Fine-Scale Measurements Of Turbulence In The Lower Troposphere: An Intercomparison Between A Kite- And Balloon-Borne, And A Helicopter-Borne Measurement System

Two state-of-the-art, high-resolution, in situ turbulence measurement systems, which can be deployed at altitudes well above the atmospheric surface layer, are compared: the Tethered Lifting System (TLS) of the Cooperative Institute for Research in Environmental Sciences (CIRES)at the University of Colorado, Boulder, Colorado, and the helicopter-borneturbulence measurement system HELIPOD of the Technical UniversityBraunschweig, Germany, and the University of Hanover, Germany. Whilethe CIRES TLS is a fixed-point platform, HELIPOD is a moving platform.On the basis of data taken with the two systems in separate field campaigns,the system capabilities are quantified and discussed. Criteria for instrumentalrequirements are presented. It is shown that both the CIRES TLS and HELIPODare well suited for measuring fine-scale turbulence that is characterized by very small temperature structure parameters 10⁶ K² m^–2/3 and smaller) and very small energy dissipation rates (10^-7 m² s^-3 and smaller). The authors are not aware of any other turbulence measurement systems that have similar capabilities and can be deployed at altitudes of up to several kilometres. The HELIPOD is ideal for high-resolution horizontal measurements while the TLS is ideal for high-resolution vertical measurements using multiple sensors attached to a suspended line.     

VELOCITY FIELD AND RESISTANCE OF FLOW OVER ROUGH SURFACES WITH LARGE AND SMALL RELATIVE SUBMERGENCE

LINTRODUCTIONPreciseknowledgeofthevelocityfieldandthecorrespondingresistanceofflowoverrollghsurfacesareofgreatimportanceformanypracticalproblemssuchastheestimationofthestabilitVofbedmaterialinerosiveriversortheremovalofaccumulatedfinesedimentfromthechannelandthelooseningofgravelbedmaterialbycontrolledreleaseofreservoirwater.Thelatterprocedure,calledflushingflows,isfrequentlyspecifiedtorestoreortomaintainaquatichabitat(WILCOCKetal.,1996).Dependingonwaterdepthhandroughnessheightk.(=equiv…     

Sediment-chemistry response to land-use change and pollutant loading in a hypertrophic lake, southern Sweden

Responses to recent land-use changes and pollutant loading in the sediment of a hypertrophic lake in southern Sweden were studied by comparison of geochemical, pollen and magnetic records with historical land-use data. A chronology was constructed for the last two centuries by correlating changes in the pollen diagram to major events in the land-use history. Sediment accumulation was low (mean c. 0.2 g cm^-2 yr^-1) prior to 1800 AD, when less than 25% of the catchment was arable land. Reorganization of the agrarian system during the 19th century increased the annually tilled area by 300%, which accelerated soil erosion and substantially increased the accumulation of allochtonous matter in the lake. Since the turn of the century 90% of the catchment has been ploughed every year. The deposition of clastic matter in the lake has, however, decreased due to a gradual rerouting of the drainage system, which has reduced the effective catchment area by c. 85%.Authigenic vivianite (Fe3(PO4)2.8H2O) is a major P phase in the preindustrial non-sulphidic sediments, which suggests that the sediments at that time served as a fairly efficient sink for P. The arable expansion, increased manuring and, eventually, the introduction of artificial fertilizers during the 19th century led to a massive influx of nutrients, which elevated primary production in the lake. Subsequent development of bottom water anoxia around 1900, in combination with an additional pollutant burden of sulphate within the lake basin, led to major alterations of the biogeochemical cycles. The most critical change in the post-1900 sediments involved the cycling of Fe and P. The linkage between the lacustrine P and Fe cycles can explain that FeS formation was paralleled by a release of P from the sedimentary pool. This supply of P to the lake basin must have supplemented the nutrient supply by modern agriculture and contributed to recent hypertrophication. The bacterial sulphate reduction also affected the generation of alkalinity which supported a significant calcite precipitation in the post-1900 sediments.S is enriched 10-fold in the post-1900 sediments compared to preindustrial values. Along with the rise in S, soot particles derived from fossil fuel combustion appear in the sediments for the first time. Therefore, Bussj¨osj¨on is thought to be a good example of how a well-buffered, highly productive lake may respond to the pollution by sulphur from acid rain.     

