Evaluating the effects of ground motion parameters on response spectra in Uttarakhand Himalayas,India

Uttarakhand, a state of India, is located in seismically active Himalayan region and in the proximity of plate boundaries. The effects of important ground motion parameters like magnitude, distance, and local geology and site conditions on acceleration response spectra are examined in Uttarakhand Himalayas in this work. A total of 447 strong ground motion histories (horizontal and vertical) from 42 earthquakes were selected. The results show that the shape of the acceleration response spectra is influenced by the local site conditions and regional geology. The studies are carried out for two categories of sites, i.e., rock sites and soft soil sites. The maximum average horizontal spectral amplification for rock sites is 2.7 at 0.1 s, while for soft soil sites, it is found to be 3.2 at 0.2 s. In the same way, the maximum average vertical spectral amplification for rock is found to be 2.7 at 0.1 s, while for soft soil, it is found to be 2.95 at 0.1 s. The average spectral amplification in vertical component also shifts from low period (rock) to high period (soft soil). The level of spectra increases with decrease in distance for rock sites as well as soft soil sites. When comparing different magnitude earthquakes in different geological conditions, the response spectra are found to follow each other up to 0.04 s, while for period greater than 0.04 s, the spectra of higher magnitude earthquake is observed on the higher side. For soft soil sites, spectra from different magnitude earthquakes are observed to follow each other up to 0.1 s, beyond which they get separated.     

Implications of urban expansion on land use and land cover: towards sustainable development of Mega Manila,Philippines

GeoJournal - Planning of land use and infrastructure in advance for a population that is projected to grow rapidly is highly important for its sustainable development. A correlative approach of...     

Groundwater Quality assessment using Water Quality Index (WQI) in parts of Varanasi District,Uttar Pradesh,India

Either naturally occurring process or human activities may have a significant impact on the quality of sub-surface waters which further limit its use. Multivariate statistical techniques such as factor analysis (FA), cluster analysis (CA) were applied for the evaluation of spatial variations and the interpretation of ground water quality data around Bacheli and Kirandul area. The major anions, cations and heavy metals were determined for each of 20 samples collected in pre-monsoon seasons. Hydrochemical parameters like EC, pH, TDS, TH, TA, Na⁺, K⁺, Ca²⁺, Cl^-, F^-, SO₄^2-, As, Sb, Se, Pb, Cd, Zn, Cu were estimated in pre monsoon and post monsoon seasons. Different geochemical controls of the investigated parameters were also assessed. Factor 1 explains 33.47% of the total variance and indicates atmospheric controls and silicate mineral weathering process. Factor 2 explains 13.83% of total variance, indicating silicate mineral weathering process resulting in elevated pH. Generally, water types tend towards magnesium-bicarbonate-chloride.     

Hillslope response to tectonic forcing in threshold landscapes

Hillslopes are thought to poorly record tectonic signals in threshold landscapes. Numerous previous studies of steep landscapes suggest that large changes in long‐term erosion rate lead to little change in mean hillslope angle, measured at coarse resolution. New LiDAR‐derived topography data enables a finer examination of threshold hillslopes. Here we quantify hillslope response to tectonic forcing in a threshold landscape. To do so, we use an extensive cosmogenic beryllium‐10 (¹⁰Be)‐based dataset of catchment‐averaged erosion rates combined with a 500 km² LiDAR‐derived 1 m digital elevation model to exploit a gradient of tectonic forcing and topographic relief in the San Gabriel Mountains, California. We also calibrate a new method of quantifying rock exposure from LiDAR‐derived slope measurements using high‐resolution panoramic photographs. Two distinct trends in hillslope behavior emerge: below catchment‐mean slopes of 30°, modal slopes increase with mean slopes, slope distribution skewness decreases with increasing mean slope, and bedrock exposure is limited; above mean slopes of 30°, our rock exposure index increases strongly with mean slope, and the prevalence of angle‐of‐repose debris wedges keeps modal slopes near 37°, resulting in a positive relationship between slope distribution skewness and mean slope. We find that both mean slopes and rock exposure increase with erosion rate up to 1 mm/a, in contrast to previous work based on coarser topographic data. We also find that as erosion rates increase, the extent of the fluvial network decreases, while colluvial channels extend downstream, keeping the total drainage density similar across the range. Our results reveal important textural details lost in 10 or 30 m resolution digital elevation models of steep landscapes, and highlight the need for process‐based studies of threshold hillslopes and colluvial channels. Copyright © 2012 John Wiley & Sons, Ltd.     

