Element signatures of subduction-zone fluids. An experimental study of the element partitioning (Dfluid/rock) of natural partly altered igneous rocks from the ODP drilling site 1,256

The trace element signatures of fluids were investigated by leaching experiments on natural samples of partly altered mafic igneous rocks recovered from the drilling site 1,256 of ODP Leg 206 on the Cocos plate (Central America). Experiments with ultrapure water were performed at 400 °C/0.4 GPa and 500 °C/0.7 GPa. Both fluids and residual solids were examined to obtain the partition coefficients (D^fluid/rock) of various trace elements. Element partition coefficients (D^fluid/rock) obtained at 500 °C/0.7 GPa are significantly lower compared to results obtained at 400 °C/0.4 GPa, which is in contrast to observations at higher pressures (2.2–6 GPa) and temperatures between 700 and 1,400 °C (Kessel et al. in Earth Planet Sci Lett 237: 873–892, 2005a; Spandler et al. in Chem Geol 239: 228–249, 2007). This finding may indicate a considerable pressure effect on the leaching processes and strongly divergent fluid–rock interactions in the upper part of a subduction zone at 0.4–0.7 GPa compared to deeper subduction areas with higher pressures. Furthermore, this may be interpreted as one of the earliest fractionation processes during the subduction of crustal material.     

The provenance of northern Kalahari Basin sediments and growth history of the southern Congo Craton reconstructed by U–Pb ages of zircons from recent river sands

The southern Congo Craton is widely overlain by Meso- to Cenozoic sediments of the northern Kalahari Basin, which hamper any correlation of basement units. The latter are represented by the Archaean Angola and Kasai Blocks, while the southern cratonic margin is framed by several Meso- to Neoproterozoic orogenic belts. For provenance analysis of the sedimentary cover and reconstruction of the main zircon-forming events, we studied zircons from recent sediments of the largest rivers at the southern margin of the Congo Craton. U–Pb zircon ages suggest a major amount of the sediments to originate from E Lufilian and Kibaran Belts, while input from the S Damara Belt seems to increase to the W. Ages related to the Angola Block were only noticed in the westernmost parts of the working area, which is not in accordance with the SE-trending drainage pattern, proposed to have been onset during the Cretaceous. Thus, it is assumed that the Meso- to Cenozoic sedimentary cover extended further west than today prior to the Mesozoic to Neogene uplift of the Angola Block and that subsequent erosion exhumed the basement stepwise from west to east. A recurrent destabilisation of the southern margin of the Congo Craton at ~2.7, 1.9, 1.0 and 0.6 Ga is supposed to be represented by major peaks in the age distribution pattern of the total amount of concordant zircons. This is in accordance with similar studies in adjacent areas. Additionally, the obtained data fit well to several hypothesised major events during the supercontinent cycle.     

http://www.sciencedirect.com/science/article/pii/S1674987114000395

The study of fluid inclusions in high-grade rocks is especially challenging as the host minerals have been normally subjected to deformation, recrystallization and fluid-rock interaction so that primary in- clusions, formed at the peak of metamorphism are rare. The larger part of the fluid inclusions found in metamorphic minerals is typically modified during uplift. These late processes may strongly disguise the characteristics of the ＂original＂ peak metamorphic fluid. A detailed microstructural analysis of the host minerals, notably quartz, is therefore indispensable for a proper interpretation of fluid inclusions. Cathodoluminescence （CL） techniques combined with trace element analysis of quartz （EPMA, LA- [CPMS） have shown to be very helpful in deciphering the rock-fluid evolution. Whereas high-grade metamorphic quartz may have relatively high contents of trace elements like Ti and A1, low- temperature re-equilibrated quartz typically shows reduced trace element concentrations. The result- ing microstructures in CL can be basically distinguished in diffusion patterns （along microfractures and grain boundaries）, and secondary quartz formed by dissolution-reprecipitation. Most of these textures are formed during retrograde fluid-controlled processes between ca. 220 and 500 ℃, i.e. the range of semi-brittle deformation （greenschist-facies） and can be correlated with the fluid inclusions. In this way modified and re-trapped fluids can be identified, even when there are no optical features observed under the microscope.     

