High resolution facies record on late Holocene flood plain sediments from lower reaches of Narmada Valley,Western India

A high resolution quantitative granulometric record for site Uchediya [21°43′2.22″ N, 73° 6′26.22″ E; 10 m a. s. l.] gives understanding towards accretion history of the late Holocene flood plain in the lower reaches of Narmada River. Two sediment facies (sandy and muddy) and seven subfacies (sandy subfacies: St_MS+FS+CS, Sm_FS+MS, Sl_FS+VFS, and St_{MS + CS}; muddy subfacies: Fm_SILT+VFS+FS, Fm_SILT+VFS (O) and Fm_SILT+VFS (T)) are identified based on cluster analysis supplemented with sedimentary structures observed in field and other laboratory data. Changes in hydrodynamics are further deduced based on various sedimentological parameters and their ratios leading to arrive at a depositional model.     

Oxygen and organic carbon fluxes in sediments of the Bay of Biscay

The relationship between particulate organic carbon (POC) concentrations measured in modern sediment and fluxes of exported POC to the sediment surface needs to be understood in order to use POC content as a proxy of paleo-environmental conditions. The objective of our study was to compare POC concentrations, POC mineralization rates calculated from O₂ consumption and POC burial rates. Benthic O₂ distributions were determined in 58 fine-grained sediment cores collected at different periods at 14 stations in the southeastern part of the Bay of Biscay with depths ranging from 140 to 2800 m. Depth-dependent volume-specific oxygen consumption rates were used to assess rates of aerobic oxidation of organic matter (OM), assuming that O₂ consumption solely was related to heterotrophic activity at the sediment–water interface. Heterogeneity of benthic O₂ fluxes denoted changes in time and space of fresh organic material sedimentation. The most labile fraction of exported POC engendered a steep decrease in concentration in the upper 5 mm of vertical O₂ profiles. The rupture in the gradient of O₂ microprofile may be related to the bioturbation-induced mixing depth of fast-decaying carbon. Average diffusive O₂ fluxes showed that this fast-decaying OM flux was much higher than buried POC, although diffusive O₂ fluxes underestimated the total sediment oxygen demand, and thus the fast-decaying OM flux to the sediment surface. Sedimentary POC burial was calculated from sediment mass accumulation rate and the organic carbon content measured at the top of the sediment. The proportion of buried POC relative to total exported POC ranged at the most between 50% and 10%, depending on station location. Therefore, for a narrow geographic area like the Bay of Biscay, burial efficiency of POC was variable. A fraction of buried POC consisted of slow-decaying OM that was mineralized within the upper decimetres of sediment through oxic and anoxic processes. This fraction was deduced from the decrease with depth in POC concentration. At sites located below 500 m water depth, where the fast-decaying carbon did not reach the anoxic sediment, the slow-decaying pool may control the O₂ penetration depth. Only refractory organic material was fossilized in sedimentary records at locations where labile OM did not reach the anoxic portion of the sediment.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Comparison of Two Methods Used to Model Shape Parameters of Pareto Distributions

Two methods are compared for estimating the shape parameters of Pareto field-size (or pool-size) distributions for petroleum resource assessment. Both methods assume mature exploration in which most of the larger fields have been discovered. Both methods use the sizes of larger discovered fields to estimate the numbers and sizes of smaller fields: (1) the tail-truncated method uses a plot of field size versus size rank, and (2) the log–geometric method uses data binned in field-size classes and the ratios of adjacent bin counts. Simulation experiments were conducted using discovered oil and gas pool-size distributions from four petroleum systems in Alberta, Canada and using Pareto distributions generated by Monte Carlo simulation. The estimates of the shape parameters of the Pareto distributions, calculated by both the tail-truncated and log–geometric methods, generally stabilize where discovered pool numbers are greater than 100. However, with fewer than 100 discoveries, these estimates can vary greatly with each new discovery. The estimated shape parameters of the tail-truncated method are more stable and larger than those of the log–geometric method where the number of discovered pools is more than 100. Both methods, however, tend to underestimate the shape parameter. Monte Carlo simulation was also used to create sequences of discovered pool sizes by sampling from a Pareto distribution with a discovery process model using a defined exploration efficiency (in order to show how biased the sampling was in favor of larger fields being discovered first). A higher (more biased) exploration efficiency gives better estimates of the Pareto shape parameters.     

Pockmarks in the inner Oslofjord,Norway

Multibeam bathymetric surveys of the Inner Oslofjord, Norway have revealed a high density of pockmarks in the 179-km² inner fjord area, which contains over 500 pockmarks of varying size, typically 20–50 m in diameter and 2–10 m deep. These pockmarks have been investigated with a variety of techniques, including acoustic subbottom profiling, sedimentological and geochemical analyses of cores, remotely operated vehicle observation, and morphometry. Both the distribution and shapes of the pockmarks suggest that they are related to structures in the bedrock underlying relatively thin (<50 m) unconsolidated glacial and postglacial sediments. The data provide no direct indication of a particular mode of pockmark formation, but release of large amounts of biogenic, shallow methane seems unlikely. Several lines of evidence point to a continuous process of pockmark formation followed by inactivity, with some pockmarks recently active whereas others have been inactive for a considerable time. Some pockmarks are characterised by coarse sediment in their centres. The density, variety and easy access make this pockmark field an ideal model area for pockmark research. John S. Gray is deceased.     

