Review of vibroseis data acquisition and processing for better amplitudes: adjusting the sweep and deconvolving for the time-derivative of the true groundforce

The goal of vibroseis data acquisition and processing is to produce seismic reflection data with a known spatially-invariant wavelet, preferably zero phase, such that any variations in the data can be attributed to variations in geology. In current practice the vibrator control system is designed to make the estimated groundforce equal to the sweep and the resulting particle velocity data are cross-correlated with the sweep. Since the downgoing far-field particle velocity signal is proportional to the time-derivative of the groundforce, it makes more sense to cross-correlate with the time-derivative of the sweep. It also follows that the ideal amplitude spectrum of the groundforce should be inversely proportional to frequency. Because of non-linearities in the vibrator, bending of the baseplate and variable coupling of the baseplate to the ground, the true groundforce is not equal to the pre-determined sweep and varies not only from vibrator point to vibrator point but also from sweep to sweep at each vibrator point. To achieve the goal of a spatially-invariant wavelet, these variations should be removed by signature deconvolution, converting the wavelet to a much shorter zero-phase wavelet but with the same bandwidth and signal-to-noise ratio as the original data. This can be done only if the true groundforce is known. The principle may be applied to an array of vibrators by employing pulse coding techniques and separating responses to individual vibrators in the frequency domain. Various approaches to improve the estimate of the true groundforce have been proposed or are under development; current methods are at best approximate.     

Subarctic catchment water storage and carbon cycling – Leading the way for future studies using integrated datasets at Pallas,Finland

Subarctic ecohydrological processes are changing rapidly, but detailed and integrated ecohydrological investigations are not as widespread as necessary. We introduce an integrated research catchment site (Pallas) for atmosphere, ecosystems, and ecohydrology studies in subarctic conditions in Finland that can be used for a new set of comparative catchment investigations. The Pallas site provides unique observational data and high-intensity field measurement datasets over long periods. The infrastructure for atmosphere- to landscape-scale research in ecosystem processes in a subarctic landscape has recently been complemented with detailed ecohydrological measurements. We identify three dominant processes in subarctic ecohydrology: (a) strong seasonality drives ecohydrological regimes, (b) limited dynamic storage causes rapid stream response to water inputs (snowmelt and intensive storms), and (c) hydrological state of the system regulates catchment-scale dissolved carbon dynamics and greenhouse (GHG) fluxes. Surface water and groundwater interactions play an important role in regulating catchment-scale carbon balances and ecosystem respiration within subarctic peatlands, particularly their spatial variability in the landscape. Based on our observations from Pallas, we highlight key research gaps in subarctic ecohydrology and propose several ways forward. We also demonstrate that the Pallas catchment meets the need for sustaining and pushing the boundaries of critical long-term integrated ecohydrological research in high-latitude environments.     

Elasticity of antigorite,seismic detection of serpentinites,and anisotropy in subduction zones

Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic V_P/V_S ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. V_P varies between 8.9 km s^? 1 and 5.6 km s^? 1 (46% anisotropy), and 8.3 km s^? 1 and 5.8 km s^? 1 (37%), and V_S between 5.1 km s^? 1 and 2.5 km s^? 1 (66%), and 4.7 km s^? 1 and 2.9 km s^? 1 (50%) for the single-crystal and aggregate, respectively. The V_P/V_S ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high V_P/V_S ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s^?1 for V_P and V_S, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.     

Modelling ice conditions in the easternmost Gulf of Finland in the Baltic Sea

To model ice conditions in the eastern Gulf of Finland, a high-resolution three-dimensional hydrodynamic model is coupled with the advanced sea-ice model HELMI (Haapala et al., 2005). To test the model in extreme situations, the ice pattern in the eastern Gulf of Finland was simulated for a mild ice winter (2007–2008) and for a moderate one (2003–2004). The reference runs were performed on the assumption that the ice in the model domain is fast ice if the sea depth is less than 10 m. Using this assumption, the ice thickness averaged over the Neva Bay (the easternmost part of the Gulf of Finland) is overestimated by the model for almost the entire wintertime in the mild winter and during the ice formation and melting periods in the moderate winter, as compared with the thickness reported in ice charts.     

