Large debris avalanches and associated eruptions in the Holocene eruptive history of Shiveluch Volcano, Kamchatka, Russia

 Shiveluch Volcano, located in the Central Kamchatka Depression, has experienced multiple flank failures during its lifetime, most recently in 1964. The overlapping deposits of at least 13 large Holocene debris avalanches cover an area of approximately 200 km² of the southern sector of the volcano. Deposits of two debris avalanches associated with flank extrusive domes are, in addition, located on its western slope. The maximum travel distance of individual Holocene avalanches exceeds 20 km, and their volumes reach ∼3 km³. The deposits of most avalanches typically have a hummocky surface, are poorly sorted and graded, and contain angular heterogeneous rock fragments of various sizes surrounded by coarse to fine matrix. The deposits differ in color, indicating different sources on the edifice. Tephrochronological and radiocarbon dating of the avalanches shows that the first large Holocene avalanches were emplaced approximately 4530–4350 BC. From ∼2490 BC at least 13 avalanches occurred after intervals of 30–900 years. Six large avalanches were emplaced between 120 and 970 AD, with recurrence intervals of 30–340 years. All the debris avalanches were followed by eruptions that produced various types of pyroclastic deposits. Features of some surge deposits suggest that they might have originated as a result of directed blasts triggered by rockslides. Most avalanche deposits are composed of fresh andesitic rocks of extrusive domes, so the avalanches might have resulted from the high magma supply rate and the repetitive formation of the domes. No trace of the 1854 summit failure mentioned in historical records has been found beyond 8 km from the crater; perhaps witnesses exaggerated or misinterpreted the events. Received: 18 August 1997 / Accepted: 19 December 1997     

Late Cretaceous planktonic foraminifera from Kerguelen Plateau (ODP Leg 183): new data to improve the Southern Ocean biozonation

An almost complete Upper Cretaceous sedimentary sequence recently recovered on the Kerguelen Plateau (southern Indian Ocean) during ODP Leg 183 was analysed for planktonic foraminifera in order to refine and integrate the zonal schemes previously proposed for the Southern Ocean area. Detailed biostratigraphic analysis carried out on holes 1135A, 1136A and 1138A (poleward of 50°S palaeolatitude during Late Cretaceous time) has allowed recognition of low and mid–high latitude bioevents, useful for correlation across latitudes, in addition to known Austral bioevents. The low latitude biozonation can be applied to Turonian sediments, because of the occurrence of Helvetoglobotruncana helvetica, which marks the boundary between Whiteinella archaeocretacea and Helvetoglobotruncana helvetica zones. The base of the Whiteinella archeocretacea Zone falls within the uppermost Cenomanian–Turonian black shale level in Hole 1138A. The stratigraphic interval from upper Turonian to uppermost Santonian can be resolved using bioevents recognized in the mid–high latitude sections. They are, in stratigraphic order: the last occurrence of Falsotruncana maslakovae in the Coniacian, the first occurrence of Heterohelix papula at the Coniacian/Santonian boundary, the extinction of the marginotruncanids in the late Santonian, and the first occurrence of Globigerinelloides impensus in the latest (?) Santonian. The remainder of the Late Cretaceous fits rather well in the Austral zonal scheme, except that Globigerinelloides impensus exhibits a stratigraphic range in agreement with its record at the mid–high latitude sections and extends further downwards than previously recorded at southern sites. Therefore, despite the poor recovery in certain intervals and the presence of several hiatuses of local and regional importance as revealed by correlation among holes, a more detailed zonal scheme has been obtained (mainly for the less resolved Turonian–Santonian interval). Remarks on some species often overlooked in literature are also provided.     

Petroleum-related hydrocarbons in deep and subsurface sediments from South-Western Barents Sea

Subsurface sediments from a pockmark area in South-Western Barents Sea have been earlier found to contain elevated levels of petroleum-related polycyclic aromatic hydrocarbons. This work describes a comprehensive analysis of various biomarkers, including the highly source-specific hopanes, in a 4.5?m long gravity core from the same area, together with subsurface sediment samples from other areas in the region without pockmarks present ("background samples"). A clear difference between the pockmark gravity core and the background sediment cores was found, both with regard to genesis and the level of transformation of organic matter. A number of indicator parameters, such as methylphenanthrene index (MPI-1), point towards a significantly higher maturity of hydrocarbons in the pockmark core throughout its length as compared to the other sampled locations. Higher contents of microbial hopanoids (hopenes) may indicate the former presence of petroleum. These findings confirm the hypothesis of a natural hydrocarbon source in the deeper strata present in the studied location with pockmarks.     

