Integrated Onshore‐Offshore Investigation of a Mediterranean Layered Coastal Aquifer

Most of the Mediterranean coastal porous aquifers are intensively exploited. Because of climatic and anthropogenic effects, understanding the physical and geological controls on groundwater distribution and flow dynamics in such aquifers is crucial. This study presents the results of a structural investigation of a system located along the coastline of the Gulf of Lions (NW Mediterranean). A key aspect of this study relies on an onshore‐offshore integrated approach combining outcrops, seismic profiles, and borehole data analysis. This multidisciplinary approach provides constraints on pore‐fluid salinity distribution and stratigraphic organization, which are crucial in assessing the modes of groundwater/seawater exchanges. Onshore, Lower Pliocene deposits dip gently seaward. They are unconformably overlain by Holocene clays in the lagoons. Offshore the Pliocene deposits either outcrop at the seabed or are buried below nonconsolidated sands infilling paleo‐valleys. Beneath the lido, the groundwater salinity distribution consists of salty pore water, overlying fresher pore water. Active circulation of groundwater masses is inferred from the geophysical results. In particular, offshore outcrops and paleo‐valleys may play an important role in salt water intrusion.     

Origin and evolution of fluids from mud volcanoes in the Barbados accretionary complex

A large collection of fluids (54 interstitial fluids and four expelled fluids) were sampled at the Manon site, at the outer edge of the Barbados accretionary complex. These warm fluids (up to 20°C) are expelled by sub-marine (5000 mbsl) mud volcanoes consisting of diapirs (unchanneled flow) and diatremes (channeled).Chlorine stable isotope ratios of these fluids were measured by IRMS with a reproducibility of ± 0.05‰ (1σ) versus SMOC (Standard Mean Ocean Chloride).A large range of δ³⁷Cl between −5.3‰ and +0.1‰ is observed. Data from each volcanic structure describe a mixing between seawater and a low-δ³⁷Cl fluid. The whole set of data is interpreted as the result of a mixing between two deep components and seawater. The two deep fluids are chemically distinct (e.g., in Ca, Mg, K, Li, Sr and Br contents and Br/Cl ratio). They display low and significantly different ⁸⁷Sr/⁸⁶Sr ratios (0.707790 and 0.707892, respectively) and δ³⁷Cl values (−4.51 and −5.24‰, respectively).Physicochemical processes such as mineralogical transformation, diffusion, compaction or ion filtration are known to fractionate chlorine stable isotopes and can produce fluids with negative δ³⁷Cl values. Ion filtration due to sediment compaction appears to be the more likely process to explain the negative δ³⁷Cl values observed at the Manon site. A model for the generation of these signatures is proposed where a residual negative δ³⁷Cl fluid reservoir is created at the bottom of the prism or the sediment pile. Further compaction/fracturing and/or dewatering of the slab may flush out these fluids and focus them towards the décollement zone. Mixing between the fluids and ultimately with seawater and water released during gas hydrate destabilizations may explain the data set within the individual cores and between the different structures.     

The grain-size characterisation of coastal sand from the Somme estuary to Belgium: Sediment sorting processes and mixing in a tide- and storm-dominated setting

Sand-rich Holocene to modern clastic deposits in the eastern English Channel and the southern North Sea coasts of France and Belgium occur extensively as nearshore-sand bank, estuarine-tidal flat, aeolian dune and beach sub-environments. Sand samples (n = 665) collected from these deposits suggest the presence of three different populations: a largely dominant (83%) medium to fine quartz sand population (“b”), and finer- (14%) and coarser-grained (4%) populations (respectively “c” and “a”). The distribution of these populations among the four sub-environments reflects tide- and storm-dominated sorting and transport processes and a variable degree of mixing. These populations are derived from a mixture of very fine- to very coarse-grained fluvial, outwash and paraglacial sediments deposited on the beds of the eastern English Channel and southern North Sea during the late Pleistocene lowstand. The nearshore-sand bank environment, which also corresponds to the main offshore source area of the coastal deposits, exhibits population heterogeneity reflecting the variability of hydrodynamic conditions and sediment sorting in this zone. The nearshore topography of tidal ridges, banks and troughs in these tidal seas leads to variable bed and tide- and storm-induced shear stress conditions. These conditions only allow for the mobilisation and onshore transport of some of the finer fractions (populations “b” and “c”), leaving an offshore mixture of these finer populations with coarser, less mobilisable sediments (population “a”). Once in the coastal zone, these two finer populations undergo further hydrodynamic sorting and segregation. Variably sorted very fine sands to silts (population “c”) are trapped in the low-energy estuarine-tidal flat sub-environment, while the highly homogeneous population “b” is further sorted in aeolian dune and beach sub-environments. This sorting occurs via a coastal sand transport pathway linking the Somme estuary mouth to the southern North Sea bight where tidal range and wave energy decrease relative to the English Channel. Since this sand transport pathway enables longshore transport of hydrodynamically sorted medium to fine sand derived directly from the immediate nearshore zone, it has further contributed to a net flux of this sand population from the eastern English Channel sea bed to the southern North Sea.     

