The Pindos Fold-and-thrust belt (Greece): inversion kinematics of a passive continental margin

Continuous exposure in the Pindos mountain chain (Greece) and the detailed stratigraphic measurements in the area enable us to construct eight balanced cross sections across the Pindos Fold-and-thrust belt (PFTB) and to approach quantitatively some parameters which controlled foreland evolution. The 160-km-wide passive continental margin of the Apulian continent in Greece was progressively shortened from east to west at rates of 6 mm/year between the Early Oligocene and Late Eocene. From the rear to the frontal part of the wedge, fault-bend folds, duplexes and imbricates were formed, while strain was partitioned into faulting (~34%), layer parallel shortening (~23%) and buckling (~9%). Foreland subsidence and internal deformation of the orogenic wedge are strongly affected by two parameters of equal importance: the thrust load of the overthrusted microcontinents and the rigidity of the underthrusted Apulian passive margin. Changes in the thickness of the pre-orogenic sediments and reactivated transform faults induced salients. During the Lower Miocene, the orogenic wedge in the Peloponnese suffered additional uplift and westward gravitational gliding induced by the intracontinental subduction of the Palaeozoic rift zone of the Phyllite-Quartzite Series, which was reactivated and returned to the earths surface during the Hellenic orogeny.     

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.     

Intercomparison of multiple statistical downscaling methods: multi-criteria model selection for South Korea

A number of statistical downscaling methodologies have been introduced to bridge the gap in scale between outputs of climate models and climate information needed to assess potential impacts at local and regional scales. Four statistical downscaling methods [bias-correction/spatial disaggregation (BCSD), bias-correction/constructed analogue (BCCA), multivariate adaptive constructed analogs (MACA), and bias-correction/climate imprint (BCCI)] are applied to downscale the latest climate forecast system reanalysis (CFSR) data to stations for precipitation, maximum temperature, and minimum temperature over South Korea. All methods are calibrated with observational station data for 19 years from 1973 to 1991 and validated for the more recent 19-year period from 1992 to 2010. We construct a comprehensive suite of performance metrics to inter-compare methods, which is comprised of five criteria related to time-series, distribution, multi-day persistence, extremes, and spatial structure. Based on the performance metrics, we employ technique for order of preference by similarity to ideal solution (TOPSIS) and apply 10,000 different weighting combinations to the criteria of performance metrics to identify a robust statistical downscaling method and important criteria. The results show that MACA and BCSD have comparable skill in the time-series related criterion and BCSD outperforms other methods in distribution and extremes related criteria. In addition, MACA and BCCA, which incorporate spatial patterns, show higher skill in the multi-day persistence criterion for temperature, while BCSD shows the highest skill for precipitation. For the spatial structure related criterion, BCCA and MACA outperformed BCSD and BCCI. From the TOPSIS analysis, we found that MACA is the most robust method for all variables in South Korea, and BCCA and BCSD are the second for temperature and precipitation, respectively. We also found that the contribution of the multi-day persistence and spatial structure related criteria are crucial to ranking the skill of statistical downscaling methods.     

Toxicity of organophosphorus pesticide sumithion on larval stages of stinging catfish <Emphasis Type="Italic">Heteropneustes fossilis</Emphasis>

Sumithion is widely used to control brittle in paddy fields and tiger bug in fish larval rearing ponds. The objective of this study was to elucidate the toxic effects of sumithion on larval stages of stinging catfish Heteropneustes fossilis. Larvae were exposed to two concentrations (150 and 250 μg/L) of sumithion with one control in three replicates of each. Larvae samples were collected at 20- and 24-h intervals followed by observation under a digital microscope. Exposures of stinging catfish larvae to sumithion produced deformities including irregular head shape, lordosis, yolk sac edema, body arcuation, tissue ulceration, etc. The mortality rates of larvae were significantly increased in response to increase in sumithion concentrations. Furthermore, around 30% of the total adult stinging catfish reared in sumithiontreated aquaculture ponds were found to be deformed permanently. These findings highlight that exposure of stinging catfish to sumithion at the critical and sensitive stages in their life cycle may significantly reduce the number of returning adults. Therefore, the use of sumithion for crop protection needs to be considered carefully and alternatives to sumithion should to be developed for controlling aquatic insects in aqua-ponds during larval rearing.     

