Mycobiota of the disused ore mine of Marcinków in?nie?nik Masiff(western Poland)

Marcinków(Lower Silesia, ?nie?nik Masiff,south-western Poland) has been a well-known mining centre since the mid-15 th century. Mineral extraction ended in 1949 with the ores of Pb, Ag, Cu and occasionally Au, U or graphite mined there. The mine is surrounded by metamorphic graphite and mica schist. It is not open to the public and no bats have been recorded living in. The aim of this study was the mycological analysis of the air, the rock surface and the water of the disused ore mine of Marcinków.Additionally, the chemical composition of rocks and water, and microclimate conditions of the adit were determined. Fungi were identified using a combination of phenotypic and molecular methods.Six taxa of fungi were cultured from the indoor air samples of the adit, whereas the outdoor air samples contained only five taxa. On the other hand, nine taxa were isolated from both the rocky walls and the water.The Aspergillus group was present only on the rocks and in the water, whereas Cladosporium herbarum,Dumontinia tuberosa, Epicoccum nigrum, Hirsutella sp., were found exclusively in the air. The mycobiota found in the ore mine were mostly similar to those recorded in other mines and natural caves. However,it should be noted that the internal microclimate and chemical compounds of the rocks.     

Asian dust depositions over the Asian region during March 2010 estimated by ADAM2

The Asian Dust Aerosol Model 2 with the MM5 meteorological model has been employed to estimate the dust emission, dust concentration, and wet and dry deposition of dust in the Asian region for the month of March in 2010. It is found that the model simulates quite reasonably the dust (PM₁₀) concentrations both in the dust source region and the downstream region of Korea. The starting and ending times of most dust events and their peak concentration occurrence times are well simulated. The monthly mean maximum surface dust concentration (PM₁₀) is found to be 267???g?m^?3 in the domain of central northern China (CNC). Monthly total maximum dust emission of more than 32?t km^?2 and that of deposition of more than 25.4?t km^?2 (dry deposition of 24?t km^?2 and wet deposition of 1.4?t km^?2) are found to occur in the domain CNC, whereas the monthly mean minimum surface dust concentration (PM₁₀) is found to be 0.2???g?m^?3 in the domain of the Tibetan Plateau, where the monthly total dust emission (4?kg?km^?2) and the monthly total dust deposition (9?kg?km^?2) are found to be minimum. This monthly total dust deposition of 9?kg?km^?2 (dry deposition of 7?kg?km^?2 and wet deposition of 2?kg?km^?2) is as large as 2.25 times of that of emission (4?kg?km^?2), suggesting net dust influx toward the Tibetan Plateau from the surrounding dust source regions. It is also found that the ratio of the total dust deposition to the total dust emission in the source region increases toward the downstream direction from 0.4 in the upstream source region of Taklimakan to 0.80 in the downstream source region of northeastern China. More than 90% of the total dust deposition is found to be contributed by dry deposition due to the lack of precipitation in the dust source region. The monthly mean dust concentration (PM₁₀) is found to decrease with distance away from the dust source region. The monthly mean dust concentration of 62???g?m^?3 over the Yellow Sea (YES) decreases to 4.3???g?m^?3 over the Northwestern Pacific Ocean (NWP). The monthly total dust deposition in the downstream region is also found to decrease away from the source region from 2.33?t km^?2 (dry deposition of 1.36?t km^?2 and wet deposition of 0.97?t km^?2) over the domain YES to 1.45?t km^?2 (dry deposition of 0.16?t km^?2 and wet deposition of 1.30?t km^?2) over the domain NWP. A large amount of the total dust deposition over the seas is contributed by wet deposition (more than 90%), causing a small decreasing rate of the total dust deposition with distance from the source region. The estimated dust deposition could adversely impact the eco-environmental system significantly in the downstream regions of the Asian dust source region, especially over the seas.     

A simulation of Asian dust events observed from 20 to 29 December 2009 in Korea by using ADAM2

