Outdoor recreation monitoring in coastal and marine areas – an overview of Nordic experiences and knowledge

This paper involves a collection and communication of important knowledge about and experiences with outdoor recreation monitoring in Nordic coastal and marine areas. This is a topic that so far has received little attention, especially among researchers and practitioners working with outdoor recreation monitoring in Nordic coastal and marine areas, who are in need of knowledge on the topic in order to advance monitoring activities and procedures. To remedy this situation, the purpose of this paper is to provide a knowledge base by listing and describing central literature contributions with important insight into outdoor recreation monitoring in Nordic coastal and marine areas. More specifically, this includes information about: (a) where important knowledge about outdoor recreation monitoring in Nordic coastal and marine areas can be found, (b) who the main contributors are and (c) what monitoring knowledge that has been reported so far. The paper also examines what tasks lie ahead for researchers and area managers in order to improve knowledge about outdoor recreation monitoring in Nordic coastal and marine areas. The paper is a central contribution and addition to manuals on outdoor recreation monitoring that are currently available in the Nordic countries.     

Sea‐level and ocean‐current control on carbonate‐platform growth,Maldives, Indian Ocean

Multichannel high‐resolution seismic and multibeam data were acquired from the Maldives‐isolated carbonate platform in the Indian Ocean for a detailed characterization of the Neogene bank architecture of this edifice. The goal of the research is to decipher the controlling factors of platform evolution, with a special emphasis on sea‐level changes and changes of the oceanic currents. The stacking pattern of Lower to Middle Miocene depositional sequences, with an evolution of a ramp geometry to a flat‐topped platform, reflects variations of accommodation, which here are proposed to be primarily governed by fluctuations of relative sea level. Easterly currents during this stage of bank growth controlled an asymmetric east‐directed progradation of the bank edge. During the late middle Miocene, this system was replaced by a twofold configuration of bank development. Bank growth continued synchronously with partial bank demise and associated sediment‐drift deposition. This turnover is attributed to the onset and/or intensification of the Indian monsoon and related upwelling and occurrence of currents, locally changing environmental conditions and impinging upon the carbonate system. Mega spill over lobes, shaped by reversing currents, formed as large‐scale prograding complexes, which have previously been interpreted as deposits formed during a forced regression. On a regional scale, a complex carbonate‐platform growth can occur, with a coexistence of bank‐margin progradation and aggradation, as well as partial drowning. It is further shown that a downward shift of clinoforms and offlapping geometries in carbonate platforms are not necessarily indicative for a sea‐level driven forced regression. Findings are expected to be applicable to other examples of Cenozoic platforms in the Indo‐Pacific region.     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

Skyline-based registration of 3D laser scans

Acquisition and registration of terrestrial 3D laser scans is a fundamental task in mapping and modeling of cities in three dimensions. To automate this task marker-free registration methods are required. Based on the existence of skyline features, this paper proposes a novel method. The skyline features are extracted from panoramic 3D scans and encoded as strings enabling the use of string matching for merging the scans. Initial results of the proposed method in the old city center of Bremen are pre-sented.     

Integrated and Participatory Research Approaches towards Sustainable Livelihoods and Ecosystems in Mountainous Regions

Mountainous regions cover about 27 per cent of the world’s land surface and are home to some 22 per cent of the global population (UNEP 2002). A much greater number of people depend on mountain environments for a wide range of services, including clean water, energy, timber, biodiversity, recreation, and protection from environmental hazards, such as landslides and floods. At the same time, mountain areas are extremely vulnerable ecosystems and under continuous threat of environmental degrad…     

Long-term soil moisture dynamics derived from GNSS interferometric reflectometry: a case study for Sutherland,South Africa