Continuous zircon growth during long-lived granulite facies metamorphism: a microtextural,U–Pb,Lu–Hf and trace element study of Caledonian rocks from the Arctic

Microtextural, U–Pb, trace element and Lu–Hf analyses of zircons from gneisses dredged from the Chukchi Borderland indicate a long-lived, Cambrian–Ordovician, granulite facies metamorphism. These results reveal a complete prograde, peak and cooling history of zircon growth during anatexis. Early increasing temperatures caused modification and Pb-loss of Precambrian zircons by recrystallization and dissolution/re-precipitation of existing grains. Small variations in initial ¹⁷⁶Hf/¹⁷⁷Hf results (0.282325–0.282042) and flat HREE patterns of these zircons indicate that they grew by dissolution/re-precipitation in the presence of garnet. Zircons subsequently crystallized from a partial melt during peak to post-peak metamorphism from 530 to 485 Ma. A broad range of initial ¹⁷⁶Hf/¹⁷⁷Hf ratios (0.282693–0.282050) and mineral inclusions within zircons suggest that this phase of growth incorporated Zr and Hf obtained from the breakdown of Zr-enriched phases. Microtextural evidence along with trace element and isotopic data suggests that final growth of metamorphic rims on zircon occurred during slow cooling and crystallization of residual partial melts during the early Ordovician (485–470 Ma). Younger, late Ordovician–Silurian (420–450 Ma) euhedral, oscillatory-zoned, trace element-enriched zircons crystallized within leucocratic veins that intrude the gneisses. Their age corresponds to granitoids dated from this same dredge. The intrusives and veins provide evidence that the Chukchi Borderland rifted from a position near Pearya and northwest Svalbard, which represent the northern continuation of the Caledonian orogen. Evidence for earlier Cambrian metamorphism has not been reported from this region. The age of granulite facies metamorphism reported here represents the earliest phase of deformation in the Arctic Caledonides.     

Dehydration melting of solid amphibolite at 2.0 GPa: Effects of time and temperature

The dehydration melting of the natural rock at high pressure is important to investigating the magma formation in the earth’s interior. Since the 1970s, a lot of geological scientists have paid more atten- tion to the dehydration melting of the natural rock[1―5]. Previous experiments of dehydration melting and observations of fieldwork argued that the dehy- dration melting of the rock was probably the most important fashion for the melting of the lower crust rock[6―12]. The genesis of most …     

Electrical conductivity of the plagioclase–NaCl–water system and its implication for the high conductivity anomalies in the mid-lower crust of Tibet Plateau

In order to investigate the origin of the high conductivity anomalies geophysically observed in the mid-lower crust of Tibet Plateau, the electrical conductivity of plagioclase–NaCl–water system was measured at 1.2 GPa and 400–900 K. The relationship between electrical conductivity and temperature follows the Arrhenius law. The bulk conductivity increases with the fluid fraction and salinity, but is almost independent of temperature (activation enthalpy less than 0.1 eV). The conductivity of plagioclase–NaCl–water system is much lower than that of albite–NaCl–water system with similar fluid fraction and salinity, indicating a strong effect of the major mineral phase on the bulk conductivity of the brine-bearing system. The high conductivity anomalies of 10^?1 and 10⁰ S/m observed in the mid-lower crust of Tibet Plateau can be explained by the aqueous fluid with a volume fraction of 1 and 9%, respectively, if the fluid salinity is 25%. The anomaly value of 10^?1 S/m can be explained by the aqueous fluid with a volume fraction of 6% if the salinity is 10%. In case of Southern Tibet where the heat flow is high, the model of a thin layer of brine-bearing aqueous fluid with a high salinity overlying a thick layer of partial melt is most likely to prevail.     