Fishing for diatoms: fish gut analysis reveals water quality changes over a 75-year period

Defining the reference state of some perturbed streams and rivers is challenging since their non-altered state is undocumented. Despite the near-absence of pristine sites in highly anthropogenic areas, information about aquatic communities that existed prior to human disturbance can be obtained from historic sources. Sediment coring is commonly used in paleolimnology to estimate past environmental conditions of lakes, but this technique is often not appropriate for studies of lotic systems. An alternative is to use diatom assemblages present in the guts of fish that were captured in the streams prior to significant human disturbance. The purpose of the present study was to evaluate the biological integrity of several streams in Ontario and Québec during the early twentieth century based on “paleo” diatom assemblages extracted from the guts of fish stored in museums. The Eastern Canadian diatom index (IDEC: Indice Diatomées de l’Est du Canada) was used to evaluate the biological status of “paleo” and “modern” diatom assemblages. The IDEC shows the position of diatom assemblages on a general pollution gradient. The comparison of IDEC values calculated for the 1925–1948 and the 2003–2007 periods showed that several streams were severely polluted in the early 1900s. In general, present water quality has declined compared to the early 1900s. The biological integrity of only three of the 22 sites has increased. IDEC values were not influenced by the species of fish studied.     

Ensemble clustering for efficient robust optimization of naturally fractured reservoirs

In the development of naturally fractured reservoirs (NFRs), the existence of natural fractures induces severe fingering and breakthrough. To manage the flooding process and improve the ultimate recovery, we propose a numerical workflow to generate optimal production schedules for smart wells, in which the inflow control valve (ICV) settings can be controlled individually. To properly consider the uncertainty introduced by randomly distributed natural fractures, the robust optimization would require a large ensemble size and it would be computationally demanding. In this work, a hierarchical clustering method is proposed to select representative models for the robust optimization in order to avoid redundant simulation runs and improve the efficiency of the robust optimization. By reducing the full ensemble of models into a small subset ensemble, the efficiency of the robust optimization algorithm is significantly improved. The robust optimization is performed using the StoSAG scheme to find the optimal well controls that maximize the net-present-value (NPV) of the NFR’s development. Due to the discrete property of a natural fracture field, traditional feature extraction methods such as model-parameter-based clustering may not be directly applicable. Therefore, two different kinds of clustering-based optimization methods, a state-based (e.g., s _w profiles) clustering and a response-based (e.g., production rates) clustering, are proposed and compared. The computational results show that the robust clustering optimization could increase the computational efficiency significantly without sacrificing much expected NPV of the robust optimization. Moreover, the performance of different clustering algorithms varies widely in correspondence to different selections of clustering features. By properly extracting model features, the clustered subset could adequately represent the uncertainty of the full ensemble.     

Progress in China’s sustainable development research: Contribution of Chinese geographers

Sustainable development has always been a hotspot in Chinese geographical research. Herein, we conduct a systematic statistical analysis of the contribution of Chinese geographers to sustainable development research using bibliometric methods. Based on the review of a vast amount of literature, we identify the main research teams, research funding sources, journals, and key research fields. The findings are as follows: (1) the resources and environmental institutes of the Chinese Academy of Sciences have a significant influence on sustainable development research; (2) China’s central government foundations (the National Natural Science Foundation of China and National Social Sciences Fund) are the main research funding sources; (3) most of the highly cited articles are published in journals sponsored by the Geographical Society of China; and (4) sustainable development theory and its research areas are being constantly enriched and perfected. Based on the statistics of keywords, the theory, research methods, research regional scales, and key research areas are summarized and expounded.     

Evaluation of Subsurface Lithologic Units for Groundwater Exploration in the Barind Tract of Bangladesh

Barind Tract, located north western part of Bangladesh, is one of the most diversified physiographic units of the country. The surface water supply in this part is particularly limited, so the irrigation is almost entirely depends on groundwater. However, over exploitation indicates falling groundwater heads in this area. The objective of present study is to examine the nature of the aquifer system Barind Tract of Bangladesh in order to assess the sustainability of groundwater yield. Borehole lithology data were collected, processed and analyzed for this purpose. Representative panel diagram, 3-D stratigraphic and cross-sectional views were also prepared for necessary assessment of the variation of individual subsurface stratum in different locations. The study identified three subsurface geologic formations namely, a top clay layer, sand layer of different grain size and at the bottom an impermeable clay zone. Maps of formation thickness and index revealed that aquifer thickness is low in the north-western corner and in some places of middle of south-western corner. The thickness of sand formation in other places is recorded above 20 m. It is expect that the finding of the study will help groundwater resources development, planning and management in the area.     

Heavy metal contamination of cultivated wetland soils along a typical plateau lake from southwest China

Topsoil (0–20 cm) samples were collected from four cultivated wetlands including Northern and Western Fields (about 30-year tillage), and Southern and Western Fields (about 20-year tillage) along the Yilong Lake of China in October, 2005. Total concentrations of As, Cr, Cu, Pb, and Zn were determined using the inductively coupled plasma atomic absorption spectrometry in order to assess contamination status in four sampling plots. Results showed that the average concentrations of these heavy metals in Northern and Western Fields were significantly (P < 0.01) higher than those in reference soils, while they were generally lower in Southern and Eastern Fields. All the mean concentrations of heavy metals were lower, except that the average concentrations of As and Cr in Northern Field slightly exceeded the soil quality guidelines. The contamination indices showed low-contamination levels for As, Cu, Pb, and Zn in Northern and Western Fields, while no contamination levels could be observed in Southern and Eastern Fields. As for Cr, they showed moderate-contamination levels in Northern Field, but low or no contamination levels in other three Fields. The integrated contamination index values indicated Northern and Western Fields were moderately contaminated, while Southern and Eastern Fields were less contaminated. The same contamination sources of these heavy metals were identified in these fields using factor- and cluster analysis.