An experimental investigation of high-temperature interactions between seawater and rhyolite,andesite, basalt and peridotite

Natural seawater was allowed to react with rhyolite, andesite, basalt, and peridotite at 200°–500° C, and 1,000 bars at water/rock mass ratios of 5 and 50 in order to investigate the effects of rock type, water/rock ratio, and temperature on solution chemistry and alteration mineralogy. The results indicate that interactions of seawater with various igneous rocks are similar in the production of a hydrous Mg-silicate and anhydrite as major alteration products. Fluids involved in the interactions lose Mg to alteration phases while leaching Fe, Mn, and Si from the rocks. The pH of the solutions is primarily controlled by Mg-OH-silicate formation and therefore varies with Mg and Si concentration of the system. Other reactions which involve Mg (such as Mg-Ca exchange) or which produce free H⁺, cause major differences in fluid chemistry between different seawater/ rock systems. High water/rock ratio systems (50/1) are generally more acidic and more efficient in leaching than low ratio systems (5/1), due to relatively more seawater Mg available for Mgsilicate production. The experiments show that large-scale seawater/rock interaction could exert considerable control on the chemistry of seawater, as well as producing large bodies of altered rock with associated ore-deposits.Active plate margins of convergence or divergence are suitable environments for hydrothermal systems due to the concurrence of igneous activity, tectonism, and a nearby water reservoir (seawater or connate water). The experimental data indicate that seawater interactions with igneous host rocks could generate many of the features of ore-deposits such as the Kuroko deposits of Japan, the Raul Mine of Peru, the Bleida deposit of Morocco, and deposits associated with ophiolites. Serpentinization of peridotite and alteration of igneous complexes associated with plate margins can also be explained by seawater interaction with the cooling rock. Geothermal energy production could benefit from experimental investigations of hot water/rock systems by development of chemical, temperature, and pressure control systems to maximize the lifetime of hydrothermal flow.     

Granitic plutonism as an indicator of microplates in the Palaeozoic of central and eastern Maine

Oxygen and strontium isotope ratios have been used to characterize source regions for granitic magmas for a transect across the northern Appalachian orogen in central and eastern Maine. The northwestern plutons (Katahdin and Seboeis) have δ¹⁸O values of 10.3–13.3 and initial ⁸⁷Sr/⁸⁶Sr ratios of 0.7083 and 0.7066, respectively. The central plutons (Bottle Lake and Center Pond) have lower δ¹⁸O values (8.2–9.9) and initial ⁸⁷Sr/⁸⁶Sr ratios (0.7043–0.7055). The southeastern plutons (Lucerne and Deblois) have δ¹⁸O values (9.0–11.0) but initial ⁸⁷Sr/⁸⁶Sr ratios (0.7077 and 0.7041, respectively) which are intermediate between the northwestern and central plutons.Source models derived from these results and other petrological and geochemical data reflect the juxtaposition of discrete source regions by transcurrent faulting, which may be related to oblique plate motions. This model illustrates the importance of microplate accretion in the Palaeozoic history of the northern Appalachian orogen.     

The Relative Impact of Regional Scale Land Cover Change and Increasing CO2 over China

A series of 17-yr equilibrium simulations using the NCAR CCM3 (T42 resolution) were performed to investigate the regional scale impacts of land cover change and increasing CO2 over China. Simulations with natural and current land cover at CO2 levels of 280,355, 430, and 505 ppmv were conducted. Results show statistically significant changes in major climate fields (e.g. temperature and surface wind speed) on a 15-yr average following land cover change. We also found increases in the maximum temperature and in the diurnal temperature range due to land cover change. Increases in CO2 affect both the maximum and minimum temperature so that changes in the diurnal range are small. Both land cover change and CO2 change also impact the frequency distribution of precipitation with increasing CO2 tending to lead to more intense precipitation and land cover change leading to less intense precipitation-indeed, the impact of land cover change typically had the opposite effect versus the impacts of CO2. Our results provide support for the inclusion of future land cover change scenarios in long-term transitory climate inodelling experiments of the 21st Century. Our results also support the inclusion of land surface models that can represent future land cover changes resulting from an ecological response to natural climate variability or increasing CO2. Overall, we show that land cover change can have a significant impact on the regional scale climate of China, and that regionally, this impact is of a similar magnitude to increases in CO2 of up to about 430 ppmv. This means that that the impact of land cover change must be accounted for in detection and attribution studies over China.     

A Spatial Variant of the Basic Reproduction Number for the New Orleans Yellow Fever Epidemic of 1878

A spatial variant of the basic reproduction number (R₀), here defined as the number of subsequent deaths attributed to an initial mortality, can be used to identify geographic variation within an epidemic. A spatial R₀ was calculated at the neighborhood level, here defined by a 50‐m buffer surrounding an index case, for mortality data from the 1878 yellow fever epidemic of New Orleans. The highest number of secondary mortalities linked to a neighborhood index case was twelve, with a further eighty‐seven extrapolated morbidity cases. Results also highlight the importance of multideath residences and cultural contacts in neighborhood‐level disease spread.     

