Comparative assessment of the relationship of satellite data with the above ground biomass of Sal trees (<Emphasis Type="Italic">Shorea robusta</Emphasis>) determined from phenologically different time periods

The Above Ground Biomass(AGB) estimates of vegetation comprise both the bole biomass determined through a volumetric equation and litter biomass collected from the ground.For mature trees,the AGB estimated in phenologically different time periods is directly affected by the litter biomass since the Diameter at Breast Height(DBH) and height(H) of such trees that are used in the estimation of bole biomass would remain unchanged over a reasonable time period.In the present study,we have determined the AGB of Sal trees(Shorea robusta) in two contrasting seasons:the peak green period in October being devoid of lit-ter on the ground and the leaf shedding period in February with abundant amount of litter present on the ground.Estimation of AGB for the month of February included the litter biomass.In contrast,the AGB for October represented only the bole biomass.AGB was estimated for ten different plots selected in the study area.The AGB estimated from ten sampling plots for each time period was re-gressed with the individual tree parameters such as the average DBH and height of trees measured from the corresponding plots.The regression analysis exhibited a significantly stronger relationship between the AGB and DBH for the month of October as compared to February.Furthermore,the correlation between the remotely sensed derived data and AGB was also found to be significantly higher for the month of October than February.This observation indicates that inclusion of the litter biomass in AGB will tend to decrease the re-gression relationship between AGB and DBH and also between the remotely sensed data and AGB.Therefore,these conclusions invite careful consideration while estimating AGB from satellite data in phenologically different time periods.     

Late Carboniferous porphyry copper mineralization at La Voluntad,Neuquén,Argentina: Constraints from Re–Os molybdenite dating

The La Voluntad porphyry Cu–Mo deposit in Neuquén, Argentina, is one of several poorly known porphyry-type deposits of Paleozoic to Early Jurassic age in the central and southern Andes. Mineralization at La Voluntad is related to a tonalite porphyry from the Chachil Plutonic Complex that intruded metasedimentary units of the Piedra Santa Complex. Five new Re–Os molybdenite ages from four samples representing three different vein types (i.e., quartz–molybdenite, quartz–sericite–molybdenite and quartz–sericite–molybdenite ± chalcopyrite–pyrite) are identical within error and were formed between ~312 to ~316 Ma. Rhenium and Os concentrations range between 34 to 183 ppm and 112 to 599 ppb, respectively. The new Re–Os ages indicate that the main mineralization event at La Voluntad, associated to sericitic alteration, was emplaced during a time span of 1.7 ± 3.2 Ma and that the deposit is Carboniferous in age, not Permian as previously thought. La Voluntad is the oldest porphyry copper deposit so far recognized in the Andes and indicates the presence of an active magmatic arc, with associated porphyry style mineralization, at the proto-Pacific margin of Gondwana during the Early Pennsylvanian.     

Observations of estuarine circulation and solitary internal waves in a highly energetic tidal channel

Despite vigorous tidal and wind mixing, observations in an estuarine tidal inlet in the Wadden Sea show that during part of the tidal cycle, vertical stratification and internal waves may still develop. Acoustic Doppler current profiler (ADCP) and conductivity, temperature, depth observations, collected over the past 6 years at 13 h anchor stations (ASs), reveal that these occur especially during slack tide, when there is little wind and large freshwater discharge from nearby Lake IJssel. Measurements with a moored ADCP show that in the same tidal phase, strong cross-channel circulation develops, which may suddenly reverse circulation sense due to passing density fronts. In the vertically stratified phase that follows after the front passage, propagating mode-one solitary internal waves are observed. These are resonantly generated during decelerating tidal ebb currents when the (shear) flow passes a transcritical regime (Froude number equal to 1). A combination of photographs (including one from the International Space Station), bathymetric data, and ASs data leads to the discovery of yet another source of internal waves in this area, produced during slackening tide by propagating lee waves that develop over a deep trench. We suggest that both the cross-channel circulation as well as the (solitary) internal waves may locally be of importance for the (re)distribution and transport of sediments and nutrients and may influence tidally averaged transports.     

An Improved Approach for Parameterizing Surface-Layer Turbulent Transfer Coefficients in Numerical Models

Based on classic iterative computation results, new equations to calculate the surface turbulent transfer coefficients are proposed, which allow for large ratios of the momentum and heat roughness lengths. Compared to the Launiainen scheme, our proposed scheme generates results closer to classical iterative computations. Under unstable stratification, the relative error in the Launiainen scheme increases linearly with increasing instability, even exceeding 15%, while the relative error of the present scheme is always less than 8.5%. Under stable stratification, the Launiainen scheme uses two equations, one for 0 < Ri _B ≤ 0.08 and another for 0.08 < Ri _B ≤ 0.2, and does not consider the condition that Ri _B > 0.2, while its relative errors in the region 0 < Ri _B ≤ 0.2 exceed 31 and 24% for momentum and heat transfer coefficients, respectively. In contrast, the present scheme uses only one equation for 0 < Ri _B ≤ 0.2 and another equation for Ri _B > 0.2, and the relative error of the present scheme is always less than 14%.     

