Deformation microstructures in experimentally deformed Maryland diabase

Experimentally deformed Maryland diabase has been examined using the transmission electron microscope in order to determine the mechanisms of deformation operative over a range of temperatures and pressures and thereby aid in the interpretation of polyphase flow data. Deformation mechanisms within the plagioclase and clinopyroxene of the diabase have been compared to those within monomineralic aggregates of these phases deformed at the same conditions. Both phases deform by microfracturing, mechanical twinning, and intracrystalline slip.Data for the monomineralic aggregates show that plagioclase is stronger than clinopyroxene at <800°C, but weaker at ≥ 800°C, for a pressure of 15 kbar and strain rate of 10^?6/sec. Observations of the diabase are consistent with this result: at < 800°C, the plagioclase and pyroxene grains are about equally strained, whereas at ≥ 800°C, almost all of the sample strain is accommodated by the plagioclase, the more continuous phase.     

Zircon M127 – A Homogeneous Reference Material for SIMS U–Pb Geochronology Combined with Hafnium,Oxygen and,Potentially, Lithium Isotope Analysis

In this article, we document a detailed analytical characterisation of zircon M127, a homogeneous 12.7 carat gemstone from Ratnapura, Sri Lanka. Zircon M127 has TIMS‐determined mean U–Pb radiogenic isotopic ratios of 0.084743 ± 0.000027 for ²⁰⁶Pb/²³⁸U and 0.67676 ± 0.00023 for ²⁰⁷Pb/²³⁵U (weighted means, 2s uncertainties). Its ²⁰⁶Pb/²³⁸U age of 524.36 ± 0.16 Ma (95% confidence uncertainty) is concordant within the uncertainties of decay constants. The δ¹⁸O value (determined by laser fluorination) is 8.26 ± 0.06‰ VSMOW (2s), and the mean ¹⁷⁶Hf/¹⁷⁷Hf ratio (determined by solution ICP‐MS) is 0.282396 ± 0.000004 (2s). The SIMS‐determined δ⁷Li value is ?0.6 ± 0.9‰ (2s), with a mean mass fraction of 1.0 ± 0.1 μg g^?1 Li (2s). Zircon M127 contains ~ 923 μg g^?1 U. The moderate degree of radiation damage corresponds well with the time‐integrated self‐irradiation dose of 1.82 × 10¹⁸ alpha events per gram. This observation, and the (U–Th)/He age of 426 ± 7 Ma (2s), which is typical of unheated Sri Lankan zircon, enable us to exclude any thermal treatment. Zircon M127 is proposed as a reference material for the determination of zircon U–Pb ages by means of SIMS in combination with hafnium and stable isotope (oxygen and potentially also lithium) determination.     

http://www.sciencedirect.com/science/article/pii/S1674987114000395

The study of fluid inclusions in high-grade rocks is especially challenging as the host minerals have been normally subjected to deformation, recrystallization and fluid-rock interaction so that primary in- clusions, formed at the peak of metamorphism are rare. The larger part of the fluid inclusions found in metamorphic minerals is typically modified during uplift. These late processes may strongly disguise the characteristics of the ＂original＂ peak metamorphic fluid. A detailed microstructural analysis of the host minerals, notably quartz, is therefore indispensable for a proper interpretation of fluid inclusions. Cathodoluminescence （CL） techniques combined with trace element analysis of quartz （EPMA, LA- [CPMS） have shown to be very helpful in deciphering the rock-fluid evolution. Whereas high-grade metamorphic quartz may have relatively high contents of trace elements like Ti and A1, low- temperature re-equilibrated quartz typically shows reduced trace element concentrations. The result- ing microstructures in CL can be basically distinguished in diffusion patterns （along microfractures and grain boundaries）, and secondary quartz formed by dissolution-reprecipitation. Most of these textures are formed during retrograde fluid-controlled processes between ca. 220 and 500 ℃, i.e. the range of semi-brittle deformation （greenschist-facies） and can be correlated with the fluid inclusions. In this way modified and re-trapped fluids can be identified, even when there are no optical features observed under the microscope.     

Element signatures of subduction-zone fluids. An experimental study of the element partitioning (Dfluid/rock) of natural partly altered igneous rocks from the ODP drilling site 1,256

The trace element signatures of fluids were investigated by leaching experiments on natural samples of partly altered mafic igneous rocks recovered from the drilling site 1,256 of ODP Leg 206 on the Cocos plate (Central America). Experiments with ultrapure water were performed at 400 °C/0.4 GPa and 500 °C/0.7 GPa. Both fluids and residual solids were examined to obtain the partition coefficients (D^fluid/rock) of various trace elements. Element partition coefficients (D^fluid/rock) obtained at 500 °C/0.7 GPa are significantly lower compared to results obtained at 400 °C/0.4 GPa, which is in contrast to observations at higher pressures (2.2–6 GPa) and temperatures between 700 and 1,400 °C (Kessel et al. in Earth Planet Sci Lett 237: 873–892, 2005a; Spandler et al. in Chem Geol 239: 228–249, 2007). This finding may indicate a considerable pressure effect on the leaching processes and strongly divergent fluid–rock interactions in the upper part of a subduction zone at 0.4–0.7 GPa compared to deeper subduction areas with higher pressures. Furthermore, this may be interpreted as one of the earliest fractionation processes during the subduction of crustal material.     

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.     

