Role of groundwater protection planning in groundwater governance: A case study from North India

In the present case study, impact of urbanization and industrial development on the shallow groundwater regime of Saharanpur town of Uttar Pradesh in India is examined with the aim of planning groundwater protection for better governance. The hazardous physicochemical and bacteriological parameters and heavy metals detected in the shallow aquifer include harmful pathogens like fecal coliforms, heavy metals like cadmium, chromium, nitrates and sulphates. An assessment of ground water vulnerability using the well known DRASTIC method has confirmed that the shallow groundwater in some central and southern localities of Saharanpur town fall in the medium risk zones. Further, using field data of 32 electrical resistivity soundings, the protective capacity of the unconfined aquifer is assessed in terms of a ‘total longitudinal conductance’ of the semi-pervious to impervious sediments overlying the unconfined aquifer. However, some areas aligned along a northwest-southeast and in the western parts of the town seem to have relatively higher protective capacity against infiltrating waste pollutants. A ground water protection planning map prepared by combining the DRASTIC map and the ‘potentially hazardous pollutants’ map has brought out the need to install eleven new groundwater quality monitoring wells in the town at locations near the line sources and point sources of pollution. This approach can be readily employed by the decision makers in framing sound guidelines for groundwater protection and governance.     

Assessment of groundwater potential zone using remote sensing,GIS and multi criteria decision analysis techniques

The sustainable development and management of groundwater resource needs quantitative assessment, based on scientific principle and recent techniques. In the present study, groundwater potential zone is being determined using remote sensing, Geographical Information System (GIS) and Multi-Criteria Decision Analysis (MCDA) techniques using various thematic layers viz. geomorphology, geology, drainage density, slope, rainfall, soil texture, groundwater depth, soil depth, lineament and land use/ land cover. The Analytic Hierarchy Approach (AHP) is used to determine the weights of various themes for identifying the groundwater potential zone based on weights assignment and normalization with respect to the relative contribution of the different themes to groundwater occurrence. Finally, obtained groundwater potential zones were classified into five categories, viz. low, medium, medium-high, high and very high potential zone. The result depicts the groundwater potential zone in the study area and found to be helpful in better development and management planning of groundwater resource.     

Dump slope stability analysis – A case study

In opencast mining operation, the stability of waste materials stands at high priority from the safety and economic perspective. Poor management of overburden (OB) dump results the instability of slope in an opencast mine. The present paper deals with the stability analysis of dump material of an opencast coal mine at Talcher coal field, Angul district, Odisha, by means of different geotechnical parameters and mineralogical composition affecting the dump slope. The prolonged rainfall in the mining area causes dump failure and loss of valuable life and property. A recent dump failure that occurred in 2013 at Basundhara mines of Mahanadi Coalfields Limited (MCL), Odisha, took 14 lives, and created problems for the mining industry. Most of the dump failure that occurs in the study area are mainly due to increase in pore water pressure as a result of rainfall infiltration. The stability of the waste dump was investigated using the limit equilibrium analysis to suggest an economical, sustainable and safe disposal of the dump in the study area.     

Dynamicity of the Himalayan landslide — A tectono-geotechnical appraisal of the 13<Superscript>th</Superscript> mile landslide,Sikkim

Understanding the causes of slope development with movement initiation of land sliding requires knowledge on dynamicity, displacement, strain concentration and factor of safety. The 13^th mile landslide on Gangtok-Nathula road of the Sikkim Himalaya has seriously affected the Indo-China trade route. To quantify the spatial movement pattern, strain analysis and identification of zones of safety were attempted which indicates that differential movement activity of the landslide zone is co-relatable with differential strain pattern with an overall imprint of the Himalaya collision tectonics.     

