Carbonate platform depositional sequences, Upper Cretaceous, south-central Pyrenees (Spain)

The Upper Cretaceous (Cenomanian-Maastrichtian) of the south-central Pyrenees shows five carbonate platform sequences where the major parameters are tectonism, relative sea-level fluctuations and inherited depositional profile. Depositional geometries and basin analysis permit an understanding of the depositional history.Five depositional sequences have been recognized: (1) The Santa Fe sequence (Middle-Upper Cenomanian), a ramp to a skeletal rimmed shelf with an escarpment bypass margin. The lower boundary is an angular unconformity and the upper one records a sea-level drop. The platform location of the margin was determined by a listric normal fault. (2) An abrupt sea-level rise drowned the former platform. The Congost sequence (Turonian-Lower Coniacian), a distally steepened ramp with erosional distal deep slope. The depositional model was largely controlled by pre-existing basin morphology. Cessation of platform development was due to a relative sea-level drop. (3) The Sant Corneli sequence (Upper Coniacian-Lower Santonian), a mixed terrigenous-skeletal homoclinal ramp with upright margin, deep slope and dysaerobic basin. The slope results from the backstepping by 24 km of the previous margin and gentle basin tilting. The platform margin remained more or less at the same position, and relief between platform and slope increased indicating continuous relative sea-level rise. The upper boundary is an angular unconformity at the platform margin produced by an abrupt sea-level rise and platform drowning, and by listric normal faulting. (4) The Vallcarga sequence (Upper Santonian-Campanian), a distal-steepened skeletal homoclinal ramp, erosional escarpment and turbidite basin, which corresponds to the Mesozoic maximum marine expansion. A listric normal fault created two depositional areas: a more or less flat footwall block with a north-northwest prograding carbonate ramp.     

The study of metal contamination in urban topsoils of Mexico City using GIS

This research presents and discusses information concerning the spatial distribution of heavy metals (Pb, Cu, Zn, Ba, Co, Cr, Ni and V) in the urban environments of Mexico City using geographical information system and statistical analysis. Superficial soil samples (n = 146) were analyzed. The highest contamination indices were found in the north and center zone of the metropolitan area. In contrast, the surrounding rural fields show a lower impact grade. The higher concentrations of Pb, Cu, Zn and Ba were observed as being related to high vehicular traffic, nevertheless other elements such as Co, Cr, Ni and V do not show anthropogenic influence and their content can be attributed to the parental rock. The results are compared with previous surveys carried out in 2003 in order to evaluate temporal deposition trends. No changes were found on reported concentrations except for Cu and Zn, whose concentration has increased in later years. The results suggest that spatial distribution analysis and results in comparison with previous studies could be useful for the management and sustainable development of the metropolitan area of Mexico City.     

Partitioning,bioavailability and origin of heavy metals from the Nador Lagoon sediments (Morocco) as a basis for their management

Nador Lagoon sediments show low trace element concentrations, and, in relation to the lagoon geochemical baseline, only some anomalies for As, Cd, Cu and Pb in the NW of the lagoon deserve to be outstanding. The distribution of major, minor and trace elements in the lagoon allows a breakdown in four zones. Between “Beni Ensar” and “Atelouane” (zone A), a quite confined zone rich in organic matter and S, the most important trace-element anomalies (As, Cd, Co, Cu, Mn, Pb, Zn) were found, mainly around industry and old mining activities. In the surrounding of the city of Nador (zone B), the anomalies correspond to Mn, Cu and Zn. The coastal barrier and Kebdana channel (zone C) show moderately concentrations of Cd, Cr and Ni at specific sites. The less polluted area is the SE of the lagoon (zone D), with no outstanding anomaly. In lagoon sediments, metal bioavailability is very low. The metal partitioning patterns show that Cu, Pb and Zn present a low availability because they are bounded to the residual, non-mobile phases of the sediments. Only in some sites, the fraction was associated with organic matter, which could be liberated easily. Arsenic is concentrated in both the residual phases and the organic matter, the latter being more available. Cadmium is mainly concentrated in some samples in the interchangeable fraction, which could be considered as a potentially toxic element because it is easily released. Concerning the origin of these trace elements, those found in zone A correspond mostly to a natural source by weathering of mount Gourougou volcanic rocks (As, Co, Cu, Pb and Zn), and to an anthropogenic origin (Cd) owing to the presence of industry and old mines. In zone B, contributions of Cu and Zn enter the lagoon through soil weathering and river-borne, and as anthropogenic pollution from urban wastes. In zone C the most important pollutant is Cd deduced to be of anthropogenic origin from the close industry and intensive agriculture area. In spite of the intense socio-economic activities developed in the Nador Lagoon (agriculture, industry, fishing, tourism) trace element concentrations in the sediments are low and with scarce bioavailability. Only the NW sector is relativity polluted because of geogenic features.     

