Land Cover Classification Using High‐Resolution Aerial Photography in Adventdalen,Svalbard

A methodology was tested for high‐resolution mapping of vegetation and detailed geoecological patterns in the Arctic Tundra, based on aerial imagery from an unmanned aerial vehicle (visible wavelength – RGB, 6 cm pixel resolution) and from an aircraft (visible and near infrared, 20 cm pixel resolution). The scenes were fused at 10 and 20 cm to evaluate their applicability for vegetation mapping in an alluvial fan in Adventdalen, Svalbard. Ground‐truthing was used to create training and accuracy evaluation sets. Supervised classification tests were conducted with different band sets, including the original and derived ones, such as NDVI and principal component analysis bands. The fusion of all original bands at 10 cm resolution provided the best accuracies. The best classifier was systematically the maximum neighbourhood algorithm, with overall accuracies up to 84%. Mapped vegetation patterns reflect geoecological conditioning factors. The main limitation in the classification was differentiating between the classes graminea, moss and Salix, and moss, graminea and Salix, which showed spectral signature mixing. Silty‐clay surfaces are probably overestimated in the south part of the study area due to microscale shadowing effects. The results distinguished vegetation zones according to a general gradient of ecological limiting factors and show that VIS+NIR high‐resolution imagery are excellent tools for identifying the main vegetation groups within the lowland fan study site of Adventdalen, but do not allow for detailed discrimination between species.     

New Progress in LURR-Integrating with the Dimensional Method

The evolution laws of LURR (Loading–Unloading Response Ratio) before strong earthquakes, especially the peak point of LURR, are described in this paper. The results of four methods (experimental, numerical simulation, seismic data analysis and with damage mechanics analysis) lead to a consistent conclusion—the evolution laws of LURR before strong earthquakes are that, at the early stage of the seismic cycle, LURR will fluctuate around 1 and in the late stage, it rises swiftly and to its peak point. At some time after this peak point, a catastrophic event or events occur. These do not occur at the peak point, but lag behind. The lag time which is denoted by T ₂ depends on the magnitude M of the upcoming earthquake among other factors. In order to consider the influence of geophysical parameters in a specific region such as $ \dot{\gamma }, $ E _a and J _(t), where $ \dot{\gamma } $ is the shear strain rate of tectonic loading in situ, E _a is the sum of radiated energy of all earthquake occurring in a specific region measured during a long time duration (110 years in this paper) divided by the area of the region and the time duration, and J _(t) is a parameter denoting the LURR anomaly area weighted with Y (the value of LURR) and represents the expanse and degree of the seismogenic zone. The dimensional analysis method has been used to reveal the relation between M, T ₂ and other parameters in situ for more reliable earthquake prediction.     

Design and implementation of a voluntary collective earthquake insurance policy to cover low-income homeowners in a developing country

Understanding and evaluating disaster risk due to natural hazard events such as earthquakes creates powerful incentives for countries to develop planning options and tools to reduce potential damages. The use of models for earthquake risk evaluation allows obtaining outputs such as the loss exceedance curve, the expected annual loss and the probable maximum loss, which are probabilistic metrics useful for risk analyses, for designing strategies for risk reduction and mitigation, for emergency response strategies and for risk financing. This article presents, based on probabilistic risk models, the design and implementation of a risk transfer instrument to cover the private buildings of the city of Manizales, Colombia. This voluntary collective instrument provides financial protection to both, the estate tax payers and the low-income homeowners through a cross-subsidy strategy; besides, it promotes not only the insurance culture but also the solidarity of the community. The city administration and the insurance industry are promoting this program using the mechanism of the property tax payment. This collective insurance helps the government to access key resources for low-income householders recovery and improve disaster risk management at local level.     

APOD mission status and preliminary results

On September 20 th, 2015, twenty satellites were successfully deployed into a near-polar circular orbit at 520 km altitude by the Chinese CZ-6 test rocket, which was launched from the Tai Yuan Satellite Launch Center. Among these satellites, a set of 4 Cube Sats conform the atmospheric density detection and precise orbit determination(APOD) mission, which is projected for atmospheric density estimation from in-situ detection and precise orbit products. The APOD satellites are manufactured by China Spacesat Co. Ltd. and the payload instruments include an atmospheric density detector(ADD), a dual-frequency dualmode global navigation satellite system(GNSS) receiver(GPS and Beidou), a satellite laser ranging(SLR) reflector, and an S/Xband very long baseline interferometry(VLBI) beacon. In this paper, we compare the GNSS precise orbit products with colocated SLR observations, and the 3 D orbit accuracy shows better than 10 cm RMS. These results reveal the great potential of the onboard micro-electro-mechanical system(MEMS) GNSS receiver. After calibrating ADD density estimates with precise orbit products, the accuracy of our density products can reach about 10% with respect to the background density. Density estimates from APOD are of a great importance for scientific studies on upper atmosphere variations and useful for model data assimilation.     

Impacts of landscape fragmentation on simulated precipitation fields in the Amazonian sub-basin of Ji-Paraná using the Eta model

Numerical studies on impacts of landscape fragmentation due to land use and land cover change (LUCC) on precipitation fields over the Ji-Paraná basin in the Amazon region are carried out using atmospheric Eta model. Experiments consider historical data about LUCC over the basin from 1978 to 2000 and compare simulations under LUCC conditions with simulations under pristine conditions. In agreement with previous observational studies, model results do not show statistically significant impacts on precipitation in the region. Results indicate that variability in precipitation in this region is mainly controlled by large-scale atmospheric characteristics and soil moisture conditions. However, some limitations are identified in the model simulations, mainly associated to the diurnal cycle of precipitation.     

