Effects of pollen leaching and microbial degradation on organic carbon and nutrient availability in lake water

Nutrient fluxes across terrestrial-aquatic boundaries and their subsequent integration into lake nutrient cycles are currently a major topic of aquatic research. Although pollen represents a good substrate for microorganisms, it has been neglected as a terrestrial source of organic matter in lakes. In laboratory experiments, we incubated pollen grains of Pinus sylvestris in water of lakes with different trophy and pH to estimate effects of pollen input and its subsequent microbial degradation on nutrient dynamics. In this ex situ experiment, we measured concentrations of organic carbon, phosphorus and nitrogen in the surrounding water as well as microbial dynamics (bacteria and fungal sporangia) at well-controlled conditions. Besides leaching, chemical and microbial decomposition of pollen was strongest within the first week of incubation. This led to a marked increase of soluble reactive phosphorus and total dissolved nitrogen (up to 0.04 and 1.5 mg L⁻¹, respectively, after 5 days of incubation) in the ambient water. In parallel, pollen grains were rapidly colonized by heterotrophic bacteria and aquatic fungi. Leaching and microbial degradation of pollen accounted for ≥80, ≥40, ≥50% for organic C, N and P, respectively, and did not significantly differ among water samples from the studied lakes. Thus, pollen introduces high amounts of bio-available terrestrial organic matter and nutrients into surface waters within a short time. A rough calculation on P input into oligotrophic Lake Stechlin indicates that pollen plays an important ecological role in nutrient cycling of temperate lakes. This requires further attention in aquatic ecology.     

Statistical identification of orographic effects in the regional analysis of extreme rainfall

Regional models of extreme rainfall must address the spatial variability induced by orographic obstacles. However, the proper detection of orographic effects often depends on the availability of a well‐designed rain gauge network. The aim of this study is to investigate a new method for identifying and characterizing the effects of orography on the spatial structure of extreme rainfall at the regional scale, including where rainfall data are lacking or fail to describe rainfall features thoroughly. We analyse the annual maxima of daily rainfall data in the Campania region, an orographically complex region in Southern Italy, and introduce a statistical procedure to identify spatial outliers in a low order statistic (namely the mean). The locations of these outliers are then compared with a pattern of orographic objects that has been a priori identified through the application of an automatic geomorphological procedure. The results show a direct and clear link between a particular set of orographic objects and a local increase in the spatial variability of extreme rainfall. This analysis allowed us to objectively identify areas where orography produces enhanced variability in extreme rainfall. It has direct implications for rain gauge network design criteria and has led to promising developments in the regional analysis of extreme rainfall. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of remotely‐sensed DEMs and modification based on plausibility rules and initial sediment budgets of an artificially‐created catchment

To quantify landscape change resulting from processes of erosion and deposition and to establish spatially distributed sediment budgets, ‘models of change’ can be established from a time series of digital elevation models (DEMs). However, resolution effects and measurement errors in DEMs may propagate to these models. This study aimed to evaluate and to modify remotely‐sensed DEMs for an improved quantification of initial sediment mass changes in an artificially‐created catchment. DEMs were constructed from photogrammetry‐based, airborne (ALS) and ground‐based laser scanning (TLS) data. Regions of differing morphological characteristics and vegetation cover were delineated. Three‐dimensional (3D) models of volume change were established and mass change was derived from these models. DEMs were modified region‐by‐region for rill, interrill and alluvial areas, based on logical and hydro‐geomorphological principles. Additional DEMs were constructed by combining multi‐source, modified data. Models were evaluated by comparison with d‐GPS reference data and by considering sediment budget plausibility. Comprehensive evaluation showed that DEM usability depends on a relation between the technique used to obtain elevation data, surface morphology and vegetation cover characteristics. Photogrammetry‐based DEMs were suited to quantification of change in interrill areas but strongly underestimated surface lowering in erosion rills. TLS DEMs were best suited to rill areas, while ALS DEMs performed best in vegetation‐covered alluvial areas. Agreement with reference data and budget plausibility were improved by modifications to photogrammetry‐ and TLS‐based DEMs. Results suggest that artefacts in DEMs can be reduced and hydro‐geomorphic surface structures can be better represented by applying region‐specific modifications. Photogrammetry‐based DEMs can be improved by combining higher and lower resolution data in defined structural units and applying modifications based on principles given by characteristic hydro‐geomorphic evolution. Results of the critical comparative evaluation of remotely‐sensed elevation data can help to better interpret DEM‐based quantifications of earth‐surface processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Dynamic response and optimal design of structures with large mass ratio TMD

This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd.     

