Reconstructing the IRAS Point Source Catalog Redshift Survey with a generalized PIZA

We study the influence of different magnetic boundary conditions on the generation of magnetic fields by turbulent convection. It is found that the structure and strength of the generated field in the vicinity of the boundary is strongly dependent on the choice of boundary conditions. In the convective interior, however, the solutions remain largely insensitive to the boundary conditions. In all cases the overall efficiency of the dynamo process remains high with a steady state magnetic energy density between 12 and 25 per cent of the turbulent kinetic energy, and peak field values exceeding the equipartition level. These results support the idea that the solar granulation may constitute a dynamo source for magnetic fields in the quiet photosphere.     

Highly fractionated I-type granites in NE China (II): isotopic geochemistry and implications for crustal growth in the Phanerozoic

NE China is the easternmost part of the Central Asian Orogenic Belt (CAOB). The area is distinguished by widespread occurrence of Phanerozoic granitic rocks. In the companion paper (Part I), we established the Jurassic ages (184–137 Ma) for three granitic plutons: Xinhuatun, Lamashan and Yiershi. We also used geochemical data to argue that these rocks are highly fractionated I-type granites. In this paper, we present Sr–Nd–O isotope data of the three plutons and 32 additional samples to delineate the nature of their source, to determine the proportion of mantle to crustal components in the generation of the voluminous granitoids and to discuss crustal growth in the Phanerozoic.

Despite their difference in emplacement age, Sr–Nd isotopic analyses reveal that these Jurassic granites have common isotopic characteristics. They all have low initial ⁸⁷Sr/⁸⁶Sr ratios (0.7045±0.0015), positive _Nd(T) values (+1.3 to +2.8), and young Sm–Nd model ages (720–840 Ma). These characteristics are indicative of juvenile nature for these granites. Other Late Paleozoic to Mesozoic granites in this region also show the same features. Sr–Nd and oxygen isotopic data suggest that the magmatic evolution of the granites can be explained in terms of two-stage processes: (1) formation of parental magmas by melting of a relatively juvenile crust, which is probably a mixed lithology formed by pre-existing lower crust intruded or underplated by mantle-derived basaltic magma, and (2) extensive magmatic differentiation of the parental magmas in a slow cooling environment.

The widespread distribution of juvenile granitoids in NE China indicates a massive transfer of mantle material to the crust in a post-orogenic tectonic setting. Several recent studies have documented that juvenile granitoids of Paleozoic to Mesozoic ages are ubiquitous in the Central Asian Orogenic Belt, hence suggesting a significant growth of the continental crust in the Phanerozoic.     

A review of the geodynamic setting of large-scale Late Mesozoic gold mineralization in the North China Craton: an association with lithospheric thinning

Abundant gold deposits are distributed along the margins of the North China Craton (NCC). Occurring throughout the Precambrian basement and located in or proximal to Mesozoic granitoids, these deposits show a consistent spatial–temporal association with Late Jurassic–Early Cretaceous magmatism and are characterized by quartz lode or disseminated styles of mineralization with extensive alteration of wall rock. Their ages are mainly Early Cretaceous (130–110 Ma) and constrain a very short period of metallogenesis. Sr–Nd–Pb isotopic tracers of ores, minerals and associated rocks indicate that gold and associated metals mainly were derived from multi-sources, i.e., the wall rocks (Precambrian basement and Mesozoic granites) and associated mafic rocks.Previous studies, including high surface heat flow, uplift and later basin development, slow seismic wave speeds in the upper mantle, and a change in the character of mantle xenoliths sampled by Paleozoic to Cenozoic magmas, have been used to suggest that ancient, cratonic mantle lithosphere was removed from the base of the NCC some time after the Ordovician, and replaced by younger, less refractory lithospheric mantle. The geochemistry and isotopic compositions of the mafic rocks associated with gold mineralization (130–110 Ma) indicate that they were derived from an ancient enriched lithospheric mantle source; whereas, the mafic dikes and volcanic rocks younger than 110 Ma were derived from a relatively depleted mantle source, i.e., asthenospheric mantle. According to their age and sources, relation to magmatism and geodynamic framework, the gold deposits were formed during lithospheric thinning. The removal of lithospheric mantle and the upwelling of new asthenospheric mantle induced partial melting and dehydration of the lithospheric mantle and lower crust due to an increase of temperature. The fluids derived from the lower crust were mixed with magmatic and meteoric waters, and resulted in the deposition of gold and associated metals.     

Funding low carbon cities: local perspectives on opportunities and risks

There are compelling reasons for policy makers to be interested in the low-carbon agenda. More than half of the world's population lives in, and more than half of the world's economic output comes from, cities. Up to 70% of global carbon emissions can also be attributed to consumption that takes place in cities. Recent research has shown that cost-effective investments in low-carbon options could deliver a 40% reduction in GHG emissions from cities by 2020, while also providing wider economic benefits such as enhanced competitiveness and increased employment. As yet, however, investments in low-carbon cities have not been made at scale due mainly to the scale of the finance required, local government budgetary constraints, and perceptions about their costs and benefits. With a focus on the UK, a contemporary account is provided of what local authorities see as the major financial risks associated with funding low-carbon cities. Practical proposals – which also have more general relevance to the future financing of low-carbon cities around the world – are offered on how local authorities, in conjunction with central government, the private sector, and institutional investors, can effectively manage these risks.