AUS: Anisotropic undrained shear strength model for clays

A total stress model applicable to clays under undrained conditions is presented. The model involves three strength parameters: the undrained shear strengths in triaxial compression, triaxial extension, and simple shear. The amount of physical anisotropy implied by the model is a function of the relative magnitude of these three strengths assuming a Mises-type plastic potential. Elastoplastic deformation characteristics below failure are accounted for by a hardening law requiring two additional parameters that can be related to the axial strains halfway to failure in triaxial compression and extension. Finally, elasticity is accounted for by Hooke law. The result is a relatively simple model whose parameters can all be inferred directly from a combination of in situ and standard undrained laboratory tests. The model is applied to a problem involving the horizontal loading of a monopile foundation for which full scale tests have been previously conducted. The model shows good agreement with the measured data.     

Parallel 3-D Simulation of a Fault Gouge Using the Lattice Solid Model

Despite the insight gained from 2-D particle models, and given that the dynamics of crustal faults occur in 3-D space, the question remains, how do the 3-D fault gouge dynamics differ from those in 2-D? Traditionally, 2-D modeling has been preferred over 3-D simulations because of the computational cost of solving 3-D problems. However, modern high performance computing architectures, combined with a parallel implementation of the Lattice Solid Model (LSM), provide the opportunity to explore 3-D fault micro-mechanics and to advance understanding of effective constitutive relations of fault gouge layers. In this paper, macroscopic friction values from 2-D and 3-D LSM simulations, performed on an SGI Altix 3700 super-cluster, are compared. Two rectangular elastic blocks of bonded particles, with a rough fault plane and separated by a region of randomly sized non-bonded gouge particles, are sheared in opposite directions by normally-loaded driving plates. The results demonstrate that the gouge particles in the 3-D models undergo significant out-of-plane motion during shear. The 3-D models also exhibit a higher mean macroscopic friction than the 2-D models for varying values of interparticle friction. 2-D LSM gouge models have previously been shown to exhibit accelerating energy release in simulated earthquake cycles, supporting the Critical Point hypothesis. The 3-D models are shown to also display accelerating energy release, and good fits of power law time-to-failure functions to the cumulative energy release are obtained.     

Dynamics and fluxes of organic carbon and nitrogen in two Guiana Shield river basins impacted by deforestation and mining activities

Deforestation and mining activities have proven to be very damaging to rivers because these activities disturb the environmental characteristics of rivers. Thus, the concentrations of dissolved organic carbon (DOC), particulate organic carbon (POC), particulate nitrogen (PN), and Chlorophyll‐a (Chl‐a) were measured monthly during 2 hydrological years in the Maroni and Oyapock Rivers to assess the dynamics and fluxes of organic carbon and nitrogen in these 2 Guiana Shield basins, which have been strongly (Maroni) and weakly (Oyapock) impacted by deforestation and mining activities. The 2‐year time series show that DOC, POC, PN, and Chl‐a concentrations vary seasonally with discharge in both rivers, indicating a hydrologically dominated control. Temporal patterns of DOC, POC, and PN indicate that these variables show maximum concentrations in rising waters due to the yield of organic matter and nitrogen accumulated in soils, which are incorporated into the rivers during rainfall. However, the Chl‐a concentrations were at a maximum during low‐water stages. The C/N and C/Chl‐a ratios also showed a seasonal trend, with lower values during the low water periods due to an increase in algal biomass. During high water, the POC in both rivers is the result of terrestrial organic matter, whereas during low‐water autochthonous organic matter can reach up to 34% of the POC. The mean annual fluxes of TOC and PN were higher (4.56 × 10⁵ tonC year^?1 and 1.77 × 10⁴ tonN year^?1, respectively) in the Maroni River than those (1.84 × 10⁵ tonC year^?1 and 0.54 × 10⁴ tonN year^?1, respectively) in the Oyapock River. However, the specific fluxes of DOC, POC, and PN from both basins were nearly the same. Although gold mining activities are performed in both basins, there is no conclusive evidence regarding the impact of these activities on the dynamics of organic matter and particulate nitrogen in the Maroni and Oyapock Rivers.     

Assessment of organotin contamination in marine sediments and biota from the Gulf and adjacent region

Butyltin species were measured in sediments from coastal locations in the Gulf and Gulf of Oman. Both butyltin and phenyltin species were measured in biota samples from four countries in this region. With tributyltin (TBT) concentrations up to 60 ngSng(-1), some sediments could be classified as contaminated (i.e. TBT>1.3 ngSng(-1)), namely Dukhan (Qatar), the BAPCO industrial complex and Askar (Bahrain), and Hilf and the Raysut Port Area (Oman). Higher concentrations of total butyltins were found in oysters relative to fish, but ranging from 6.5 to 488 ngSng(-1) dry weight they are nonetheless relatively low. Diphenyltin and triphenyltin were found in some fish and bivalves from the Gulf, but not in biota from the Gulf of Oman. The environmental levels of organotin species are comparatively low by global standards and pose no immediate public health problems.