Revised marine reservoir offset (ΔR) values for molluscs and marine mammals from Arctic North America

Appropriate marine–terrestrial reservoir offset (ΔR) values are essential for accurate calibration of marine radiocarbon dates. However, ΔR values are only valid for the specific calibration curve that their calculation is based on. Here, we present revised ΔR values for the Marine20 calibration curve from Arctic North America, based on previously published ¹⁴C dates on pre-bomb live-collected marine molluscs (n = 124) and cetaceans (beluga whales; tooth dentine; n = 12), and bowhead whale–driftwood age comparisons from the same glacio-isostatically uplifted shorelines (n = 18). Molluscan-based ΔR are: Chukchi/Beaufort sea coasts, 265±116 ¹⁴C years; NW Canadian Arctic Archipelago, 188±91 ¹⁴C years; NE Baffin Island, 81±18 ¹⁴C years; SE Baffin Island, 14±58 ¹⁴C years; Hudson Strait, −73±64 ¹⁴C years; Ungava Bay, 0±86 ¹⁴C years; Foxe Basin, 175±89 ¹⁴C years; Hudson Bay, −21±72 ¹⁴C years; James Bay, 209±114 ¹⁴C years; West Greenland, −93±111 ¹⁴C years. Species-specific marine mammal ΔR terms are 107±59 ¹⁴C years for beluga and 24±58 ¹⁴C years for bowheads. Our revised ΔR values are applicable for as long as the same broad oceanographic conditions (circulation, ventilation) have persisted, i.e. through the Holocene. While molluscan values are applicable to other marine carbonate (e.g. foraminifera), cetacean ΔR are valid only for the species they were calculated for and should not be applied to other marine mammals. Importantly, the ΔR terms calculated here are only valid for Marine20 and should not be used with earlier or later calibration curves.     

MELIMEX,an experimental heavy metal pollution study: Particle size distributions in limno-corrals

The particle size distributions in three limno-corrals, located in Baldeggersee, Switzerland, have been determined by means of a Zeiss Micro-Videomat image analyzer as a function of depth and time. The distributions were measured biweekly over a period of 1 year at depths of 0 m, 2.5 m, 5 m, 7.5 m and 10 m (=above bottom). Two of the limno-corrals were charged with heavy metals, whereas the third was uncharged and served as a reference. The shape of the distributions as well as the particle concentrations in the uncharged container did not differ from the ones in the charged limno-corrals. The distributions were found to be self-preserving and independent on heavy metal load, time, depth and particle concentrations. As an average, the dependence of the distributions on the particle diameter was found to be ?1.5 to ?2.5.     

Tsunami hazard in the Eastern Mediterranean: strong earthquakes and tsunamis in Cyprus and the Levantine Sea

A modern tsunami catalogue has been compiled for the region of Cyprus-Levantine Sea in which 24 certain or possible local tsunamis are listed from antiquity up to the present time, while six regional tsunamis, generated in the Hellenic arc, are documented which affected the region. Another set of 13 doubtful events not included in the catalogue are discussed. Tsunami intensities k and K were re-evaluated using the classic 6-grade and the new 12-grade intensity scales, respectively. The strongest tsunamis reported in the region of interest are those of 551 AD, 749, 1068, 1201, 1222, 1546 and 1759, all occurring along the Levantine coast from Gaza northward, with the exception of the 1222 wave which occurred in the Cyprean arc. The causative earthquakes, however, occur on land and are associated with the left-lateral strike-slip Levantine rift and, as such, remain unexplained. In this paper we speculate on the mechanism of these events. A second tsunami zone follows the Cyprean arc, where the situation of subaqueous seismogenic sources favours the generation of tsunamis by co-seismic fault displacements. Submarine or coastal earth slumping, however, may be an additional tsunamigenic component. Based on historical data, the average tsunami recurrence in the Cyprus-Levantine Sea region is roughly estimated to be around 30 years, 120 years and 375 years for moderate (k/K ≥ 2/3), strong (k/K ≥ 3/5) and very strong (k/K ≥ 5/8) events, respectively. The rate of tsunami occurrence equals 0.033, 8.3 × 10⁻³ and 2.7 × 10⁻³ events/year for intensity k/K ≥ 2/3, 3/5 and 5/8, respectively. For a Poissonian (random) process the probabilities of observing at least one moderate, strong or very strong tsunami are 0.28, 0.01 and 3 × 10⁻³ within 1 year, 0.81, 0.34 and 0.13 within 50 years and 0.96, 0.56 and 0.24 within 100 years, respectively. The tsunami potential in the Cyprus-Levantine Sea area is low relative to other Mediterranean tsunamigenic regions. However, the destructiveness of some historical events indicates the need to evaluate tsunami hazard by all available means. In addition, remote tsunamigenic sources, such as those of 1303 and 1481 in the eastern Hellenic arc, are able to threaten the coasts of the Cyprus-Levantine region and, therefore, such regional tsunamis should be taken into account in the evaluation of the tsunami risk of the region.     