Shallow lithosphere-asthenosphere boundary beneath Cambay Rift Zone of India: Inferred presence of carbonated partial melt

A vast area between Phalodi in Jodhpur and Pokaran in Jaisalmer district of western Rajasthan, is occupied distinctly by rocky, shallow gravelly surfaces and occasional hills. These surfaces exhibit quartz and quartzite pebbles, angular, sub-angular and few rounded sandstone gravels, have slightly convex outline and can be best described as desert pavements. Such land features assume significance because of their extent and variability under a dominantly dry aeolian environment. Morphology and distributional pattern of such formations indicate that sediments are either of in situ origin or may have been transported to a short distance. The present study is based on field level assessment of such surfaces in the above two desert districts. Over much of the area, the profile shows a surficial concentration of gravels followed by thick sand and silt mixed with gravels and then the parent material. There are also occasional rock outcrops of very low relief exhibiting vertical, horizontal and conchoidal pattern of fractures over these surfaces near Pokaran and north of Jaisalmer which indicate disintegration of rocks under extreme diurnal fluctuation of temperature. Such manifestations in the morphology indicate impact of both thermal as well as aeolian processes. In the east of Jaisalmer town near Basanpir and Bhojka, the pavement surfaces are found covered with abundant sub-rounded to rounded pebbles and cobbles. This type of condition would indicate a profound action by fluvial activities followed by wind sorting. Our study found significant spatial variability in the distribution of pavement surfaces, which carried imprints of climatic fluctuations and environment of deposition during Holocene.     

Discrimination of explosions and earthquakes: An example based on spectra and source parameters of the 11<Superscript>th</Superscript> May 1998 Pokhran explosion and the 9<Superscript>th</Superscript> April 2009 earthquake

We compare the P-, S- and Lg- spectra of the 11^th May, 1998 Pokhran underground nuclear explosion (NE) with those of an earthquake (EQ) of comparable magnitude that occurred in its vicinity (~100 km west) on 9^th April, 2009, utilizing the waveforms recorded by a Global Seismograph Network station at Nilore (NIL), Pakistan. The contiguous occurrence of these events and the similarity of the travel paths provided a good opportunity to discriminate the nature of the sources. Our results suggest that the Pn/Lg and Pn/Sn amplitude ratios of the explosion and earthquake waveforms exhibit distinct differences in the higher frequency window. Further, since the P-phases have high signal to noise ratio compared to their S counterparts, we utilize their spectra to derive the source parameters of the NE and EQ sources. Our results show that the seismic moment, corner frequency and source dimension of the explosion are ~1.58X10¹⁷ Nm, 1.18 Hz and ~0.793 km respectively. The moment magnitude (M_W) and surface wave magnitude (M_S) for the nuclear explosion are estimated to be ~5.4 and ~3.57 respectively. The values of M_W (5.3) and M_S (4.3) obtained by us for the earthquake are consistent with the estimates in the Harvard catalog and earlier published results. The estimate of M_W for the nuclear explosion was hitherto not available. Lastly, we estimate the yield of the NE to be ~50 kt from the surface wave magnitude and discuss the various limitations related to its estimation.     

Mineralogy and geochemistry of granitoids from Kinnaur region,Himachal Higher Himalaya,India: Implication on the nature of felsic magmatism in the collision tectonics