V2213 Cyg is a New W Uma-Type System

V2213 Cyg was discovered as a variable star by Pavlenko (1999) in 1998. We present our photometry of V2213 Cyg from 1998–2003 based on CCD observations with the K-380 Cassegrain telescope of CrAO and the 60 cm Zeiss telescope of SAI. Observations have been carried out mostly in R and sometimes in B and V Johnson system. The total amount of data is 2270 points, covering ∼50 nights. We classify this binary as a W UMa-type contact system. Using all data we determined the orbital period to be 0.350079 ± 0.000007 day. The mean brightness varies between R = 14.35 and 14.05. The mean 1999–2003 orbital light curve has two humps and a primary minimum (I), which is 0.04 mag brighter than the deeper secondary one (II). The mean humps have slightly different height. The difference between two individual maxima varies within 0.1 mag, which may indicate an activity of the components. The highest hump is an asymmetrical one: it has sort of a shoulder at phases 0.75–0.80, before entering the less deep primary minimum (phase 0.0). The system is rather reddened, its colour indices are: B−V ∼ 0.8 and V−R ∼ 0.7, and give a spectral class of V2213 Cyg earlier than K.     

Polyphase thrusting and dyke emplacement in the central Southern Alps (Northern Italy)

The Triassic succession of the central Southern Alps (Italy) is stacked into several units bounded by south-verging low-angle thrust faults, which are related to two successive steps of crustal shortening. The thrust surfaces are cut by high-angle extensional and strike-slip faults, which controlled the emplacement of hypabissal magmatic intrusions that post-date thrusts motions. Intrusion ages based on SHRIMP U–Pb zircon dating span between 42 ± 1 and 39 ± 1 Ma, suggesting close time relationships with the earliest Adamello intrusion stages and, more in general, with the widespread calc-alkaline magmatism described in the Southern Alps. Fission-track ages of magmatic apatites are indistinguishable from U–Pb crystallization ages of zircons, suggesting that the intrusion occurred in country rocks already exhumed above the partial annealing zone of apatite (depth < 2–4 km). These data indicate that the central Southern Alps were already structured and largely exhumed in the Middle Eocene. Although we describe minor faults affecting magmatic bodies and local reactivations of older structures, no major internal deformations have occurred in the area after the Bartonian. Neogene deformations were instead concentrated farther south, along the frontal part of the belt.     

Mitigation of lunar dust adhesion by surface modification

Dust has been recognized as one of the greatest hazards in continued lunar exploration due to its tenacious adhesion to everything with which it comes into contact. Unfortunately, there is little known about the mechanisms of adhesion on widely varying surface types: van der Waals and electrostatic forces are the dominant forces under consideration here. Surface energy, roughness, mechanical properties and electronic properties are all known to contribute to the adhesion characteristics. An optimal solution to mitigate dust adhesion would be to identify the dominant components of the adhesive force and to reduce that force by surface modification. In this study, an ion beam process was used to modify (treat) the surfaces of three dramatically different materials spanning the range of conductor (black Kapton), semiconductor (silicon), and insulator (quartz). Adhesive forces between less than JSC-1 lunar simulants and these virgin/treated surfaces were measured in vacuum using a centrifugal force detachment method. We found that JSC-1 particles adhered less to treated silicon and quartz surfaces, correlated with a reduction in van der Waals force due to a reduced surface energy. The large reduction in adhesion for treated black Kapton is mainly due to the large decrease in the electrostatic (image) force that results from reduced contact charging. Materials in space and on the lunar surface will be directly exposed to high-energy ultraviolet radiation prior to being covered by dust, so the UV irradiation effects on surface adhesion were also examined. Both virgin and treated quartz surfaces are most affected by the UV-irradiation, showing dramatically increased adhesion.     