Low frequency acoustic emission from quartz upon heating from 90 to 610° C

Acoustic emission (AE) from quartz during heating was measured with a high resolution decrepitometer on more than 350 samples from various conditions of formation and geological settings. The emitted acoustic signals can accumulate in very sharp peaks or extend over a wide temperature range. Different types and conditions of quartz formation can be distinguished from total counts and individual AE-patterns. Correlation of the determined AE peaks with microthermometric investigations, optical and scanning electron microscopical (SEM) studies of polished and etched thin sections showed that the sound, generated during heating, is caused by several distinguishable mechanisms. The main cause is the thermal expansion mismatch and thermal anisotropy of the quartz. In all cases the sound is emitted from opening and propagating microcracks. At temperatures below 380° C the main sources of AE are the rupture of grain boundaries, transgranular fracturing and decrepitation of large fluid inclusions. In the temperature range of 350–550° C, intragranular fracturing, sometimes enhanced by Brasil twinning, and reopening of healed fissures, often decorated with large numbers of small secondary fluid inclusions, cause distinct peaks of acoustic emission. At the α-β inversion temperature (≈ 573° C) massive emission of sound occurs if the quartz is twinned according to the Dauphiné law. Measurement of AE can help to determine critical temperatures of material failure and reveal information on the residual strain in rocks. Different generations of quartz veins can be distinguished, even if covered by soil and the extent of alteration zones can be determined by the varying AE patterns.     

Modular development of an inline monitoring system for waterborne pathogens in raw and drinking water

The state-of-the-art monitoring of drinking water hygiene is based on the cultivation and enumeration of indicator bacteria. Despite its proven reliability, this approach has the disadvantages of being (a) relatively slow and (b) limited to a small number of indicator bacteria. Ideally, alternative methods would be less time-consuming while providing information about a larger set of hygienically relevant microorganisms including viruses. In this paper, we present insights into the design of a modular concentration and detection system for bacteria, bacteriophages and viruses. Following further validation, this or similar techniques have the potential to extend and speed up the monitoring of raw and drinking water hygiene in the future. The system consists of different modules for the concentration of microorganisms, an amplification and detection unit that includes a module for the differentiation between live and dead microorganisms, and an automated system for decision support and self-diagnosis. The ongoing testing under controlled laboratory conditions and real-life conditions in the water supply industry yields further system improvements. Moreover, the increased sensitivity and broader range of microbiological parameters emphasize the need for a reconsideration of the currently used criteria for the assessment of (drinking) water hygiene.     

Geometry of growth strata in a transpressive fold belt in field and analogue model: Gosau Group at Muttekopf,Northern Calcareous Alps,Austria

The thrust sheets of the Northern Calcareous Alps were emplaced during Late Cretaceous thrust‐dominated transpression expressed by thrust sheets segmented by closely spaced tear faults. Thrust sheet‐top sediments were deposited during thrusting and associated fold growth and were controlled by active folding and tearing. We observe two types of angular unconformities: (1) Angular unconformities above folds between tear faults conform with the model of progressive unconformities. Across these unconformities dip decreases upsection. (2) Here, we define progressive unconformities that are related to tear faults and are controlled by both folding and tearing. Across these unconformities both strike and dip change. In growth strata overlying folds dissected by high‐angle faults, such unconformities are expected to be common. We used analogue modelling to define the geometry of the tear faults and related unconformities. Within the syn‐tectonic sediments, a steep, upward flattening thrust within a broader, roughly tulip‐shaped drag zone develops. The thrust roots in the tear fault in pre‐tectonic deposits and is curved upward toward the downthrown block. Vertical offset on the thrust is related to differential vertical uplift caused by, for example, growth of folds with different wavelength and amplitude on either side of the tear fault. Formation of progressive unconformities is governed by the relationship between the rates of deposition and vertical growth of a structure. Fault‐related progressive unconformities are additionally controlled by the growth of the vertical step across the tear fault. When the rates of vertical growth of two neighbouring folds separated by a tear fault are similar, the rate of growth across the tear fault is small; if the first differ, the latter is high. Episodic tear fault activity may create several angular unconformities attached to a tear fault or allow the generation of angular unconformities near tear faults in sedimentary systems that have a rate of deposition too high to generate classical progressive unconformities between the tear faults.