Metamorphic kyanite eclogites in the lufilian arc of Zambia

Eclogites formed by the Lufilian (post-Katanga) metamorphism of gabbros intruded into rocks of the Katanga System (Upper Proterozoic) occur in the Central Province of Zambia. Typical constituents of these rocks are omphacite, almandine garnet with significant contents of the pyrope and grossular components, kyanite and rutile. Eclogites from some localities display well preserved, relict ophitic texture inherited from the original gabbro. Hornblende-scapolite metagabbro and coronite metagabbro often accompany the eclogites, and metalherzolite and serpentinite occur at a few localities. The Zambian eclogites are broadly associated with a variety of relatively high-pressure, kyanite-bearing mineral assemblages some of which are possibly in the eclogite facies. It is suggested that, in addition to temperature and load pressure, fluid pressure, fluid composition (H₂O, CO₂, Cl, SO₃) and permeability of the gabbro due to deformation were important factors for the transformation of gabbro to eclogite in the environment of the Lufilian Arc.     

The infrared dielectric properties of maghemite, γ-Fe2O3, from reflectance measurement on pressed powders

The infrared complex permittivity functions of three varieties of maghemite, γ-Fe₂O₃, having different degrees of vacancy ordering, have been determined from their IR reflectance spectra, measured at near to normal incidence on pressed powder pellets. The optical constants therefrom obtained have been verified by using them in the simulation of the corresponding absorption spectra for KBr-diluted pellets, and these are in excellent agreement with the experimental spectra. All calculations are based on a procedure for the estimation of the effective dielectric function of a mixture, which incorporates percolation features, recently developed by the authors.     

Mean flow-transient perturbation interaction in the Southern Hemisphere: a simulation using a variable-resolution GCM

The ability of an atmospheric general circulation model to reproduce fundamental features of the wintertime extratropical Southern Hemisphere (SH) circulation is evaluated with emphasis on the daily variability of the SH mean flow and the mean flow-transient perturbations interaction. Two 10-year simulations using a new version of the LMDZ GCM with a stretched grid scheme centered at 45 °S and forced by climatological SST are performed: a high (144Ꮡ) and low (64Ꭹ) horizontal resolution runs. The performance of both simulations was determined by comparing several simulated fields (zonal wind, temperature, kinetic energy, transient eddy momentum and heat fluxes, Eliassen-Palm fluxes, Eady growth rate and baroclinic conversion term) against the European Centre for Medium Range Weather Forecast reanalyses (ERA). High and low-resolution simulations are similar in many respects; in particular, both experiments reproduce the main patterns of the southern extratropical large-scale circulation satisfactorily. Increasing resolution does not improve universally some spurious aspects of the low resolution simulation (e.g. the cold bias in the high polar troposphere, the debilitated subtropical jet, the low baroclinic conversion rate). Those aspects present little sensitivity to the model resolution. The interaction between transient eddies and zonal mean flow are examined. The low-resolution experiment is able to qualitatively represent the acceleration/deceleration of the mean flow by transient perturbations, south/north of 30 °S with an accuracy similar to that of the high-resolution experiment. Although both experiments represent the baroclinic structure of the mean flow satisfactorily, the model underestimates some transient properties due to the underestimation of the baroclinic conversion term in middle latitudes. Such misrepresentation does not improve with increasing resolution and is related to the relatively weak meridional temperature gradient and the inadequate geographical distribution of the eddy heat fluxes. In particular, the eddy kinetic energy is always underestimated. Eddy kinetic energy does not improve convincingly with increasing resolution, suggesting that the adequate representation of the storm tracks is highly influenced by the physical parametrizations.     

Biases in the diurnal temperature range in Central Europe in an ensemble of regional climate models and their possible causes

The study examines how regional climate models (RCMs) reproduce the diurnal temperature range (DTR) in their control simulations over Central Europe. We evaluate 30-year runs driven by perfect boundary conditions (the ERA40 reanalysis, 1961–1990) and a global climate model (ECHAM5) of an ensemble of RCMs with 25-km resolution from the ENSEMBLES project. The RCMs’ performance is compared against the dataset gridded from a high-density stations network. We find that all RCMs underestimate DTR in all seasons, notwithstanding whether driven by ERA40 or ECHAM5. Underestimation is largest in summer and smallest in winter in most RCMs. The relationship of the models’ errors to indices of atmospheric circulation and cloud cover is discussed to reveal possible causes of the biases. In all seasons and all simulations driven by ERA40 and ECHAM5, underestimation of DTR is larger under anticyclonic circulation and becomes smaller or negligible for cyclonic circulation. In summer and transition seasons, underestimation tends to be largest for the southeast to south flow associated with warm advection, while in winter it does not depend on flow direction. We show that the biases in DTR, which seem common to all examined RCMs, are also related to cloud cover simulation. However, there is no general tendency to overestimate total cloud amount under anticyclonic conditions in the RCMs, which suggests the large negative bias in DTR for anticyclonic circulation cannot be explained by a bias in cloudiness. Errors in simulating heat and moisture fluxes between land surface and atmosphere probably contribute to the biases in DTR as well.     