The Asian dust Aerosol Model 2 (ADAM2) with the MM5 meteorological model has been employed to study long-range transport process of Asian dust and to estimate dust emission, deposition (wet and dry) and concentration over the Asian dust source region and the downwind regions for dust events observed in Korea during the period of 20–29 December 2009, which is one of the dust events chosen by the 3^rd Meeting of Working Group for Joint Research on Dust Sand Storm among Mongolia, China, Japan and Korea to study intensively for the development of an early warning system in Asia. It is found that the model simulates quite well the starting and ending times of dust events and the peak dust concentrations with their occurrence times both in the source region and downwind regions. The dust emission in the dust source region is found to be associated with a developing synoptic weather system accompanied with strong surface winds over the source region that usually travels east to southeastward across the source region and then turns to move northeastward toward the north western Pacific Ocean. The dust emitted in the source region is found to be split into two parts: one is transported southeastward to the East China Sea in front of the surface high pressure system and experiencing enhanced deposition due to the sinking motion induced by the southeastward traveling the surface high pressure system whereas, the other moves northeastward toward the surface low pressure system and then lifted upward to form a upper-level high dust concentration layer that results in a favorable condition for the long-range transport of dust. It is also found that the maximum ten-day total dust emission of about 23 t km^?2 occurs in the domain Northwestern China (NWC). However, the maximum ten-day total dust deposition of 21 t km^?2 with the maximum mean surface concentration of 555 μg m^?3 and the column integrated mean concentration of 2.9 g m^?2 occurs in the domain Central-northern China (CNC). The column-integrated PM₁₀ concentration is found to increase toward northeastward especially in the domain North northeastern China (NNEC) due to the upper-level transported high PM₁₀ concentration. The ten-day total dust deposition, mean surface PM₁₀ and column integrated PM₁₀ concentrations in the downwind domains are found to decrease away from the source region from 2.44 t km^?2, 112 μg m^?3 and 1.68 g m^?2, respectively in the domain YES to 0.06 t km^?2, 2.1 μg m^?3 and 0.4 g m^?2, respectively in the domain Northwestern Pacific 1 (NWP1). Much of the total dust deposition is largely contributed by wet deposition in the far downwind region of the seas while that is contributed by dry deposition in the source region.     

Momentum and Sensible Heat Exchange in an Ice-Free Arctic Fjord

Momentum and sensible heat exchange are studied in an Arctic fjord system in Spitsbergen, Svalbard (Norway), based on tower measurements taken in January–June 2008. Due to ice-free conditions, the surface layer was unstable for most of the time, occasionally very unstable. The shape of the fjord and the surrounding topography have a large influence on the wind field. Low frequency eddies are mainly responsible for occasionally large crosswind momentum transfer that, together with upward momentum transfer (occurring in 9% of the data), invalidate conventional stability and scaling parameters. When the flow is along the fjord with moderate or high wind speeds, the Monin–Obukhov similarity theory is applicable. However, the momentum and the sensible heat exchange in the fjord system differs from the exchange taking place over the open ocean, mainly due to topographic effects.     

Tremolite–calcite veins in the footwall of the Simplon Fault,Antigorio Valley,Lepontine Alps (Italy)

The lowermost units of the nappe pile of the Lepontine Alps crop out in the Antigorio valley in the footwall of the Simplon Fault. The whole orthogneiss section of the Antigorio Unit is exposed on both sides of the valley, sandwiched between the Mesozoic metasedimentary sequences of the Baceno unit below and the Tèggiolo unit above. The petrography and mineral composition of tremolite–calcite veins occurring in dolomite marble in both metasedimentary sequences were investigated. Tremolite–calcite (with lesser talc and minor phlogopite) veins have rhythmic banded texture. Banding is due to cyclic differences in modal abundances and fabric of tremolite and calcite. These veins are very similar to those occurring in dolomite rafts within the Bergell granite and it is inferred that they formed by the same “fracture-reaction-seal” mechanism. Veins formed by reaction of a silica-rich aqueous fluid with the host dolomite marble along fractures. According to thermo-barometric calculations, based on electron microprobe analyses, reaction occurred at temperatures between 450 and 490°C and minimum pressure of 2–3 kbar. Such temperature conditions occurred in this footwall region of the Simplon Fault Zone around 15 Ma, during exhumation and cooling of the nappe pile and a transition to brittle behaviour. Aqueous, silica-rich fluids concentrated along fractures, forming tremolite–calcite veins in the dolomite marbles and quartz veins in the orthogneiss.     

四川盆地奥陶系岩相古地理与勘探潜力

在前人研究基础上,依托露头和钻井资料,以沉积相分析为核心,结合四川盆地构造演化,采用单因素分析多因素综合法,以"组"为单元编制了奥陶纪岩相古地理图。奥陶纪四川盆地及邻区总体呈现西高东低的古地理格局,自西向东发育滨岸相、混积潮坪相、局限台地相、开阔台地相和斜坡相—盆地相。从岩相古地理视角对成藏条件的分析表明:奥陶系五峰组沉积期四川盆地主体属于局限海环境,发育了一套优质烃源岩,此外,与奥陶系临近的上覆志留系龙马溪组和下伏寒武系筇竹寺组烃源岩在有断层沟通的情况下可提供有效气源;奥陶系碳酸盐岩总体致密,白云石化、表生溶蚀和裂缝的存在是储层形成的关键因素,对应发育了桐梓组—红花园组颗粒滩白云岩储层、岩溶储层和宝塔组裂缝储层等三类储层;奥陶系发育下部(下生上储)和上部(上生下储)两套成藏组合,具有较好的勘探潜力。     