Wind waves and sediment transport regime off the south-central Kerala coast,India

Wind waves in the innershelf of the south-central Kerala coast, south-west India were measured at four locations during different seasons. Simultaneously, numerical models were developed to simulate the wave and sediment transport regime of the innershelf. Strong monsoonal influence is seen in the wave characteristics with greater amplitudes, lower periods and switch-over from SW to SWW–W direction. The net annual longshore sediment transport is southerly in the innershelf and northerly in the surf zone. These counter-directional transports are linked by seasonally reversing the cross-shore transports. In the locations where the transports in the longshore and cross-shore directions are balanced, stable beaches prevail. Erosion/accretion tendency prevails in locations where these transports are not balanced. The southern and northern parts of the coast where onshore transports are predominant could be accreting zones. The erosion/accretion pattern deduced from the sediment transport model corresponds well with the long-term erosion/accretion trend for this coast.     

The b-value and fractal dimension of local seismicity around Koyna Dam (India)

Earthquakes began to occur in Koyna region (India) soon after the filling of Koyna Dam in 1962. In the present study, three datasets 1964–1993, 1993–1995, and 1996–1997 are analyzed to study the b-value and fractal dimension. The b-value is calculated using the Gutenberg–Richter relationship and fractal dimension D _corr. using correlation integral method. The estimated b-value and D _corr. of this region before 1993 are found to be in good agreement with previously reported studies. In the subsequent years after 1995, the b-value shows an increase. The estimated b-values of this region are found within the limits of global average. Also, the pattern of spatial clustering of earthquakes show increase in clustering and migration along the three zones called North-East Zone, South-East Zone (SEZ), and Warna Seismic Zone. The earthquake events having depth ≤5 km are largely confined to SEZ. After 1993, the D _corr. shows decrease, implying that earthquake activity gets clustered. This seismic clustering could be helpful for earthquake forecasting.     

Bedload-to-suspended load ratio and rapid bedrock incision from Himalayan landslide-dam lake record

About 5400 cal yr BP, a large landslide formed a > 400-m-tall dam in the upper Marsyandi River, central Nepal. The resulting lacustrine and deltaic deposits stretched > 7 km upstream, reaching a thickness of 120 m. ¹⁴C dating of 7 wood fragments reveals that the aggradation and subsequent incision occurred remarkably quickly (∼ 500 yr). Reconstructed volumes of lacustrine (∼ 0.16 km³) and deltaic (∼ 0.09 km³) deposits indicate a bedload-to-suspended load ratio of 1:2, considerably higher than the ≤ 1:10 that is commonly assumed. At the downstream end of the landslide dam, the river incised a new channel through ≥ 70 m of Greater Himalayan gneiss, requiring a minimum bedrock incision rate of 13 mm/yr over last 5400 yr. The majority of incision presumably occurred over a fraction of this time, suggesting much higher rates. The high bedload ratio from such an energetic mountain river is a particularly significant addition to our knowledge of sediment flux in orogenic environments.     

Weathering the escarpment: chemical and physical rates and processes,south‐eastern Australia