Lake‐level fluctuations at Lake Bourget (eastern France) around 4500–3500 cal. a BP and their palaeoclimatic and archaeological implications

On the basis of sedimentological analysis of two cores taken at Chatillon, Lake Le Bourget (northern French Pre‐Alps), and well dated by radiocarbon dates in addition to tree ring dates obtained from an archaeological layer, this paper presents a high‐resolution lake‐level record for the period 4500–3500 cal. a BP. The collected data provide evidence of a complex palaeohydrological (climatic) oscillation spanning the ca. 4300–3850 cal. BP time interval, with major lake‐level maxima at ca. 4200 and 4050–3850 cal. a BP separated by a lowering episode around 4100 cal. a BP. The lake‐level highstands observed at Chatillon between 4300 and 3850 cal. BP appear to be synchronous with (i) a major flooding period recorded in deep cores from the large lakes Le Bourget and Bodensee, and (ii) glacier advance and tree line decline in the Alps. Such wetter and cooler climatic conditions in west‐central Europe around 4000 cal. a BP may have been a nonlinear response to decrease and seasonal changes in insolation. They may also provide a possible explanation for the general abandonment of prehistoric lake dwellings north of the Alps between 4360 and 3750 cal. a BP. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis with C- and X-band satellite SAR data of the Portalet landslide area

This paper describes the use of the Stable Point Network technique, a Persistent Scatterer Interferometry SAR technique, for the analysis of the Portalet landslide area (Central Pyrenees, Spain). For this purpose, different SAR datasets acquired by ERS-1, ERS-2, ENVISAT and TerraSAR-X satellites have been analysed. The use of different SAR images acquired by satellite radar sensors operating at different microwave lengths has allowed for a comparative assessment and illustration of the advantages and disadvantages of these satellites for landslide detection and monitoring. In the introduction, differential interferometry and the study area are briefly described. Then the specifics of the SPN processing and the results of the different datasets are described and compared. In Analysis of the results: the Portalet landslide area, the Portalet landslide area is introduced and the radar displacement measurements are analysed with available geo-information data. Additionally, X-band measurements are compared with those gathered by a ground-based SAR for a previous project. Finally, the most relevant conclusions of this work are discussed.     

Pollution au plomb dans la Savoie antique (II–IIIe s. apr. J.-C.) en relation avec une installation métallurgique de la cité de Vienne

In Lake Anterne (NW French Alps), the Roman period is characterised by a lead contamination more important than that of the 1970s, due to the use of leaded gasoline. The maximum of this contamination period has been varve-dated 220 AD, i.e., during the optimum of Roman civilization in the Alps. Crossing palaeoenvironmental and archaeological evidences points out the economic importance of the town of Passy for the City of Vienne and yields a new example of lead contamination due to local metallurgical activity rather than distant impact of the exploitation of the Spanish Rio Tinto mine. To cite this article: F. Arnaud et al., C. R. Geoscience 338 (2005).     

The trace element compositions of S-type granites: evidence for disequilibrium melting and accessory phase entrainment in the source

Within individual plutons, the trace element concentrations in S-type granites generally increase with maficity (total iron and magnesium content and expressed as atomic Fe + Mg in this study); the degree of variability in trace element concentration also expands markedly with the same parameter. The strongly peraluminous, high-level S-type granites of the Peninsular Pluton (Cape Granite Suite, South Africa) are the product of biotite incongruent melting of a metasedimentary source near the base of the crust. Leucogranites within the suite represent close to pure melts from the anatectic source and more mafic varieties represent mixtures of melt and peritectic garnet and ilmenite. Trace elements such as Rb, Ba, Sr and Eu, that are concentrated in reactant minerals in the melting process, show considerable scatter within the granites. This is interpreted to reflect compositional variation in the source. In contrast, elements such as LREE, Zr and Hf, which are concentrated within refractory accessory phases (zircon and monazite), show well-defined negative correlations with increasing SiO₂ and increase linearly with increasing maficity. This is interpreted to reflect coupled co-entrainment of accessory minerals and peritectic phases to the melt: leucocratic rocks cannot have evolved from the more mafic compositions in the suite by a process of fractional crystallisation because in this case they would have inherited the zircon-saturated character of this hypothetical earlier magma. Trace element behaviour of granites from the Peninsular Pluton has been modelled via both equilibrium and disequilibrium trace element melting. In the disequilibrium case, melts are modelled as leaving the source with variable proportions of entrained peritectic phases and accessory minerals, but before the melt has dissolved any accessory minerals. Thus, the trace element signature of the melt is largely inherited from the reactants in the melting reaction, with no contribution from zircon and monazite dissolution. In the equilibrium case, melt leaves the source with entrained crystals, after reaching zircon and monazite saturation. A significant proportion of the rocks of the Peninsular Pluton have trace element concentrations below those predicted by zircon and monazite saturation. In the case of the most leucocratic rocks all compositions are zircon undersaturated; whilst the majority of the most mafic compositions are zircon oversaturated. However, in both cases, zircon is commonly xenocrystic. Thus, the leucocratic rocks represent close to pure melts, which escaped their sources rapidly enough that some very closely match the trace element disequilibrium melting model applied in this study. Zircon dissolution rates allow the residency time for the melt in the source to be conservatively estimated at less than 500 years.     

