast. Four published hypotheses regarding their origin are refined, represented in matrix form, scored and ranked based on carefully selected outcrop features. Semi-quantitative scoring utilises knowledge of likely processes governing the occurrence of a range of features, some of which might be ignored or down-played to favour a single hypothesis. Furthermore, by integrating expertise from different sub-disciplines (e.g. basin analysis, sedimentology, diagenesis), we also consider the combined evidence of multiple features. This new method results in an interpretation that favours a multi-process origin for the Broken Beds due to evaporite dissolution, overpressure release and tectonic folding, with identified uncertainty, all useful to guide further data collection.     

Modelling sediment dynamics due to hillslope–river interactions: incorporating fluvial behaviour in landscape evolution model LAPSUS

Landscape evolution models (LEMs) simulate the three‐dimensional development of landscapes over time. Different LEMs have different foci, e.g. erosional behaviour, river dynamics, the fluvial domain, hillslopes or a combination. LEM LAPSUS is a relatively simple cellular model operating on timescales of centuries to millennia and using annual timesteps that has had a hillslope focus. Our objective was to incorporate fluvial behaviour in LAPSUS without changing the existing model equations. The model should be able to reproduce alternating aggradation and incision in the floodplains of catchments, depending on simulated conditions. Testing was done using an artificial digital elevation model (DEM) and a demonstration of the ability for fluvial simulation was performed for a real landscape (Torrealvilla catchment, southeast Spain). Model equations to calculate sediment dynamics and water routing were similar for both hillslope and fluvial conditions, but different parameter values were used for these domains, defined based on annual discharge. Parameters changing between the domains are convergence factor p, which is used in the multiple flow algorithm to route water, and discharge and gradient exponents m and n, used in transport capacity calculations. Erodibility and ‘sedimentability’ factors K and P were changed between cold (little vegetation, high erodibility) and warm conditions (more vegetation, lower erodibility). Results show that the adapted parameters reproduced alternating aggradation – due to divergent flow in the floodplain and sediment supply under cold conditions – and incision due to reduced sediment supply and resulting clean water erosion during simulated warm conditions. The simulated results are due to interactions between hillslopes and floodplains, as the former provide the sediments that are deposited in the latter. Similar behaviour was demonstrated when using the real DEM. Sensitivity and resolution analysis showed that the model is sensitive to changes in m, n and p and that model behaviour is influenced by DEM resolution. Copyright © 2012 John Wiley & Sons, Ltd.     

LMDZ5B: the atmospheric component of the IPSL climate model with revisited parameterizations for clouds and convection

Based on a decade of research on cloud processes, a new version of the LMDZ atmospheric general circulation model has been developed that corresponds to a complete recasting of the parameterization of turbulence, convection and clouds. This LMDZ5B version includes a mass-flux representation of the thermal plumes or rolls of the convective boundary layer, coupled to a bi-Gaussian statistical cloud scheme, as well as a parameterization of the cold pools generated below cumulonimbus by re-evaporation of convective precipitation. The triggering and closure of deep convection are now controlled by lifting processes in the sub-cloud layer. An available lifting energy and lifting power are provided both by the thermal plumes and by the spread of cold pools. The individual parameterizations were carefully validated against the results of explicit high resolution simulations. Here we present the work done to go from those new concepts and developments to a full 3D atmospheric model, used in particular for climate change projections with the IPSL-CM5B coupled model. Based on a series of sensitivity experiments, we document the differences with the previous LMDZ5A version distinguishing the role of parameterization changes from that of model tuning. Improvements found previously in single-column simulations of case studies are confirmed in the 3D model: (1) the convective boundary layer and cumulus clouds are better represented and (2) the diurnal cycle of convective rainfall over continents is delayed by several hours, solving a longstanding problem in climate modeling. The variability of tropical rainfall is also larger in LMDZ5B at intraseasonal time-scales. Significant biases of the LMDZ5A model however remain, or are even sometimes amplified. The paper emphasizes the importance of parameterization improvements and model tuning in the frame of climate change studies as well as the new paradigm that represents the improvement of 3D climate models under the control of single-column case studies simulations.