Differences in chemical weathering extent and character are expected to exist across topographic escarpments due to spatial gradients of climatic and/or tectonic forcing. The passive margin escarpment of south‐eastern Australia has a debated but generally accepted model of propagation in which it retreated (within 40 Ma) to near its current position following rifting between Australia and New Zealand 85–100 Ma before present. We focus on this escarpment to quantify chemical weathering rates and processes and how they may provide insight into scarp evolution and retreat. We compare chemical weathering extents and rates above and below the escarpment using a mass balance approach coupling major and trace element analyses with previous measurements of denudation rates using cosmogenic nuclides (¹⁰Be and ²⁶Al). We find a slight gradient in saprolite chemical weathering rate as a percentage of total weathering rate across the escarpment. The lowlands area, encompassing the region extending from the base of the escarpment to the coast, experiences a greater extent of chemical weathering than the highland region above the escarpment. Percents of denudation attributable to saprolite weathering average 57 ± 6% and 47 ± 7% at low and high sites respectively. Furthermore, the chemical index of alteration (CIA), a ratio of immobile to mobile oxides in granitic material that increases with weathering extent, have corresponding average values of 73·7 ± 3·9 and 65·5 ± 3·4, indicating lower extents of weathering above the escarpment. Finally, we quantify variations in the rates and extent of chemical weathering at the hillslope scale across the escarpment to suggest new insight into how climate differences and hillslope topography help drive landscape evolution, potentially overprinting longer term tectonic forcing. Copyright © 2009 John Wiley & Sons, Ltd.     

Landscape form and millennial erosion rates in the San Gabriel Mountains,CA

It has been long hypothesized that topography, as well as climate and rock strength, exert first order controls on erosion rates. Here we use detrital cosmogenic ¹⁰Be from 50 basins, ranging in size from 1 to 150 km², to measure millennial erosion rates across the San Gabriel Mountains in southern California, where a strong E–W gradient in relief compared to weak variation in precipitation and lithology allow us to isolate the relationship between topographic form and erosion rate. Our erosion rates range from 35 to 1100 m/Ma, and generally agree with both decadal sediment fluxes and long term exhumation rates inferred from low temperature thermochronometry. Catchment-mean hillslope angle increases with erosion rate until ～ 300 m/Ma, at which point slopes become invariant with erosion rate. Although this sort of relation has been offered as support for non-linear models of soil transport, we use 1-D analytical hillslope profiles derived from existing soil transport laws to show that a model with soil flux linear in slope, but including a slope stability threshold, is indistinguishable from a non-linear law within the scatter of our data. Catchment-mean normalized channel steepness index increases monotonically, though non-linearly, with erosion rate throughout the San Gabriel Mountains, even where catchment-mean hillslope angles have reached a threshold. This non-linearity can be mostly accounted for by a stochastic threshold incision model, though additional factors likely contribute to the observed relationship between channel steepness and erosion rate. These findings substantiate the claim that the normalized channel steepness index is an important topographic metric in active ranges.     

Coupling chemical weathering with soil production across soil‐mantled landscapes

Soil‐covered upland landscapes constitute a critical part of the habitable world. Our understanding of how they evolve as a function of different climatic, tectonic and geological regimes is important across a wide range of disciplines and depends, in part, on understanding the links between chemical and physical weathering processes. Extensive previous work has shown that soil production rates decrease with increasing soil column thickness, but chemical weathering rates were not measured. Here we examine a granitic, soil‐mantled hillslope at Point Reyes, California, where soil production rates were determined using in situ produced cosmogenic nuclides (¹⁰Be and ²⁶Al), and we quantify the extent as well as the rates of chemical weathering of the saprolite from beneath soil from across the landscape. We collected saprolite samples from the base of soil pits and analysed them for abrasion pH as well as for major and trace elements by X‐ray fluorescence spectroscopy, and for clay mineralogy by X‐ray diffraction spectroscopy. Our results show for the first time that chemical weathering rates decrease with increasing soil thickness and account for 13 to 51 per cent of total denudation. We also show that spatial variation in chemical weathering appears to be topographically controlled: weathering rate decreases with slope across the divergent ridge and increases with upslope contributing area in the convergent swale. Furthermore, to determine the best measure for the extent of saprolite weathering, we compared four different chemical weathering indices – the Vogt ratio, the chemical index of alteration (CIA), Parker's index, and the silicon–aluminium ratio – with saprolite pH. Measurements of the CIA were the most closely correlated with saprolite pH, showing that weathering intensity decreases linearly with an increase in saprolite pH from 4·7 to almost 7. Data presented here are among the first to couple directly rates of soil production and chemical weathering with how topography is likely to control weathering at a hillslope scale. Copyright © 2006 John Wiley & Sons, Ltd.