‘A Case Study on a Polar Cold Air Outbreak over Fram Strait using a Mesoscale Weather Prediction Model’

The mesoscale weather prediction model ’Lokal-Modell’ (LM) of the Deutscher Wetterdienst is applied to the situation of an Arctic cold air outbreak in the Fram Strait region in April 1998. Observations are available from a flight along 5⁰E carried out during the ARTIST campaign. Initial and time-dependent boundary data for the simulation are taken from a larger scale operational model system. Using the standard configuration of LM, the simulation reproduced the propagation of cold air and the characteristic structure of the atmospheric boundary layer (ABL) in fair agreement with the observations. However, a detailed comparison revealed three basic problems. Firstly, there is evidence that the available data on sea-ice conditions were insufficient approximations to the true state for several reasons. A modification of the sea-ice data towards observations revealed that parts of the discrepancies were due to the original sea-ice data. Secondly, a control run with the model in its standard configuration shows an insufficient warming of the ABL downstream of the ice edge due to underestimation of surface heat fluxes. A simple modification of the approach for the scalar roughness length resulted in the strongest benefit, while comparative studies showed only a slight sensitivity to different types of parametrisation of turbulent mixing or the inclusion of an additional moist convection parametrisation. Thirdly, in all the simulations the deepening of the convective ABL downstream of the ice edge is weaker than observed. This may be partly due to the thermal stratification above the ABL in the analysis data, which is more stable than observed; but it may also be a hint to the fact that processes near the inversion are insufficiently parametrised in mesoscale models with resolutions as used in LM. The simulated cloud layer in the convective ABL is similar to that observed with respect to condensate content, a sharply defined cloud top, a diffuse lower bound, and continuous light precipitation.     

The most frequent interfaces in olivine aggregates: the GBCD and its importance for grain boundary related processes

Rocks consist of crystal grains separated by grain boundaries that impact the bulk rock properties. Recent studies on metals and ceramics showed that the grain boundary plane orientation is more significant for grain boundary properties than other characteristics such as the sigma value or disorientation (in the Earth’s science community more frequently termed misorientation). We determined the grain boundary character distribution (GBCD) of synthetic and natural polycrystalline olivine, the most abundant mineral of Earth’s upper mantle. We show that grain boundaries of olivine preferentially contain low index planes, in agreement with recent findings on other oxides (e.g. MgO, TiO₂, Al₂O₃ etc.). Furthermore, we find evidence for a preferred orientation relationship of 90° disorientations about the [001] direction forming tilt and twist grain boundaries, as well as a preference for the 60° disorientation about the [100] axis. Our data indicate that the GBCD, which is an intrinsic property of any mineral aggregate, is fundamental for understanding and predicting grain boundary related processes.     

Terrain Pattern Recognition and Spatial Decision Making for Regional Slope Stability Studies

A terrain partition scheme is presented that allows the identification of regions with high landslide risk in natural terrain zones on the basis of geomorphometric criteria from moderate resolution DEMs. The key factor being the terrain segmentation to aspect regions (regions formed by points preserving the same aspect direction) instead of using an artificial regular-grid terrain partition scheme. The study area is in western Greece (NW Peloponnesus) whereas a moderate resolution digital elevation model with spacing 75 m is used. Landslide inventory analysis and knowledge conceptualization identified that the landslide susceptibility of a particular aspect region is high, if the mean elevation is low and the mean gradient is high. Each aspect region was parametrically represented on the basis of its mean gradient and elevation. The domain of each parameter was divided to seven slices (classes) on the basis of the observed density. Subsequent knowledge based mapping identified aspect regions with high landslide susceptibility for the following spatial rule: (a) “mean slope in class 6 or 7” and (b) “mean elevation in class 1 to 5”. Alternatively the rule is expressed as mean slope to be equal or greater than 15^∘ whereas mean elevation to be in the range 0 to 750 m. These identified zones correspond to regions where historical landslides occurred (populated coastal areas in the North) as well as to south regions (natural terrain zone) where no landslide record is available, because of the limitations posed by the natural terrain landslide mapping program in Greece. The presented terrain segmentation technique combined to the spatial decision-making process, provided both an object framework for integrating geomorphometric parameters and a method for landslide risk analysis in natural terrain zones.