Weathering of granite in Antarctica: II. Thermal stress at the grain scale

Granular disintegration has long been recognized and referred to in weathering texts from all environments, including the Antarctic. Despite this universal identification and referral, few to no data exist regarding thermal conditions at this scale and causative mechanisms remain little more than conjecture. Here, as part of a larger weathering study, thermal data of individual grains (using infrared thermometry and ultra‐fine thermocouples) composing a coarse granite, as well as the thermal gradients in the outer 10 cm (using thermistors), were collected from a north‐facing exposure. Measurements were also made regarding the surface roughness of the rock. Based on recorded temperatures, the nature of the rock surface and the properties of the minerals, an argument is made for complex stress fields that lead to granular disintegration. Mineral to mineral temperature differences found to occur were, in part, due to the changing exposure to solar radiation through the day (and through seasons). Because the thermal conductivity and the coefficient of thermal expansion of quartz are not equal in all directions, coupled with the vagaries of heating, this leads to inter‐granular stresses. Although fracture toughness increases with a decrease in temperature, it is suggested that the tensile forces resulting from falling temperatures are able to exceed this and produce granular disassociation. The lack of equality with respect to crystal axis of both thermal conductivity and expansion in quartz further exacerbates the propensity to failure. Grain size and porosity also influence the thermal stresses and may help explain why some grains are held in place despite disassociation near the surface. While the data presented here appear to beg more questions than providing answers, they do provide a basis for better, more detailed studies of this important weathering scale. Copyright © 2007 John Wiley & Sons, Ltd.     

Verification of tropical cyclone deposits with oxygen isotope analyses of coeval ostracod valves

Reconstruction of prehistoric tropical cyclone (TC) activity often relies on the identification of distinctive overwash deposits (tempestites) in coastal lagoon sediments. Similar sediment deposits, however, can result from high-energy events other than TCs. In this study we assessed the utility of using the geochemistry of ostracod valves, specifically their stable oxygen isotope composition (δ¹⁸O), as a potential validation variable that could reduce the chances of misidentifying an overwash deposit as having been generated by a TC, when in fact it formed from another high-energy depositional process (type 1 error). We applied this technique to a sediment core recovered from Laguna Alejandro, Dominican Republic, which had already been analyzed for other sedimentary TC proxies. Negative δ¹⁸O anomalies identified in the ostracod valve stable isotope record are associated with TC deposits and are most easily explained by large influxes of ¹⁸O-depleted meteoric waters typical of intense tropical storms. There is potential for this technique to be used to identify TC landfalls that are not represented by overwash deposits. We, however, propose a more conservative approach and suggest this technique be used to validate the origin of a storm deposit and reduce the odds of a type 1 error.     

The Italian guidelines for seismic risk classification of constructions: technical principles and validation

The Italian “Guidelines for the seismic risk classification of constructions” approved in February 2017 define the technical principles for exploiting tax deductions with respect to seismic strengthening interventions on existing buildings (Sismabonus). Tax deductions represent a unique opportunity to improve the seismic safety of the existing Italian building stock. The guidelines are very simple and allow practitioners to deal with the sophisticated concepts behind modern seismic design, such as expected annual losses (EAL) and repair costs (expressed as a fraction of the Reconstruction Cost: %RC). The seismic risk classes of buildings and the class upgrade due to strengthening interventions can be assessed using the principles included in the guidelines. The seismic risk class is the minimum between the class defined by the building safety index at the ultimate limit state and the one related to the EAL. The latter class depends on the area under the curve of the expected losses, which is easily obtained by computing the safety index converted in the return period (annual frequency) at different limit states and the relevant %RC. This paper illustrates the technical principles at the base of the guidelines and the procedure used to calibrate the repair costs associated with the different limit states using the actual repair costs monitored in the reconstruction process following recent Italian earthquakes. Finally, simple tools to estimate the cost of the strengthening interventions to improve the seismic capacity at the life-safety limit states are provided.     

Numerical Modelling of the Anisotropic Mechanical Behaviour of Opalinus Clay at the Laboratory-Scale Using FEM/DEM

The Opalinus Clay (OPA) is an argillaceous rock formation selected to host a deep geologic repository for high-level nuclear waste in Switzerland. It has been shown that the excavation damaged zone (EDZ) in this formation is heavily affected by the anisotropic mechanical response of the material related to the presence of bedding planes. In this context, the purpose of this study is twofold: (i) to illustrate the new developments that have been introduced into the combined finite-discrete element method (FEM/DEM) to model layered materials and (ii) to demonstrate the effectiveness of this new modelling approach in simulating the short-term mechanical response of OPA at the laboratory-scale. A transversely isotropic elastic constitutive law is implemented to account for the anisotropic elastic modulus, while a procedure to incorporate a distribution of preferentially oriented defects is devised to capture the anisotropic strength. Laboratory results of indirect tensile tests and uniaxial compression tests are used to calibrate the numerical model. Emergent strength and deformation properties, together with the simulated damage mechanisms, are shown to be in strong agreement with experimental observations. Subsequently, the calibrated model is validated by investigating the effect of confinement and the influence of the loading angle with respect to the specimen anisotropy. Simulated fracture patterns are discussed in the context of the theory of brittle rock failure and analyzed with reference to the EDZ formation mechanisms observed at the Mont Terri Underground Research Laboratory.     