Geochemistry of low-molecular weight hydrocarbons in hydrothermal fluids from Middle Valley, northern Juan de Fuca Ridge

Hydrothermal vent fluids from Middle Valley, a sediment-covered vent field located on the northern Juan de Fuca Ridge, were sampled in July, 2000. Eight different vents with exit temperatures of 186-281 °C were sampled from two areas of venting: the Dead Dog and ODP Mound fields. Fluids from the Dead Dog field are characterized by higher concentrations of ΣNH₃ and organic compounds (C₁-C₄ alkanes, ethene, propene, benzene and toluene) compared with fluids from the ODP Mound field. The ODP Mound fluids, however, are characterized by higher C₁/(C₂ + C₃) and benzene:toluene ratios than those from the Dead Dog field. The aqueous organic compounds in these fluids have been derived from both bacterial processes (methanogenesis in low temperature regions during recharge) as well as from thermogenic processes in higher temperature portions of the subsurface reaction zone. As the sediments undergo hydrothermal alteration, carbon dioxide and hydrocarbons are released to solution as organic matter degrades via a stepwise oxidation process. Compositional and isotopic differences in the aqueous hydrocarbons indicate that maximum subsurface temperatures at the ODP Mound are greater than those at the Dead Dog field. Maximum subsurface temperatures were calculated assuming that thermodynamic equilibrium is attained between alkenes and alkanes, benzene and toluene, and carbon dioxide and methane. The calculated temperatures for alkene-alkane equilibrium are consistent with differences in the dissolved Cl concentrations in fluids from the two fields, and confirm that subsurface temperatures at the ODP Mound are hotter than those at the Dead Dog field. Temperatures calculated assuming benzene-toluene equilibrium and carbon dioxide-methane equilibrium are similar to observed exit temperatures, and do not record the hottest subsurface conditions. The difference in subsurface temperatures estimated using organic geochemical thermometers reflects subsurface cooling processes via mixing of a hot, low salinity vapor with a cooler, seawater salinity fluid. Because of the disparate temperature dependence of alkene-alkane and benzene-toluene equilibria, the mixed fluid records both the high and low temperature equilibrium conditions. These calculations indicate that vapor-rich fluids are presently being formed in the crust beneath the ODP Mound, yet do not reach the surface due to mixing with the lower temperature fluids.     

Late Holocene environmental conditions in Coronation Gulf,southwestern Canadian Arctic Archipelago: evidence from dinoflagellate cysts,other non‐pollen palynomorphs,and pollen

Boxcore 99LSSL‐001 (68.095° N, 114.186° W; 211 m water depth) from Coronation Gulf represents the first decadal‐scale marine palynology and late Holocene sediment record for the southwestern part of the Northwest Passage. The record was studied for organic‐walled microfossils (dinoflagellate cysts, non‐pollen palynomorphs), pollen, terrestrial spores, and sediment characteristics. ²¹⁰Pb, ¹³⁷Cs, and three accelerator mass spectrometry ¹⁴C dates constrain the chronology. Three prominent palaeoenvironmental zones were identified. During the interval AD 1470–1680 (Zone I), the climate was warmer and wetter than at present, and environmental conditions were more favourable to biological activity and northward boreal forest migration, with reduced sea‐ice and a longer open‐water (growing) season. The interval AD 1680–1940 (Zone II) records sea‐ice increase, and generally cool, polar conditions during the Little Ice Age. During AD 1940–2000 (Zone III), organic microfossils indicate an extended open‐water season and decreased sea‐ice, with suggested amelioration surpassing that of Zone I. Although more marine studies are needed to place this record into an appropriate context, the succession from ameliorated (Zone I) to cooler, sea‐ice influenced conditions (Zone II) and finally to 20th‐century warming (Zone III) corresponds well with several terrestrial climatic records from the neighbouring mainland and Victoria Island, and with lower‐resolution marine records to the west. Copyright © 2011 John Wiley & Sons, Ltd.