On causes and impacts of land subsidence in Bandung Basin, Indonesia

The Bandung Basin is a large intra-montane basin surrounded by volcanic highlands, in western Java, Indonesia, inhabited by more than seven million people. The basin, an area of about 2,300 km², is a highland plateau at approximately 650–700 m above sea level and is surrounded by up to 2,400 m high Late Tertiary and Quaternary volcanic terrain. Based on the results of nine GPS surveys conducted since 2000 up to 2011, it was shown that several locations in the Bandung Basin have experienced land subsidence, with an average rate of about ?8 cm/year and can go up to about ?23 cm/year in certain locations. A hypothesis has been proposed by several studies that land subsidence observed in several locations in the Bandung Basin has been caused mainly by excessive groundwater extraction. It is found that there is a strong correlation between the rates of groundwater level lowering with the GPS-derived rates of land subsidence in several locations in Bandung Basin. The GPS results in this study detected significant subsidence in the textile industry area, where very large volumes of groundwater are usually extracted. The impact of land subsidence in Bandung can be seen in several forms, mainly in the cracking and damage of houses, buildings and infrastructure. Land subsidence also aggravates the flooding in Bandung Basin, which has brought huge economic losses and deteriorated the quality of life and environment in the affected areas.     

An iterative version of the adaptive Gaussian mixture filter

The adaptive Gaussian mixture filter (AGM) was introduced as a robust filter technique for large-scale applications and an alternative to the well-known ensemble Kalman filter (EnKF). It consists of two analysis steps, one linear update and one weighting/resampling step. The bias of AGM is determined by two parameters, one adaptive weight parameter (forcing the weights to be more uniform to avoid filter collapse) and one predetermined bandwidth parameter which decides the size of the linear update. It has been shown that if the adaptive parameter approaches one and the bandwidth parameter decreases, as an increasing function of the sample size, the filter can achieve asymptotic optimality. For large-scale applications with a limited sample size, the filter solution may be far from optimal as the adaptive parameter gets close to zero depending on how well the samples from the prior distribution match the data. The bandwidth parameter must often be selected significantly different from zero in order to make large enough linear updates to match the data, at the expense of bias in the estimates. In the iterative AGM we introduce here, we take advantage of the fact that the history matching problem is usually estimation of parameters and initial conditions. If the prior distribution of initial conditions and parameters is close to the posterior distribution, it is possible to match the historical data with a small bandwidth parameter and an adaptive weight parameter that gets close to one. Hence, the bias of the filter solution is small. In order to obtain this scenario, we iteratively run the AGM throughout the data history with a very small bandwidth to create a new prior distribution from the updated samples after each iteration. After a few iterations, nearly all samples from the previous iteration match the data, and the above scenario is achieved. A simple toy problem shows that it is possible to reconstruct the true posterior distribution using the iterative version of the AGM. Then a 2D synthetic reservoir is revisited to demonstrate the potential of the new method on large-scale problems.     

Instruments, Detectors and the Future of Astronomy with Large Ground Based Telescopes

Results of a survey of instrumentation and detector systems, either currently deployed or planned for use at telescopes larger than 3.5 m, in ground based observatories world-wide, are presented. This survey revealed a number of instrumentation design trends at optical, near, and mid-infrared wavelengths. Some of the most prominent trends include the development of vastly larger optical detector systems (> 10⁹ pixels) than anything built to date, and the frequent use of mosaics of near-infrared detectors – something that was quite rare only a decade ago in astronomy. Some future science applications for detectors are then explored, in an attempt to build a bridge between current detectors and what will be needed to support the research ambitions of astronomers in the future.     

The Qso Hosts I Zw 1 and 3C 48: Prototypes of a Merger-Driven Quasar Evolution?

I Zw 1 and 3C 48 are two neighboring template objects at a later stage of the hypothesized merger-driven evolutionary sequence from ultra-luminous infrared galaxies (ULIRGs) to quasi-stellar objects (QSOs). Since galaxy mergers are assumed to trigger the evolution, it is important to confirm the merger properties of transitionary objects. Using multi-wavelength observations and N-body simulations, the merger histories of I Zw 1 and 3C 48 have been investigated in two separate case studies. Here, the results from both studies are compared and their relevance for the evolutionary hypothesis is discussed.This research is partly based on observations with ISAAC at the Very Large Telescope (VLT) of the European Southern Observatory (ESO) under projects 67.B-0009 and 67.B-0019.     