Measurement of the radius of Mercury by radio occultation during the MESSENGER flybys

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft completed three flybys of Mercury in 2008–2009. During the first and third of those flybys, MESSENGER passed behind the planet from the perspective of Earth, occulting the radio-frequency (RF) transmissions. The occultation start and end times, recovered with 0.1 s accuracy or better by fitting edge-diffraction patterns to the RF power history, are used to estimate Mercury's radius at the tangent point of the RF path. To relate the measured radius to the planet shape, we evaluate local topography using images to identify the high-elevation feature that defines the RF path or using altimeter data to quantify surface roughness. Radius measurements are accurate to 150 m, and uncertainty in the average radius of the surrounding terrain, after adjustments are made from the local high at the tangent point of the RF path, is 350 m. The results are consistent with Mercury's equatorial shape as inferred from observations by the Mercury Laser Altimeter and ground-based radar. The three independent estimates of radius from occultation events collectively yield a mean radius for Mercury of 2439.2±0.5 km.     

Integration error over very long time spans

The main limit to the time span of a numerical integration of the planetary orbits is no longer set by the availability of computer resources, but rather by the accumulation of the integration error. By the latter we mean the difference between the computed orbit and the dynamical behaviour of the real physical system, whatever the causes. The analysis of these causes requires an interdisciplinary effort: there are physical model and parameters errors, algorithm and discretisation errors, rounding off errors and reliability problems in the computer hardware and system software, as well as instabilities in the dynamical system. We list all the sources of integration error we are aware of and discuss their relevance in determining the present limit to the time span of a meaningful integration of the orbit of the planets. At present this limit is of the order of 10⁸ years for the outer planets. We discuss in more detail the truncation error of multistep algorithms (when applied to eccentric orbits), the coefficient error, the method of Encke and the associated coordinate change error, the procedures used to test the numerical integration software and their limitations. Many problems remain open, including the one of a realistic statistical model of the rounding off error; at present, the latter can only be described by a semiempirical model based upon the simpleN ² formula (N=number of steps, =machine accuracy), with an unknown numerical coefficient which is determined only a posteriori.     

Chemical and biological features of the saline Lake Krasnovishnevoye (Baraba,Russia) in comparison with Lake Malinovoe (Kulunda,Russia): a reconnaissance study

The Baraba and Kulunda steppes are located in southwestern Siberia in an area with an arid continental climate. This paper presents results of the first study of the hypersaline Lake Krasnovishnevoye(Baraba steppe, TDS(total dissolved solids)=297 g/L, pH 7.88). The major chemical, mineralogical and biological features of the lake were studied and compared to those of Lake Malinovoe, a typical saline neutral lake of Kulunda steppe(TDS=396 g/L, pH 7.63). The phytoplankton composition and the culturable diversity of anoxygenic phototrophic bacteria from Lake Krasnovishnevoye correspond to the ones in the Kulunda lakes. Nevertheless, the peculiarities of water composition and regime of Lake Krasnovishnevoye reduce the biodiversity to prokaryotes and unicellular algae.     

The Scale of VGI in Map Production: A Perspective on European National Mapping Agencies

The perspective of European National Mapping Agencies (NMA) on the role of citizen sensing in map production was explored. The NMAs varied greatly in their engagement with the community generating volunteered geographic information (VGI) and in their future plans. From an assessment of NMA standard practices, it was evident that much VGI was acquired with a positional accuracy that, while less than that typically acquired by NMAs, actually exceeded the requirements of the nominal data capture scale used by most NMAs. Opportunities for VGI use in map revision and updating were evident, especially for agencies that use a continuous rather than cyclical updating policy. Some NMAs had also developed systems to engage with citizen sensors and examples are discussed. Only rarely was VGI used to collect data on features beyond the standard set used by the NMAs. The potential role of citizen sensing and so its current scale of use by NMAs is limited by a series of concerns, notably relating to issues of data quality, the nature and motivation of the contributors, legal issues, the sustainability of data source, and employment fears of NMA staff. Possible priorities for future research and development are identified to help ensure that the potential of VGI in mapping is realized.