Three mechanisms of ore re-mobilisation during amphibolite facies metamorphism at the Montauban Zn–Pb–Au–Ag deposit

The relative importance of mechanical re-mobilisation, hydrothermal dissolution and re-precipitation, and sulphide melting in controlling redistribution of metals during concurrent metamorphism and deformation is evaluated at the middle amphibolite facies Montauban deposit in Canada. As at many other deposits, ductile deformation was important in driving mechanical re-mobilisation of massive sulphides from limb regions into hinge regions of large-scale folds and is thus the most important for controlling the economics of Pb and Zn distribution. Two possible stages of hydrothermally driven re-mobilisation are discussed, each of which produces characteristically different alteration assemblages. Prograde hydrothermal re-mobilisation is driven by pyrite de-sulphidation and concurrent chlorite dehydration and is thus an internally driven process. At Montauban, the H₂S-rich fluid generated through this process allowed re-mobilisation of gold into the wall rock, where it was deposited in response to sulphidation of Fe Mg silicates. Retrograde hydrothermal re-mobilisation is an externally driven process, whereby large volumes of fluids from outside the deposit may dissolve and re-precipitate metals, and cause hydration of silicate minerals. This second hydrothermally driven process is not recognised at Montauban. Sulphide melting occurred as temperatures neared the peak metamorphic conditions. Melting initiated in the massive sulphides through arsenopyrite breakdown, and a small volume of melt was subsequently re-mobilised into the wall rock. Trace element partitioning and fractional crystallisation of this melt generated a precious metal-rich fractionate, which remained mobile until well after peak metamorphism. Thus, prograde hydrothermal re-mobilisation and sulphide melting were the most important mechanisms for controlling the distribution of Au and Ag.     

Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

Detrital zircon geochronology of Carboniferous–Cretaceous strata in the Lhasa terrane, Southern Tibet

Sedimentary strata in the Lhasa terrane of southern Tibet record a long but poorly constrained history of basin formation and inversion. To investigate these events, we sampled Palaeozoic and Mesozoic sedimentary rocks in the Lhasa terrane for detrital zircon uranium–lead (U–Pb) analysis. The >700 detrital zircon U–Pb ages reported in this paper provide the first significant detrital zircon data set from the Lhasa terrane and shed new light on the tectonic and depositional history of the region. Collectively, the dominant detrital zircon age populations within these rocks are 100–150, 500–600 and 1000–1400 Ma. Sedimentary strata near Nam Co in central Lhasa are mapped as Lower Cretaceous but detrital zircons with ages younger than 400 Ma are conspicuously absent. The detrital zircon age distribution and other sedimentological evidence suggest that these strata are likely Carboniferous in age, which requires the existence of a previously unrecognized fault or unconformity. Lower Jurassic strata exposed within the Bangong suture between the Lhasa and Qiangtang terranes contain populations of detrital zircons with ages between 200 and 500 Ma and 1700 and 2000 Ma. These populations differ from the detrital zircon ages of samples collected in the Lhasa terrane and suggest a unique source area. The Upper Cretaceous Takena Formation contains zircon populations with ages between 100 and 160 Ma, 500 and 600 Ma and 1000 and 1400 Ma. Detrital zircon ages from these strata suggest that several distinct fluvial systems occupied the southern portion of the Lhasa terrane during the Late Cretaceous and that deposition in the basin ceased before 70 Ma. Carboniferous strata exposed within the Lhasa terrane likely served as source rocks for sediments deposited during Cretaceous time. Similarities between the lithologies and detrital zircon age‐probability plots of Carboniferous rocks in the Lhasa and Qiangtang terranes and Tethyan strata in the Himalaya suggest that these areas were located proximal to one another within Gondwanaland. U–Pb ages of detrital zircons from our samples and differences between the geographic distribution of igneous rocks within the Tibetan plateau suggest that it is possible to discriminate a southern vs. northern provenance signature using detrital zircon age populations.     

Fast approximate EM induction modeling of metallic and UXO targets using a permeable prism

The time-domain EM induction response of non-magnetic and magnetic targets can be approximated using a conductive permeable prism composed of six faces of conductive plates, each face being composed of a set of conductive ribbons. The effect of magnetic permeability is included by the use of two “apparent flux gathering” coefficients, and two “effective magnetic permeability” coefficients, in the axial and transverse directions. These four magnetic property coefficients are a function of physical properties and geometry of the target, but are independent of prism orientation relative to a transmitter. The approximation algorithm is computationally fast, allowing inversions for target parameters to be achieved in seconds. The model is tested on profiles acquired with a Geonics EM63 time-domain EM metal detector over a non-magnetic copper pipe target, and a steel artillery shell in horizontal and vertical orientations. Results show that this approximation to a permeable prism has a capability of fitting geometric, conductivity and magnetic parameters at both early and late sample times. The magnetic parameters show strong change from early to late times on the EMI decay curve, indicating that the magnetic properties of the target have non-linear characteristics. It is proposed that these magnetic parameters and the nature of their non-linearity may carry additional discrimination information for distinguishing between intact munitions and scrap in UXO studies.     

Climate and human health: synthesizing environmental complexity and uncertainty

Broad relationships between weather and human health have long been recognized, and there is currently a large body of research examining the impacts of climate change on human health. Much of the literature in this area examines climate–health relationships at global or regional levels, incorporating mostly generalized responses of pathogens and vectors to broad changes in climate. Far less research has been done to understand the direct and indirect climate-mediated processes involved at finer scales. Thus, some studies simplify the role of climate and may over- or under-estimate the potential response, while others have begun to highlight the subtle and complex role for climate that is contingent on other relevant processes occurring in natural and social environments. These fundamental processes need to be understood to determine the effects of past, current and future climate variation and change on human health. We summarize the principal climate variables and climate-dependent processes that are believed to impact human health across a representative set of diseases, along with key uncertainties in these relationships.