The evolution of brittle and ductile structures at the surface of a partly debris-covered,rapidly thinning and slowly moving glacier in 1998–2012 (Pasterze Glacier,Austria)

Many glaciers in alpine regions are currently rapidly receding and thinning at historically unobserved rates causing changes in the velocity field and in normal and shear stresses affecting the surface expression of structures within the ice. We studied the distribution of brittle and ductile structures at the surface of Pasterze Glacier during a 14-year period by analysing orthophotos and digital elevation models of five stages (1998, 2003, 2006, 2009 and 2012). A structural glaciological mapping key was applied. Normal faults, strike-slip faults, en échelon structures (systematic stepping of fractures), thrust faults, and band ogives were distinguished. Results indicate substantial deceleration and glacier thinning in 1998–2012. Glacier thinning was not homogenous over time related to the uneven distribution of supraglacial debris causing differential ablation or the selective ablation effects of subglacial water channels. Peculiar supraglacial features observed are circular collapse structures with concentric crevasses which form when the ice between the surface and the roof of water channels decreases. The total length of brittle structures increased from 38.4 km to 56.9 km whereas the extent of the glacier tongue decreased by 25%. The fracture density doubled from 0.009 to 0.018 m/m². Areas of the glacier tongue which were up to 100 m away from the nearest brittle structure increased by 16%. The visual appearance of thrust faults shifted upglacier due to decreasing glacier velocity causing horizontal shortening or due to exhumation of faults that did not previously extend to the surface. A large number of brittle structures are progressively independent from glacier motion. Our study suggests that glacier tongues which are in a state of rapid decay and thinning are prone to fracturing due to normal fault formation and glacier disintegration. Water further increases ablation rates substantially if rather large amounts drain through supra-, en- or subglacial water channels. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Physical and economic bias in climate change research: a scientometric study of IPCC Third Assessment Report

This study demonstrates that IPCC Third Assessment Report is strongly dominated by Natural sciences, especially the Earth sciences. The Social sciences are dominated by Economics. The IPCC assessment also results in the separation of the Earth, Biological and Social sciences. The integration that occurs is mainly between closely related scientific fields. The research community consequently imposes a physical and economic bias and a separation of scientific fields that the IPCC reproduces in the policy sphere. It is argued that this physical and economic bias distorts a comprehensive understanding of climate change and that the weak integration of scientific fields hinders climate change from being fully addressed as an integral environmental and social problem. If climate change is to be understood, evaluated and responded to in its fullness, the IPCC must broaden its knowledge base and challenge the anthropocentric worldview that places humans outside of nature.     

Electromagnetic induction prediction of soil salinity and groundwater properties in a Tunisian Saharan oasis

Abstract

Electromagnetic induction measurements (EM) were taken in a saline gypsiferous soil of the Saharan-climate Fatnassa oasis (Tunisia) to predict the electrical conductivity of saturated soil extract (ECe) and shallow groundwater properties (depth, Dgw, and electrical conductivity, ECgw) using various models. The soil profile was sampled at 0.2 m depth intervals to 1.2 m for physical and chemical analysis. The best input to predict the log-transformed soil salinity (lnECe) in surface (0–0.2 m) soil was the EMh/EMv ratio. For the 0–0.6 m soil depth interval, the performance of multiple linear regression (MLR) models to predict lnECe was weaker using data collected over various seasons and years (R _a ² = 0.66 and MSE = 0.083 dS m^-1) as compared to those collected during the same period (R _a ² = 0.97, MSE = 0.007 dS m^-1). For similar seasonal conditions, for the Dgw–EMv relationship, R ² was 0.88 and the MSE was 0.02 m for Dgw prediction. For a validation subset, the R ² was 0.85 and the MSE was 0.03 m. Soil salinity was predicted more accurately when groundwater properties were used instead of soil moisture with EM variables as input in the MLR.

Editor D. Koutsoyiannis; Associate editor K. Heal

Citation Bouksila, F., Persson, M., Bahri, A., and Berndtsson, R., 2012. Electromagnetic induction predictions of soil salinity and groundwater properties in a Tunisian Saharan oasis. Hydrological Sciences Journal, 57 (7), 1473–1486.