A Monte Carlo Model Of The Nocturnal Surface Temperatures In Urban Canyons

A model for the urban canyon is formulated for meteorologicalconditions of weak winds at night time. Thermal radiation, conductivity and convection are simulated by means of the Monte Carlo method. These are the main physical processesof energy transfer that give rise to the characteristic temperaturedistribution in these systems. The model has been satisfactory tested under ideal conditions for which analytical solutions exist.The predictions of the model under morerealistic conditions accurately reproduce the observationalresults. A strong temperature gradient across streets, with the canyon corners up to 4 °C warmer than the canyon centre, is found for the deepest canyons. This theoretical predictionhas been successfully verified with measurementstaken in a number of streets of the city of Granada in Spain.     

Permian volcanism in the Central Western Carpathians (Slovakia): Basin-and-Range type rifting in the southern Laurussian margin

The 1,500- to 2,000-m-thick Permian volcano-sedimentary Malu?iná Formation of the uppermost nappe of the Central Western Carpathians (a segment of the Alpine-Carpathian orogenic belt) occurs in several fault blocks distributed across Slovakia. This unit is a part of a post-Variscan overstep suite that followed accretion of the Gothic terranes to Laurussia. It consists of three upward-fining megacycles of semi-arid/arid, fluvial-lacustrine clastic redbeds and local dolomites and evaporites. Abundant intercalated volcanic rocks are predominantly mafic lava flows; volcaniclastic rocks and dykes are subordinate. Felsic rocks are represented by rare volcaniclastics and dykes. Compositionally, the mafic rocks are rift-related continental tholeiites with enriched light REE patterns having (La/Yb)_n ratios between 2 and 5.5 and with mantle-normalized patterns characterized by negative Nb-Ta anomalies. The rocks were derived from subcontinental lithospheric mantle and were affected by crustal contamination. It is inferred that the volcanism of the Malu?iná Formation formed in a Basin and Range tectonic setting in which rifting followed collision of the Palaeo-Tethys ridge with the trench bordering southern Laurussia. This model can be applied to other Permian volcanic suites of rift basins in the Eastern Alps and Carpathians over a strike-length of about 1,000 km, which indicates the width of the slab window.     

Response of single benthic metrics and multi-metric methods to anthropogenic pressure gradients, in five distinct European coastal and transitional ecosystems

In recent times many benthic indices have been proposed to assess the ecological quality of marine waters worldwide. In this study we compared single metrics and multi-metric methods to assess coastal and transitional benthic status along human pressure gradients in five distinct environments across Europe: Varna bay and lake (Bulgaria), Lesina lagoon (Italy), Mondego estuary (Portugal), Basque coast (Spain) and Oslofjord (Norway). Hence, 13 single metrics (abundance, number of taxa, and several diversity and sensitivity indices) and eight of the most common indices used within the European Water Framework Directive (WFD) for benthic assessment were selected: index of size spectra (ISS), Benthic assessment tool (BAT), Norwegian quality index (NQI), Multivariate AMBI (M-AMBI), Benthic quality index (BQI), (Benthic ecosystem quality index (BEQI), Benthic index based on taxonomic sufficiency (BITS), and infaunal quality index (IQI). Within each system, sampling sites were ordered in an increasing pressure gradient according to a preliminary classification based on professional judgement. The different indices are largely consistent in their response to pressure gradient, except in some particular cases (i.e. BITS, in all cases, or ISS when a low number of individuals is present). Inconsistencies between indicator responses were most pronounced in transitional waters (i.e. IQI, BEQI), highlighting the difficulties of the generic application of indicators to all marine, estuarine and lagoonal environments. However, some of the single (i.e. ecological groups approach, diversity, richness) and multi-metric methods (i.e. BAT, M-AMBI, NQI) were able to detect such gradients both in transitional and coastal environments, being these multi-metric methods more consistent in the detection than single indices. This study highlights the importance of survey design and good reference conditions for some indicators. The agreement observed between different methodologies and their ability to detect quality trends across distinct environments constitutes a promising result for the implementation of the WFD’s monitoring plans. Moreover, these results have management implications, regarding the dangers of misclassification, uncertainty in the assessment, use of conflicting indices, and testing and validation of indices.