Soil moisture is a geophysical key observable for predicting floods and droughts, modeling weather and climate and optimizing agricultural management. Currently available in situ observations are limited to small sampling volumes and restricted number of sites, whereas measurements from satellites lack spatial resolution. Global navigation satellite system (GNSS) receivers can be used to estimate soil moisture time series at an intermediate scale of about 1000 m². In this study, GNSS signal-to-noise ratio (SNR) data at the station Sutherland, South Africa, are used to estimate soil moisture variations during 2008–2014. The results capture the wetting and drying cycles in response to rainfall. The GNSS Volumetric Water Content (VWC) is highly correlated (r ² = 0.8) with in situ observations by time-domain reflectometry sensors and is accurate to 0.05 m³/m³. The soil moisture estimates derived from the SNR of the L1 and L2P signals compared to the L2C show small differences with a RMSE of 0.03 m³/m³. A reduction in the SNR sampling rate from 1 to 30 s has very little impact on the accuracy of the soil moisture estimates (RMSE of the VWC difference 1–30 s is 0.01 m³/m³). The results show that the existing data of the global tracking network with continuous observations of the L1 and L2P signals with a 30-s sampling rate over the last two decades can provide valuable complementary soil moisture observations worldwide.     

Reliability checking for GNSS baseline and network processing

Reliability analysis is inseparably connected with the formulation of failure scenarios, and common test statistics are based on specific assumptions. This is easily overlooked when processing observation differences. Poor failure identification performance and misleading pre-analysis results, mainly meaningless minimum detectable biases and external reliability measures, are the consequence. A reasonable failure scenario for use with differenced GNSS observations is formulated which takes into account that individual outliers in the original data affect more than one processed observation. The proper test statistics and reliability indicators are given for use with correlated observations and both batch processing and Kalman filtering. It is also shown that standardized residuals and redundancy numbers fail completely when used with double differenced observations.

A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

The solution topology of galactic winds

The system of ordinary differential equations derived from the hydrodynamical equations of a radially symmetric flow has a one dimensional manifold of critical points if there is mass loading in the flow or if the heating and cooling rates are taken to be independent of the thermodynamic variables as is usual.     

The constancy of galactic cosmic rays as recorded by cosmogenic nuclides in iron meteorites

We measured the He, Ne, and Ar isotopic concentrations and the ¹⁰Be, ²⁶Al, ³⁶Cl, and ⁴¹Ca concentrations in 56 iron meteorites of groups IIIAB, IIAB, IVA, IC, IIA, IIB, and one ungrouped. From ⁴¹Ca and ³⁶Cl data, we calculated terrestrial ages indistinguishable from zero for six samples, indicating recent falls, up to 562 ± 86 ka. Three of the studied meteorites are falls. The data for the other 47 irons confirm that terrestrial ages for iron meteorites can be as long as a few hundred thousand years even in relatively humid conditions. The ³⁶Cl‐³⁶Ar cosmic ray exposure (CRE) ages range from 4.3 ± 0.4 Ma to 652 ± 99 Ma. By including literature data, we established a consistent and reliable CRE age database for 67 iron meteorites. The high quality of the CRE ages enables us to study structures in the CRE age histogram more reliably. At first sight, the CRE age histogram shows peaks at about 400 and 630 Ma. After correction for pairing, the updated CRE age histogram comprises 41 individual samples and shows no indications of temporal periodicity, especially not if one considers each iron meteorite group separately. Our study contradicts the hypothesis of periodic GCR intensity variations (Shaviv 2002, 2003), confirming other studies indicating that there are no periodic structures in the CRE age histogram (e.g., Rahmstorf et al. 2004; Jahnke 2005). The data contradict the hypothesis that periodic GCR intensity variations might have triggered periodic Earth climate changes. The ³⁶Cl‐³⁶Ar CRE ages are on average 40% lower than the ⁴¹K‐K CRE ages (e.g., Voshage 1967). This offset can either be due to an offset in the ⁴¹K‐K dating system or due to a significantly lower GCR intensity in the time interval 195–656 Ma compared to the recent past. A 40% lower GCR intensity, however, would have increased the Earth temperature by up to 2 °C, which seems unrealistic and leaves an ill‐defined ⁴¹K‐K CRE age system the most likely explanation. Finally, we present new ²⁶Al/²¹Ne and ¹⁰Be/²¹Ne production rate ratios of 0.32 ± 0.01 and 0.44 ± 0.03, respectively.