Policy relevance

Cities house more than half of the world's population, generate more than half of the world's economic output, and produce between 40% and 70% of all anthropogenic GHG emissions. In the UK, 70% of such emissions are under the influence of its local authorities. Thus, one of the key public policy challenges for the low-carbon transition is how it should be financed. There are several obstacles and related risks to this transition, including financial and legal obstacles and the differing views and perceptions of stakeholders. These can be attenuated, somewhat, by national government support at scale, local authority leadership, and cooperation between other authorities and the private sector, and the development of tools and guidance to reduce transaction costs.     

山西五台山-恒山地区晚太古-早元古代若干关键地质问题的再认识:单颗粒锆石离子探针质谱年龄提出的地质制约

大量准确度很高的单颗粒锆石迅谱(SHRIMP)年代学数据表明,五台山-恒山绿岩带形成于2500Ma之前,五台山-恒山绿岩带形成后即与较老的阜平块体拼合。因此,该过程中有大量火山,深成活动及变质作用,是一次重要的造山运动。在1800Ma之前,本区还经历了一次明显的构造热事件,主要表现为在地壳较深水平上大规模的冲断作用,使原来为不同地壳水平的块体处于同一地壳水平。本文还对原五台群下部层位板峪口组和金岗库组的归属及铁堡不整合面提出了新的看法。     

A new approach for measuring surface hydrological connectivity

The development of surface hydrological connectivity is a key determinant of flood magnitude in drylands. Thresholds in runoff response may be reached when isolated runoff-generating areas connect with each other to form continuous links to river channels, enabling these areas to contribute to flood hydrographs. Such threshold behaviour explains observed nonlinearities and scale dependencies of dryland rainfall–runoff relationships and complicates attempts at flood prediction. However, field methods for measuring the propensity of a surface to transmit water downslope are lacking, and conventional techniques of infiltration measurement are often inappropriate for use on non-agricultural drylands. Here, we argue for a reconceptualization of the dryland surface runoff process, suggesting that the downslope transfer of water should be considered alongside surface infiltration; that is, there is a need for the “aggregated” measurement of infiltration and overland flow hydraulics. Surface application of a set volume of water at a standardized rate generates runoff that travels downslope; the distance it travels downslope is determined by infiltration along the flow, integration of flow paths, and flow resistance. We demonstrate the potential of such a combined measurement system coupled with structure-from-motion photogrammetry to identify surface controls on runoff generation and transfer on dryland hillslopes, with vegetation, slope, surface stone cover, and surface roughness all having a significant effect. The measurement system has been used on slopes up to 37° compared with the flat surface typically required for infiltration methods. On average, the field workflow takes ~10–15 min, considerably quicker than rainfall simulation. A wider variety of surfaces can be sampled with relative ease, as the method is not restricted to stone and vegetation-free land. We argue that this aggregated measurement represents surface connectivity and dryland runoff response better than standard hydrological approaches and can be applied on a much greater variety of dryland surfaces.     

Dynamic adaptive pathways in downscaled climate change scenarios

The parallel scenario process enables characterization of climate-related risks and response options to climate change under different socio-economic futures and development prospects. The process is based on representative concentration pathways, shared socio-economic pathways, and shared policy assumptions. Although this scenario architecture is a powerful tool for evaluating the intersection of climate and society at the regional and global level, more specific context is needed to explore and understand risks, drivers, and enablers of change at the national and local level. We discuss the need for a stronger recognition of such national-scale characteristics to make climate change scenarios more relevant at the national and local scale, and propose ways to enrich the scenario architecture with locally relevant details that enhance salience, legitimacy, and credibility for stakeholders. Dynamic adaptive pathways are introduced as useful tools to draw out which elements of a potentially infinite scenario space connect with decision-relevant aspects of particular climate-related and non-climate-related risks and response options. Reviewing adaptation pathways for New Zealand case studies, we demonstrate how this approach could bring the global-scale scenario architecture within reach of local-scale decision-making. Such a process would enhance the utility of scenarios for mapping climate-related risks and adaptation options at the local scale, involving appropriate stakeholder involvement.     