Micro-seismic monitoring after the shipwreck of the Costa Concordia at Giglio Island (Italy)

A micro-seismic network was used for monitoring the wreck of the Costa Concordia cruise ship, wrecked and run agrounded along the Giglio Island coasts during the night of 13 January 2012, until its removal. The seismic traces were processed by means of real-time and “a posteriori” procedures to detect transients that could be ascribed to wreck movements on the sea bed to integrate this information in an early warning system for assessing the wreck stability. After a first discrimination of the transients using amplitude criteria we proceeded to the localization of the detected signals to focus the attention only on the transients originated in the shipwreck resting area. The results showed that most of the events localized on the wreck were likely related to human work activities or sudden internal brittle failure but not to displacements on the seafloor. Instead, the displacements are associated to the impact on the vessel of great sea storms which approach were well correlated with the increasing seismic noise at low frequency. The carried out procedures based on this unique dataset represent an opportunity to test seismic monitoring techniques also in not usual engineering context to support emergency management activities.     

It’s Time To Learn About Learning: Where Should the Environmental and Natural Resource Governance Field Go Next?

This Commentary reflects on the state of the scholarship on learning for environmental and natural resource policy and governance. How have we been learning about learning? We highlight theoretical and empirical advancements related to learning, as well as areas of divergence between learning theories and frameworks, and underdeveloped knowledge around processes and outcomes. To address these limitations and improve progress in both theory and practice, we offer recommendations for learning scholarship by focusing on how to collectively engage in ‘learning about learning’.     

Polyphase thrusting and dyke emplacement in the central Southern Alps (Northern Italy)

The Triassic succession of the central Southern Alps (Italy) is stacked into several units bounded by south-verging low-angle thrust faults, which are related to two successive steps of crustal shortening. The thrust surfaces are cut by high-angle extensional and strike-slip faults, which controlled the emplacement of hypabissal magmatic intrusions that post-date thrusts motions. Intrusion ages based on SHRIMP U–Pb zircon dating span between 42 ± 1 and 39 ± 1 Ma, suggesting close time relationships with the earliest Adamello intrusion stages and, more in general, with the widespread calc-alkaline magmatism described in the Southern Alps. Fission-track ages of magmatic apatites are indistinguishable from U–Pb crystallization ages of zircons, suggesting that the intrusion occurred in country rocks already exhumed above the partial annealing zone of apatite (depth < 2–4 km). These data indicate that the central Southern Alps were already structured and largely exhumed in the Middle Eocene. Although we describe minor faults affecting magmatic bodies and local reactivations of older structures, no major internal deformations have occurred in the area after the Bartonian. Neogene deformations were instead concentrated farther south, along the frontal part of the belt.     

Comparing palaeolimnological and instrumental evidence of climate change for remote mountain lakes over the last 200 years

This paper compares the palaeolimnological evidence for climate change over the last 200 years with instrumental climate data for the same period at seven European remote mountain lakes. The sites are Øvre Neådalsvatn (Norway), Saanajärvi (Finland), Gossenköllesee (Austria), Hagelseewli (Switzerland), Jezero v Ledvici (Slovenia), Estany Redó (Spain, Pyrenees), and Niné Terianske Pleso (Slovakia). We used multiple regression analysis to transfer homogenised lowland air temperature records to each of the sites, and these reconstructions were validated using data from on-site automatic weather stations. These data showed that mean annual temperature has varied over the last 200 years at each site by between 1 and 2 °C, typical of the high frequency variability found throughout the Holocene, and appropriate, therefore, to test the sensitivity of the various proxy methods used. Sediment cores from each site were radiometrically dated using ²¹⁰Pb, ¹³⁷Cs and ²⁴¹Am and analysed for loss-on-ignition, C, N, S, pigments, diatoms, chrysophytes, Cladocera and chironomids. Comparisons between the proxy data and the instrumental data were based on linear regression analysis with the proxy data treated as response variables and the instrumental data (after smoothing using LOESS regressions) as predictor variables. The results showed few clear or consistent patterns with generally low or very low r² values. Highest values were found when the data were compared after smoothing using a broad span, indicating that some of the proxy data were capturing climate variability but only at a relatively coarse time resolution. Probable reasons for the weak performance of the methods used include inaccurate dating, especially for earlier time periods, the influence of confounding forcing factors at some sites e.g., air pollution, earthquakes, and the insensitivity of some methods to low amplitude climate forcing. Nevertheless, there were trends in some proxy records at a number of sites that had a relatively unambiguous correspondence with the instrumental climate records. These included organic matter and associated variables (C and N) and planktonic diatom assemblages at the majority of sites and chrysophytes and chironomids at a few sites. Overall for longer term studies of the Holocene, these results indicate the need to be cautious in the interpretation of proxy records, the importance of proxy method validation, the continuing need to use reinforcing multi-proxy approaches, and the need for careful site and method selection.