Early Jurassic rift structures associated with the Soapaga and Boyacá faults of the Eastern Cordillera, Colombia: Sedimentological inferences and regional implications

The NW-trending Bucaramanga fault links, at its southern termination, with the Soapaga and Boyacá faults, which by their NW trend define an ample horsetail structure. As a result of their Neogene reactivation as reverse faults, they bound fault-related anticlines that expose the sedimentary fill of two Early Jurassic rift basins. These sediments exhibit the wedge-like geometry of rift fills related to west-facing normal faults. Their structural setting was controlled further by segmentation of the bounding faults at approximately 10 km intervals, in which each segment is separated by a transverse basement high. Isopach contours and different facies associations suggest these transverse anticlines may have separated depocenters of their adjacent subbasins, which were shaped by a slightly different subsidence history and thereby decoupled. The basin fill of the relatively narrow basin associated with the Soapaga fault is dominated by fanglomeratic successions organized in two coarsening-upward cycles. In the larger basin linked to the Boyacá fault, the sedimentary fill consists of two coarsening-upward sequences that, when fully developed, vary from floodplain to alluvial fan deposits. These Early Jurassic rift fills temporally constrain the evolution of the Bucaramanga fault, which accommodated right-lateral displacement during the early Mesozoic rift event.     

Transfer and early diagenesis of biogenic silica oxygen isotope signals during settling and sedimentation of diatoms in a temperate freshwater lake (Lake Holzmaar, Germany)

We have investigated the transfer of oxygen isotope signals of diatomaceous silica (δ¹⁸O_diatom) from the epilimnion (0-7 m) through the hypolimnion to the lake bottom (∼20 m) in freshwater Lake Holzmaar, Germany. Sediment-traps were deployed in 2001 at depths of 7 and 16 m to harvest fresh diatoms every 28 days. The 7 m trap collected diatoms from the epilimnion being the main zone of primary production, while the 16 m trap collected material already settled through the hypolimnion. Also a bottom sediment sample was taken containing diatom frustules from approximately the last 25 years. The δ¹⁸O_diatom values of the 7 m trap varied from 29.4‰ in spring/autumn to 26.2‰ in summer according to the temperature dependence of oxygen isotope fractionation and represent the initial isotope signal in this study. Remarkably, despite the short settling distance δ¹⁸O_diatom values of the 7 and the 16 m trap were identical only during spring and autumn seasons while from April to September δ¹⁸O_diatom values of the 16 m trap were roughly ∼1.5‰ enriched in ¹⁸O compared to those of the 7 m trap. Isotopic exchange with the isotopically lighter water of the hypolimnion would shift the δ¹⁸O_diatom value to lower values during settling from 7 to 16 m excluding this process as a cause for the deviation. Dissolution of opal during settling with intact organic coatings of the diatom cells and near neutral pH of the water should only cause a minor enrichment of the 16 m values. Nevertheless, opal from the bottom sediment was found to be 2.5‰ enriched in ¹⁸O compared to the weighted average of the opal from the 7 m trap. Thus, resuspension of bottom material must have contributed to the intermediate δ¹⁸O_diatom signal of the 16 m trap during summer. Dissolution experiments allowed further investigation of the cause for the remarkably enriched δ¹⁸O_diatom value of the bottom sediment. Experiments with different fresh diatomaceous materials show an increase of opaline ¹⁸O at high pH values which is remarkably reduced when organic coatings of the cells still exist or at near neutral pH. In contrast, high pH conditions do not affect the δ¹⁸O_diatom values of sub-fossil and even fossil opal. IR analyses show that the ¹⁸O enrichment of the sedimentary silica is associated with a decrease in Si-OH groups and the formation of Si-O-Si linkages. This indicates a silica dehydroxylation process as cause for the isotopic enrichment of the bottom sediment. Silica dissolution and dehydroxylation clearly induce a maturation process of the diatom oxygen isotope signal presumably following an exponential behaviour with a rapid initial phase of signal alteration. The dynamics of this process is of particular importance for the quantitative interpretation of sedimentary δ¹⁸O_diatom values in terms of palaeothermometry.     

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.     

Melt extraction pathways and stagnation depths beneath the Madeira and Desertas rift zones (NE Atlantic) inferred from barometric studies

The Madeira and Desertas Islands (eastern North Atlantic) show well-developed rift zones which intersect near the eastern tip of Madeira (São Lourenço peninsula). We applied fluid inclusion barometry and clinopyroxene-melt thermobarometry to reconstruct levels of magma stagnation beneath the two adjacent rifts and to examine a possible genetic relationship during their evolution. Densities of CO₂-dominated fluid inclusions in basanitic to basaltic samples from São Lourenço yielded frequency maxima at pressures of 0.57–0.87 GPa (23–29 km depth) and 0.25–0.32 GPa (8–10 km), whereas basanites, basalts and xenoliths from the Desertas indicate 0.3–0.72 GPa (10–24 km) and 0.07–0.12 GPa (2–3 km). Clinopyroxene-melt thermobarometry applied to Ti-augite phenocryst rim and glass/groundmass compositions indicates pressures of 0.45–1.06 GPa (15–35 km; São Lourenço) and 0.53–0.89 GPa (17–28 km; Desertas Islands) which partly overlap with pressures indicated by fluid inclusions. We interpret our data to suggest a multi-stage magma ascent beneath the Madeira Archipelago: main fractionation occurs at multiple levels within the mantle (>15 km depth) and is followed by temporary stagnation within the crust prior to eruption. Depths of crustal magma stagnation beneath São Lourenço and the Desertas differ significantly, and there is no evidence for a common shallow magma reservoir feeding both rift arms. We discuss two models to explain the relations between the two adjacent rift systems: Madeira and the Desertas may represent either a two-armed rift system or two volcanic centres with separate magma supply systems. For petrological and volcanological reasons, we favour the second model and suggest that Madeira and the Desertas root in distinct regions of melt extraction. Magma focusing into the Desertas system off the hotspot axis may result from lithospheric bending caused by the load of the Madeira and Porto Santo shields, combined with regional variations in melt production due to an irregularly shaped plume.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: J. Hoefs