Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

Retrofit-reinforcement of cohesive soil slopes using high strength geotextiles with drainage capability

A series of geotechnical centrifuge physical modeling tests were performed to assess the potential use of a new cost-effective mechanically stabilized earth system for retrofitting marginally stable cohesive slopes. The proposed system utilizes the dual functions of reinforcement and drainage by directly inserting high strength non-woven geotextile strips into slopes, with little or no excavation required behind the slope face. The system significantly increases the factor of safety of potentially unstable cohesive slopes, and can be constructed at less expense and more rapidly than conventional mechanically stabilized earth systems.     

Magmatic zircon oxygen isotopes of 1.88–1.87 Ga orogenic and 1.65–1.54 Ga anorogenic magmatism in Finland

Summary Oxygen isotope ratios of igneous zircon from magmatic rocks in Finland provide insights into the evolution and growth of the Precambrian crust during the Svecofennian orogeny. These data preserve magmatic δ¹⁸O values and correlate with major discontinuities in the lower crust. Oxygen isotope ratios of zircon across the 1.88–1.87 Ga Central Finland granitoid complex (CFGC) range from 5.50‰ to 6.84‰, except for three plutons in contact with the adjacent greenstone and metasedimentary belts (δ¹⁸O(Zrc) = 7.60‰–7.78‰). There is a systematic variation in δ¹⁸O(Zrc) with respect to geographic location in the CFGC, ranging from 6.60±0.23‰ (σ) in the northeast to 5.90±0.40‰ in the west-southwest. These values correlate with a change in crustal thickness and shift in geochemical composition. The oxygen isotope composition of the 1.65–1.54 Ga rapakivi granites and related rocks in southern Finland show a decreasing trend from north to south, independent of their emplacement age. The southern anorogenic granite group has an average δ¹⁸O in zircon of 6.14±0.07‰ and the northern anorogenic group has an average δ¹⁸O in zircon of 8.14±0.59‰. This difference reflects the boundary between island arc terrains accreted during the Paleoproterozoic. Deceased     

Modeling of packed absorption tower for volatile organic compounds emission control

Development of chemical industry and high vapor pressure of volatile organic compounds (VOCs) have been caused that these materials recently be considered as a source of air pollution. These are different methods for separation of VOC from air that absorption by suitable and selective solvent is an efficient method. In this research, mathematical modeling of a packed absorption tower for separation of VOCs from air has been presented. Then, acetone vapors separation in this tower and with Intalox saddle packing has been investigated. Concentration of acetone in inlet air stream was 1.5 mol % which has reduced to 150 ppm (0.015 mol %) in effluent air stream. The results show that the packed absorption tower with this type of packing can separate 99% of acetone vapors. Comparison of the results obtained by Intalox saddle packing with the results obtained by another type of packing (with trade mark of Kerapak patented by Sulzer Company) shows that the tower gives the same efficiency for acetone separation. Thus, the efficiency of absorption process, mainly, depends on solvent type, composition of VOC in feed air, desired composition of VOC in outlet air (or percentage of VOC separation) and pressure drop.     

Seasonal records of climatic change in annually laminated tufas: short review and future prospects

Many Recent and fossil freshwater tufa stromatolites contain millimetre‐scale, alternating laminae of dense micrite and more porous or sparry crystalline calcites. These alternating laminae have been interpreted to represent seasonally controlled differences in the biotic activity of microbes, and/or seasonally controlled changes in the rate of calcification. Either way, couplets of these microbially mediated alternating calcified laminae are generally agreed to represent annual seasonality. Combined stable isotope (δ¹⁸O and δ¹³C) and trace element (Mg, Sr, Ba) geochemistry from Recent tufa stromatolites show that seasonal climatic information is available from these calcites. Variability in δ¹⁸O (and in one case Mg concentration) has been shown to be controlled primarily by stream temperature change, usually driven by solar insolation. In arid climates, seasonal evaporation can also cause δ¹⁸O enrichment by at least 1‰. Variability in δ¹³C results potentially from: (1) seasonal change in plant uptake of ¹²C‐enriched CO₂; (2) seasonal change in degassing of ¹²C‐enriched CO₂ in the aquifer system; and (3) precipitation of calcite along the aquifer or river flow path, a process that increases δ¹³C of dissolved inorganic carbon (DIC) in the remaining water. Mechanisms 2 and 3 are linked because calcite precipitates in aquifers where degassing occurs, e.g. air pockets. The latter mechanism for δ¹³C enrichment has also been shown to cause sympathetic variation between trace element/Ca ratios and δ¹³C because trace elements with partition coefficients much greater than 1 (e.g. Sr, Ba) remain preferentially in solution. Since degassing in air pockets will be enhanced during decreased recharge when water saturation of the aquifer is lowest, sympathetic variation in trace element/Ca ratios and δ¹³C is a possible index of recharge and therefore precipitation intensity. High‐resolution geochemical data from well‐dated tufa stromatolites have great potential for Quaternary palaeoclimate reconstructions, possibly allowing recovery of annual seasonal climatic information including water temperature variation and change in rainfall intensity. However, careful consideration of diagenetic effects, particularly aggrading neomorphism, needs to be the next step. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

GIS-based detachment susceptibility analyses of a cut slope in limestone, Ankara—Turkey

Due to the rapidly growing population of the city of Ankara (Turkey) and increased traffic congestion, it has become necessary to widen the Ankara-Eskişehir (E-90) highway connecting the newly built areas west of the city to the city center. During widening, several cut slopes were formed along the highway route. As a result, some instability problems (small-sized rock falls/sliding, sloughing, raveling) produced detachment zones along a cut slope in highly jointed, folded and sheared limestone, causing local degradation of the cut slope. Identification of the areas that are likely to detach from the cut slope in the future is considered to be very important for the application of remedial measures. For this purpose, the relationships between the existing detachment zones and various parameters (e.g., point load strength index, weathering, block size, daylighting, shear zone) were investigated using GIS-based statistical detachment susceptibility analyses in order to predict the further aerial extension of the detachment zones with time. During the overlay analyses, statistical index and weighting factor methods were used. The outcomes of the analyses were compared and evaluated with the field observations to check the reliability of the methods and to assess the detachment zones that may develop in the future. The detachment susceptibility map without the block-size layer gives the best result and indicates some risky zones where detachments are likely to occur in the future. Recommendations on remedial measures of the cut slope should consider these risky zones.     

Native and artificial radiation-induced defects in montmorillonite. An EPR study

A natural montmorillonite containing radiation-induced defects was studied with Electron Paramagnetic Resonance (EPR) spectroscopy (X- and Q-band). A first dominant native defect, namely native defect 1, is identified. It gives rise to an orthorhombic spectrum with g_x= 2.004 ± 0.005 g_y= 2.010 ± 0.003, g_z= 2.065 ± 0.002. Simulation of the EPR spectrum at X- and Q-band reveals a second native defect with isotropic spectrum at g= 2.019 ± 0.005. Both are electron holes trapped on oxygen atoms of the structure. The native defect 1 is located on an oxygen-silicon bond or a non-bonding orbital parallel to the c* axis. These defects are annealed at 500°C and the half-life determined for native defect 1 is circa 3,000 years. Irradiations with beta rays produced two additional hole centers of lower stability and distinct EPR parameters. Artificial irradiations show that montmorillonite can be used as a dosimeter in a large dose range.