Well placement optimization subject to realistic field development constraints

This work considers the well placement problem in reservoir management and field development optimization. In particular, it emphasizes embedding realistic and practical constraints into a mathematical optimization formulation. Such constraints are a prerequisite for the wider use of mathematical optimization techniques in well placement problems, since constraints are a way to incorporate reservoir engineering knowledge into the problem formulation. There are important design limitations that are used by the field development team when treating the well placement problem, and these limitations need to be articulated and eventually formalized within the problem before conducting the search for optimal well placements. In addition, these design limitations may be explicit or implicit. In this work, various design limitations pertaining to well locations have been developed in close collaboration with a field operator on the Norwegian Continental Shelf. Moreover, this work focuses on developing constraint-handling capability to enforce these various considerations during optimization. In particular, the Particle Swarm Optimization (PSO) algorithm is applied to optimize for the well locations, and various practical well placement constraints are incorporated into the PSO algorithm using two different constraint-handling techniques: a decoder procedure and the penalty method. The decoder procedure maps the feasible search space onto a cube and has the advantage of not requiring parameter tuning. The penalty method converts the constrained optimization problem into an unconstrained one by introducing an additional term, which is called a penalty function, to the objective function. In contrast to the penalty method, only feasible solutions are evaluated in the decoder method. Through numerical simulations, a comparison between the penalty method and the decoder technique is performed for two cases. We show that the decoder technique can easily be implemented for the well placement problem, and furthermore, that it performs better than the penalty method in most of the cases.     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.     

The structure of the mid- and high-latitude ionosphere during the November 2004 storm event obtained from GPS observations

GPS data from the International GNSS Service (IGS) network were used to study the development of the severe geomagnetic storm of November 7–12, 2004, in the total electron content (TEC) on a global scale. The TEC maps were produced for analyzing the storm. For producing the maps over European and North American sectors, GPS measurements from more than 100 stations were used. The dense network of GPS stations provided TEC measurements with a high temporal and spatial resolution. To present the temporal and spatial variation of TEC during the storm, differential TEC maps relative to a quiet day (November 6, 2004) were created. The features of geomagnetic storm attributed to the complex development of ionospheric storm depend on latitude, longitude and local time. The positive, as well as negative effects were detected in TEC variations as a consequence of the evolution of the geomagnetic storm. The maximal effect was registered in the subauroral/auroral ionosphere during substorm activity in the evening and night period. The latitudinal profiles obtained from TEC maps for Europe gave rise to the storm-time dynamic of the ionospheric trough, which was detected on November 7 and 9 at latitudes below 50°N. In the report, features of the response of TEC to the storm for European and North American sectors are analyzed.     

Lateral tidal mixing in the Antarctic marginal seas

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.     

The first field-based descriptions of pumping-induced saltwater intrusion and upconing

Development of the ideas about the equilibrium between freshwater and saline water has received considerable attention in the literature, but little has been written so far about the earliest scientific works about well salinization. Based on a review of the literature from the second half of the 19th century and the early 20th century, this historical note explores how insights into groundwater abstraction and saltwater intrusion developed, and examples of the earliest field studies are provided. Fundamental research was driven by the need for increasing water supply, but the progress of science did not lead to sustainable management practices everywhere. Research outcomes were shared between scientists of different countries, marking the beginning of coastal hydrogeology as a scientific specialization in the first decade of the 20th century.     

PLL Tracking Performance in the Presence of Oscillator Phase Noise

The tracking performance of a Phase Lock Loop (PLL) is affected by the influence of several error sources. In addition to thermal noise and dynamic stress error, oscillator phase noise can cause significant phase jitter which degrades the tracking performance. Oscillator phase noise is usually caused by two different effects: Allan deviation phase noise is caused by frequency instabilities of the receiver's reference oscillator and the satellite's frequency standard. It can be termed as system-inherent phase noise and is relevant for both static and dynamic applications. “External” phase noise, however, is caused by vibration and is a major problem for dynamic applications. In the context of this paper, both types of phase noise will be modeled and the resulting integrals will be evaluated for PLLs up to the third order. Besides, phase jitter induced by thermal noise and signal dynamics will also be discussed, thus providing all necessary formulas for analyzing the performance of a phase lock loop in case of different forms of stress. Since the main focus is centered on the effects of oscillator phase noise, the overall PLL performance is graphically illustrated with and without consideration of oscillator phase noise. © 2002 Wiley Periodicals, Inc.