Felsic magmatism in the southern part of Himachal Higher Himalaya is constituted by Neoproterozoic granite gneiss (GGn), Early Palaeozoic granitoids (EPG) and Tertiary tourmaline-bearing leucogranite (TLg). Magnetic susceptibility values (<3 ×10^?3 SI), molar Al₂ O ₃/(CaO + Na₂ O + K ₂O) (≥1.1), mineral assemblage (bt–ms–pl–kf–qtz ± tur ± ap), and the presence of normative corundum relate these granitoids to peraluminous S-type, ilmenite series (reduced type) granites formed in a syncollisional tectonic setting. Plagioclase from GGn (An₁₀–An₃₁) and EPG (An₁₅–An₃₃) represents oligoclase to andesine and TLg (An₂–An₁₅) represents albite to oligoclase, whereas compositional ranges of K-feldspar are more-or-less similar (Or₈₈ to Or₉₅ in GGn, Or₈₆ to Or₉₇ in EPG and Or₈₇ to Or₉₄ in TLg). Biotites in GGn (Mg/Mg + Fe^t= 0.34–0.45), EPG (Mg/Mg + Fe^t= 0.27–0.47), and TLg (Mg/Mg + Fe^t= 0.25–0.30) are ferribiotites enriched in siderophyllite, which stabilised between FMQ and HM buffers and are characterised by dominant 3Fe\(\rightleftharpoons \)2Al, 3Mg\(\rightleftharpoons \)2Al substitutions typical of peraluminous (S-type), reducing felsic melts. Muscovite in GGn (Mg/Mg + Fe^t=0.58–0.66), EPG (Mg/Mg + Fe^t=0.31?0.59), and TLg (Mg/Mg + Fe^t=0.29–0.42) represent celadonite and paragonite solid solutions, and the tourmaline from EPG and TLg belongs to the schorl-elbaite series, which are characteristics of peraluminous, Li-poor, biotite-tourmaline granites. Geochemical features reveal that the GGn and EPG precursor melts were most likely derived from melting of biotite-rich metapelite and metagraywacke sources, whereas TLg melt appears to have formed from biotite-muscovite rich metapelite and metagraywacke sources. Major and trace elements modelling suggest that the GGn, EPG and TLg parental melts have experienced low degrees (～13, ～17 and ～13%, respectively) of kf–pl–bt fractionation, respectively, subsequent to partial melting. The GGn and EPG melts are the results of a pre-Himalayan, syn-collisional Pan-African felsic magmatic event, whereas the TLg is a magmatic product of Himalayan collision tectonics.     

Consistent seasonal snow cover depth and duration variability over the Western Himalayas (WH)

Precipitation in solid form, i.e., snow, during winter season over the Western Himalayas (WH) leads to the build-up of seasonal snow cover. Seasonal snow cover build-up (snow cover depth and duration) largely depends on atmospheric variables such as temperature, precipitation, radiation, wind, etc. Integrated (combined) influence of atmospheric variables on seasonal snow cover gets reflected in terms of spatial and temporal variability in seasonal snow cover build-up pattern. Hence spatial and temporal variability of seasonal snow cover build-up can serve as a good indicator of climate change in high altitude mountainous regions like the WH. Consistent seasonal snow cover depth and duration, delay days and early melt days of consistent seasonal snow cover at 11 stations spread across different mountain ranges over the WH were analyzed. Mean, maximum and percentiles (25th, 50th, 75th, 90th and 95th) of consistent seasonal snow cover depth and duration show decline over the WH in the recent past 2–3 decades. Consistent seasonal snow cover is found to melt early and snow cover build-up pattern is found to show changes over the WH. Decline in consistent seasonal snow cover depth, duration and changing snow cover build-up pattern over the WH in recent decades indicate that WH has undergone considerable climate change and winter weather patterns are changing in the WH.     

Developing synergy regression models with space-borne ALOS PALSAR and Landsat TM sensors for retrieving tropical forest biomass

Forest stand biomass serves as an effective indicator for monitoring REDD (reducing emissions from deforestation and forest degradation). Optical remote sensing data have been widely used to derive forest biophysical parameters inspite of their poor sensitivity towards the forest properties. Microwave remote sensing provides a better alternative owing to its inherent ability to penetrate the forest vegetation. This study aims at developing optimal regression models for retrieving forest above-ground bole biomass (AGBB) utilising optical data from Landsat TM and microwave data from L-band of ALOS PALSAR data over Indian subcontinental tropical deciduous mixed forests located in Munger (Bihar, India). Spatial biomass models were developed. The results using Landsat TM showed poor correlation (R² = 0.295 and RMSE = 35 t/ha) when compared to HH polarized L-band SAR (R² = 0.868 and RMSE = 16.06 t/ha). However, the prediction model performed even better when both the optical and SAR were used simultaneously (R² = 0.892 and RMSE = 14.08 t/ha). The addition of TM metrics has positively contributed in improving PALSAR estimates of forest biomass. Hence, the study recommends the combined use of both optical and SAR sensors for better assessment of stand biomass with significant contribution towards operational forestry.