How well can we simulate complex hydro‐geomorphic process chains? The 2012 multi‐lake outburst flood in the Santa Cruz Valley (Cordillera Blanca,Perú)

Changing high‐mountain environments are characterized by destabilizing ice, rock or debris slopes connected to evolving glacial lakes. Such configurations may lead to potentially devastating sequences of mass movements (process chains or cascades). Computer simulations are supposed to assist in anticipating the possible consequences of such phenomena in order to reduce the losses. The present study explores the potential of the novel computational tool r.avaflow for simulating complex process chains. r.avaflow employs an enhanced version of the Pudasaini ( 2012 ) general two‐phase mass flow model, allowing consideration of the interactions between solid and fluid components of the flow. We back‐calculate an event that occurred in 2012 when a landslide from a moraine slope triggered a multi‐lake outburst flood in the Artizón and Santa Cruz valleys, Cordillera Blanca, Peru, involving four lakes and a substantial amount of entrained debris along the path. The documented and reconstructed flow patterns are reproduced in a largely satisfactory way in the sense of empirical adequacy. However, small variations in the uncertain parameters can fundamentally influence the behaviour of the process chain through threshold effects and positive feedbacks. Forward simulations of possible future cascading events will rely on more comprehensive case and parameter studies, but particularly on the development of appropriate strategies for decision‐making based on uncertain simulation results. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

山地灾害沉积物的测年综述

山地灾害事件发生的年代是理解其发育机制并作出预测的基础.在长时间尺度上,常用的测牟方法有光释光、14C、宇宙成因核素和火山灰测年等,其中的关键是能否在剖面中寻找到合适的测年物质.短时间尺度的测年方法以树轮为主,辅以地衣测年.在山地灾害中,不仅灾害沉积本身,其相关沉积物对事件年代也具有指示意义.在实际应用中,根据测年材料...     

Changes in bark properties and hydrology following prescribed fire in Pinus taeda and Quercus montana

In the eastern United States, the use of prescribed fire as a silvicultural technique to manage for desirable upland tree species is increasing in popularity. Bark physical properties such as thickness, density, and porosity have known associations with fire tolerance among species. These physical properties simultaneously influence rainfall interception and canopy storage and thus are of interest across a range of disciplines. Furthermore, while these characteristics are innate to a species, it is unknown whether repeated exposure to fire facilitates physical change in bark structure and whether these changes are consistent among species. To answer these questions, bark samples were collected from mature pine (Pinus taeda L.) and oak (Quercus montana Willd.) trees from sites across the Bankhead National Forest in Alabama, USA under three different burn regimes: 3-year cycle, 9-year cycle, and no fire. Samples were analysed in the laboratory for bulk density, porosity, water storage capacity, and hygroscopicity (the amount of atmospheric water vapour absorbed by bark during non-rainfall conditions). Drying rates of saturated samples under simulated wetting conditions were also assessed. Oak bark had higher bulk density, lower porosity, and dried slower than pine bark. Interestingly, bark from both species had lower bulk density, higher porosity, greater water storage capacity, and dried faster in stands that were burned every 3 years compared to other fire regimes (p < 0.001). In summary, this study demonstrates that prescribed fire regimes in an eastern US forest alter bark structure and thus influence individual tree control on hydrological processes. The increase in bark water storage capacity, coupled with faster bark evaporation times may lead to less water inputs to the forest floor and drier overall conditions. Further investigation of this fire-bark-water feedback loop is necessary to understand the extent of these mechanisms controlling landscape-scale conditions.     

Insights into Holocene relative sea-level changes in the southern North Sea using an improved microfauna-based transfer function

In light of global warming and rising relative sea level (RSL), detailed reconstructions of RSL histories and their controlling processes are essential in order to manage coastal-protection challenges. This study contributes to unravelling Holocene RSL change on the East Frisian North Sea coast in high resolution and with a new approach for the German Bight. For the first time, a transfer function (vertical error: 29.7 cm ? ~11% of the mean tidal range) for RSL change based on a combined training set of benthic foraminifers and ostracods from the back-barrier tidal basin of Spiekeroog is applied to the Holocene record of the back-barrier tidal basin of Norderney. The resulting RSL curve for the Norderney tidal basin is corrected for decompaction and shows a deceleration in RSL rise between 6000 and 5000 cal bp. The smallest possible error envelope (~1 m) results from the good suitability of salt-marsh layers between 5000 and 4000 cal bp. The RSL curve provides an approach towards the closure of the common data gap of peat-based curves for the southern North Sea related to a lack of basal peats in the youngest age range, and verifies regional differences in glacial isostatic adjustment.