Crop modelling: towards locally relevant and climate-informed adaptation

A gap between the potential and practical realisation of adaptation exists: adaptation strategies need to be both climate-informed and locally relevant to be viable. Place-based approaches study local and contemporary dynamics of the agricultural system, whereas climate impact modelling simulates climate-crop interactions across temporal and spatial scales. Crop-climate modelling and place-based research on adaptation were strategically reviewed and analysed to identify areas of commonality, differences, and potential learning opportunities to enhance the relevance of both disciplines through interdisciplinary approaches. Crop-modelling studies have projected a 7–15% mean yield change with adaptation compared to a non-adaptation baseline (Nature Climate Change 4:1–5, 2014). Of the 17 types of adaptation strategy identified in this study as place-based adaptations occurring within Central America, only five were represented in crop-climate modelling literature, and these were as follows: fertiliser, irrigation, change in planting date, change in cultivar and area cultivated. The breath and agency of real-life adaptation compared to its representation in modelling studies is a source of error in climate impact simulations. Conversely, adaptation research that omits assessment of future climate variability and impact does not enable to provide sustainable adaptation strategies to local communities so risk maladaptation. Integrated and participatory methods can identify and reduce these sources of uncertainty, for example, stakeholder’s engagement can identify locally relevant adaptation pathways. We propose a research agenda that uses methodological approaches from both the modelling and place-based approaches to work towards climate-informed locally relevant adaptation.     

Ti-in-zircon thermometry: applications and limitations

The titanium concentrations of 484 zircons with U-Pb ages of ∼1 Ma to 4.4 Ga were measured by ion microprobe. Samples come from 45 different igneous rocks (365 zircons), as well as zircon megacrysts (84) from kimberlite, Early Archean detrital zircons (32), and zircon reference materials (3). Samples were chosen to represent a large range of igneous rock compositions. Most of the zircons contain less than 20 ppm Ti. Apparent temperatures for zircon crystallization were calculated using the Ti-in-zircon thermometer (Watson et al. 2006, Contrib Mineral Petrol 151:413–433) without making corrections for reduced oxide activities (e.g., TiO₂ or SiO₂), or variable pressure. Average apparent Ti-in-zircon temperatures range from 500° to 850°C, and are lower than either zircon saturation temperatures (for granitic rocks) or predicted crystallization temperatures of evolved melts (∼15% melt residue for mafic rocks). Temperatures average: 653 ± 124°C (2 standard deviations, 60 zircons) for felsic to intermediate igneous rocks, 758 ± 111°C (261 zircons) for mafic rocks, and 758 ± 98°C (84 zircons) for mantle megacrysts from kimberlite. Individually, the effects of reduced or , variable pressure, deviations from Henry’s Law, and subsolidus Ti exchange are insufficient to explain the seemingly low temperatures for zircon crystallization in igneous rocks. MELTs calculations show that mafic magmas can evolve to hydrous melts with significantly lower crystallization temperature for the last 10–15% melt residue than that of the main rock. While some magmatic zircons surely form in such late hydrous melts, low apparent temperatures are found in zircons that are included within phenocrysts or glass showing that those zircons are not from evolved residue melts. Intracrystalline variability in Ti concentration, in excess of analytical precision, is observed for nearly all zircons that were analyzed more than once. However, there is no systematic change in Ti content from core to rim, or correlation with zoning, age, U content, Th/U ratio, or concordance in U-Pb age. Thus, it is likely that other variables, in addition to temperature and , are important in controlling the Ti content of zircon. The Ti contents of igneous zircons from different rock types worldwide overlap significantly. However, on a more restricted regional scale, apparent Ti-in-zircon temperatures correlate with whole-rock SiO₂ and HfO₂ for plutonic rocks of the Sierra Nevada batholith, averaging 750°C at 50 wt.% SiO₂ and 600°C at 75 wt.%. Among felsic plutons in the Sierra, peraluminous granites average 610 ± 88°C, while metaluminous rocks average 694 ± 94°C. Detrital zircons from the Jack Hills, Western Australia with ages from 4.4 to 4.0 Ga have apparent temperatures of 717 ± 108°C, which are intermediate between values for felsic rocks and those for mafic rocks. Although some mafic zircons have higher Ti content, values for Early Archean detrital zircons from a proposed granitic provenance are similar to zircons from many mafic rocks, including anorthosites from the Adirondack Mts (709 ± 76°C). Furthermore, the Jack Hills zircon apparent Ti-temperatures are significantly higher than measured values for peraluminous granites (610 ± 88°C). Thus the Ti concentration in detrital zircons and apparent Ti-in-zircon temperatures are not sufficient to independently identify parent melt composition. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Detection of mRNA sequences homologous to the human glutathione peroxidase and rat cytochrome P-450IVA1 genes in Mytilus edulis

In this study we have used cloned gene probes for human glutathione peroxidase (GPX), rat cytochrome P-450IVA1 and rat cytochrome P-450IIE1 to detect homologous sequences in RNA from the hepato-pancreas of Mytilus edulis. The presence of sequences hybridising to the GPX and P-450IVA1 probes, but not to the P-450IIE1 probe, confirms the ancient origin of the former genes and indicates that conserved-sequence DNA probes from higher organisms can be used to examine the structure and function of genes of environmental interest in marine organisms.