Repeatability analysis of land time‐lapse seismic data: CO2CRC Otway pilot project case study

Time‐lapse seismics is the methodology of choice for remotely monitoring changes in oil/gas reservoir depletion, reservoir stimulation or CO₂ sequestration, due to good sensitivity and resolving power at depths up to several kilometres. This method is now routinely applied offshore, however, the use of time‐lapse methodology onshore is relatively rare. The main reason for this is the relatively high cost of commercial seismic acquisition on land. A widespread belief of a relatively poor repeatability of land seismic data prevents rapid growth in the number of land time‐lapse surveys. Considering that CO₂ sequestration on land is becoming a necessity, there is a great need to evaluate the feasibility of time‐lapse seismics for monitoring. Therefore, an understanding of the factors influencing repeatability of land seismics and evaluating limitations of the method is crucially important for its application in many CO₂ sequestration projects. We analyse several repeated 2D and 3D surveys acquired within the Otway CO₂ sequestration pilot project (operated by the Cooperative Research Centre for Greenhouse Technologies, CO2CRC) in Australia, in order to determine the principal limitations of land time‐lapse seismic repeatability and investigate the influence of the main factors affecting it. Our findings are that the intrinsic signal‐to‐noise ratio (S/N, signal to coherent and background noise levels) and the normalized‐root‐mean‐square (NRMS) difference are controlled by the source strength and source type. However, the post‐stack S/N ratio and corresponding NRMS residuals are controlled mainly by the data fold. For very high‐fold data, the source strength and source type are less critical.     

On the gravitation absorption hypothesis

Summary It is recommended that the data from measurements with supraconducting gravity meters be also analysed with regard to verifying the gravitation absorption hypothesis. Based on theoretical data from a3-year period, the spectrum of the assumed effect of shielding the gravitational influence of the Sun by the Earth's body on the value of the acceleration of gravity has been calculated for the tidal station Brussels (Figs 2a–e).

---

¶rt;aam aauuam ¶rt;a uu n¶rt;uaumau ma mu u nuunm n¶rt;auaumauu. a mmuu ¶rt;a a mmu nu¶rt; u nm n¶rt;naa ma auauaumau ¶rt;mu a m a uu u u mmu ¶rt; nuu mauu (u. 2a–).

     

铝钒土中有效铝和活性硅的测定

铝钒土是用来提取氧化铝的重要经济矿石，而氧化铝被冶炼为金属铝。评价铝钒土矿石的经济价值有两个重要指标：有效铝和活性硅。有效铝就是指利用模拟Bayer工艺条件下可以提出来的Al2O3的净含量。活性硅就是指在Bayer工艺条件下可以与NaOH反应的硅化物的含量。在低温Bayer冶炼工艺中，反应硅主要来源于黏土成分的溶解，随着工艺温度的提高，溶解的石英组分也会增加活性硅的含量。由于溶解的硅最后以硅铝钠方式沉淀下来，需要消耗NaOH，对成本有很大影响，所以活性硅的含量是铝矾土的重要指标。     

HPA—S高温高压消解铂族金属

铂族金属元素（Pt、Pd、Ir、Rh、Ru、Os）在很多重要的领域中被广泛地应用。如被用作汽车催化剂的基本组成元素,以控制车辆排气污染;在石油行业用作精炼催化剂,并且在各类材料工艺学以及珠宝行业大量被使用。     

塔克拉玛干沙漠石油公路沿线风沙活动的气候环境

塔克拉玛干沙漠石油公路沿线风沙活动是由塔木盆地内热能释放与冷空气入侵相互作用的结果。冷期,盆地内冷高压逆温作用较强,地面热能不足,使得风力和风沙活动强度弱;暖期,盆地内热源剧增,每当热能源饱和遇到冷空气入侵诱导,导致了强风及强风沙活动天气。可见,区内风沙活动及风成景观的塑造过程,主要是在暖干期进行的。