Hydropyrolysis of algae, bacteria, archaea and lake sediments; insights into the origin of nitrogen compounds in petroleum

Nitrogen compounds are ubiquitous in fossil fuels and yet our understanding of their origins in the geosphere is limited. In this study, high hydrogen pressure pyrolysis was performed on sample material representing potential contributors to sedimentary organic matter (algae, bacteria and archaea) and sediments representing early diagenetic accumulations from Lake Pollen (Norway) and Priest Pot (UK). Previous workers demonstrated the structurally conservative nature of high hydrogen pressure pyrolysis in that the technique maximizes the yields of covalently bound hydrocarbon biomarkers from organic matter without adversely affecting their stereochemistry (Love et al., 1995). Release of covalently bound biomarkers in high yields from kerogen via catalytic hydropyrolysis. In this study, the types and distributions of organic nitrogen compounds in the hydropyrolysates were characterised under similar conditions to such experiments where biomarker hydrocarbons undergo minimal rearrangement. Compounds identified by gas chromatography–mass spectrometry included alkyl-substituted indoles, carbazoles, benzocarbazoles, quinolines and benzoquinolines.Indoles are present in all hydropyrolysates, suggesting a common origin. A potential source of indoles is represented by tryptophan which was shown to degrade through a series of alkylated intermediates to indole. Carbazole, quinoline and benzoquinoline were also found in the hydropyrolysates of algae, bacteria and archaea. The presence of these petroleum-related nitrogen compounds in hydropyrolysates generated from biomass suggests an early origin for petroleum nitrogen compounds. A potential source of naturally occurring nitrogen compounds such as that in the alkaloids has yet to be realised.Benzocarbazoles were absent from hydropyrolysates of algae, bacteria and archeae, but present in those from recent sediments, suggesting their presence may be related to processes occurring during early diagenesis at, or immediately below, the sediment–water interface. In sediments from Lake Pollen, changes in the benzocarbazole ratio [a]/([a] + [c]) ratio coincides with the interval described as a transition from fjord to lake environment, suggesting that benzocarbazoles are sensitive to changes in depositional environment and may have potential to act as a marker for environmental conditions.     

La sismicité en corse: Revue historique et etude macrosismique de quelques evénéments récents

Résumé L'étude des documents (archives, presse et catalogues sismiques) que nous avons consultés, nous a permis de remonter jusqu'à la fin du XVIIIe siècle dans l'histoire sismologique corse. Le nombre des séismes ressentis (épicentres en mer ou sur l'île) recensés pendant ces deux siècles et demi est relativement faible. Les intensités maximales ont parfois atteint le degré VI, plus rarement VII. L'activité sismique touche principalement une région située au Nord-Est de la Corse, au voisinage de failles au rejeu récènt et séparent le domaine de la Corse schisteuse (alpin) du domaine de la Plaine Orientale (Quaternaire, Néogène). Une crise sismique récente (1978–1979) a de nouveau secoué cette même région où on a suggéré l'activité actuelle de certaines de ces failles. Les plus importants de ces séismes (I _max=VI et V) ontifait l'objet d'enquêtes macrosismiques qui permettent d'en préciser les épicentres. Deux d'entre-eux ont été étudiés en détail (3 avril 1978 et 27 mars 1979); en utilisant la relation de Kövesligethy, les hypocentres se situent respectivement à 4,5±0.5 km et vers 5 km, pour des coefficients d'absorption de 0,020 et 0,031. Ces profondeurs indiquent que ces deux séismes ont mis en jeu des éléments superficiels de la croûte corse (30 km).

---

The documents that we have compiled (archives, newspaper reports and seismic catalogues) enabled us to go back to the end of the 18th century in the seismic history of Corsica. The number of felt earthquakes (epicentres off shore or on the island) which were documented during the two and a half centuries is relatively low. Maximum intensities have reached VI or rarely VII. The seismic activity is mainly located in the North-East of Corsica, near faults which have recently been active between the Corse schisteuse (Alpine domain) and the Plaine Orientale (Quaternary, Neogene). A seismic crisis happened recently (1978–1979) in this area where present activity of some of these faults has been suggested. Macroseismic studies have been conducted for the main shocks (I _max=VI and V) in order to locate them accurately. Two among them (April 3, 1978 and March 27, 1979) are studied here in detail. Using the Kövesligethy formula hypocenters are respectively found at 4.5±0.5 km and around 5 km, whereas the corresponding absorption factors are 0.020 and 0.031. Such depths show that the two events affected the upper crust of Corsica (30 km).

Contribution n^o 321 de l'Institut de Géophysique, Ecole Polytechnique Fédérale de Zürich.