Flow time estimation with spatially variable hillslope velocity in ungauged basins

The automated spatial estimation of the hillslope runoff dynamics is used as a valuable tool for the estimation of the travel time distribution (flow time), a major factor for the hydrologic prediction in ungauged basins. In fact, while the flow time function is usually obtained by rescaling the flow paths with constant channel and hillslope velocities, in this work a spatially distributed kinematic component, as a function of terrain features and in particular slope and land use, is implemented and its influence on the hydrologic response is tested by means of the Width Function Instantaneous Unit Hydrograph (WFIUH) framework. Hillslope surface flow velocities are evaluated by applying different uniform flow formulas within an automated DEM-based (terrain analysis) algorithm. A comparison test of the performances of the Manning, Darcy, Maidment and Soil Conservation Service uniform flow equations is performed for several case studies in Italy pertaining to different climatic and geomorphic conditions. Results provide new insights for a better understanding of the flow time function also introducing a more parsimonious and physically-based calibration scheme of the WFIUH.     

Reporting negative results to stimulate experimental hydrology: discussion of “The role of experimental work in hydrological sciences – insights from a community survey”*

ABSTRACT

Experimental work in hydrology is in decline. Based on a community survey, Blume et al. showed that the hydrological community associates experimental work with greater risks. One of the main issues with experimental work is the higher chance of negative results (defined here as when the expected or wanted result was not observed despite careful experimental design, planning and execution), resulting in a longer and more difficult publishing process. Reporting on negative results would avoid putting time and resources into repeating experiments that lead to negative results, and give experimental hydrologists the scientific recognition they deserve. With this commentary, we propose four potential solutions to encourage reporting on negative results, which might contribute to a stimulation of experimental hydrology.     

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).     

2012 Emilia earthquake,Italy: reinforced concrete buildings response

Data of the Italian National Institute of Statistics are collected aimed at characterizing Reinforced Concrete (RC) building stock of the area struck by the 2012 Emilia earthquake (number of storeys, age of construction, structural typology). Damage observations, collected right after the event in reconnaissance reports, are shown and analyzed emphasizing typical weaknesses of RC buildings in the area. The evolution of seismic classification for Emilia region and RC buildings’ main characteristics represent the input data for the assessment of non-structural damage of infilled RC buildings, through a simplified approach (FAST method), based on EMS-98 damage scale. Peak Ground Acceleration (PGA) capacities for the first three damage states of EMS-98 are compared with registered PGA in the epicentral area. Observed damage and damage states evaluated for the PGA of the event, in the epicentral area, are finally compared. The comparison led to a fair agreement between observed and numerical data.     

Linking foraging behavior and diet in a diving seabird

Foraging behavior and diet of breeding seabirds may be analysed simultaneously with the combined use of remote sensing devices and stable isotope analysis. Imperial shag, Phalacrocorax atriceps, breeding at Punta León colony, Argentina, were equipped with global positioning system (GPS) loggers to record foraging trips and blood samples were taken after removal of the devices in order to analyse their nitrogen and carbon stable isotope composition in whole blood and plasma. Whole blood was correlated to plasma isotopic composition for each individual (n = 35), linking diet in the short and medium term. Sexes did not differ in isotopic signatures. The maximum distance reached and the total number of dives that individuals made on two consecutive foraging trips were correlated to their plasma nitrogen isotopic signature. Individuals that went further from the colony and dived fewer times presented more positive signatures, indicative of benthic prey consumption (e.g. Raneya brasiliensis). Diet was predominantly benthic with some individuals incorporating pelagic prey (Engraulis anchoita) and even cephalopods (Octopus tehuelchus). Within breeding pairs (n = 9), different combinations of foraging and prey preferences were observed. Estimated trophic levels of these individuals were similar to those of the same species in other colonies further south along the Patagonian coast.     

An aromatase inhibitor and tamoxifen decrease plasma levels of o,p'-DDT and its metabolites in Nile tilapia (Oreochromis niloticus)

The objective of this study was to determine if tamoxifen or an aromatase inhibitor (4-hydroxyandrostenedione; 4-OHA) affected plasma concentrations of o,p' -DDT and its metabolites, o,p'-DDD and o,p'-DDE, in mature tilapia. Male and female tilapia were injected 6 times intraperitoneally with o,p'-DDT (40 mg/kg) alone or in combination with 4-OHA (2 mg/kg) over a 12 day period. An additional group of male fish was injected with tamoxifen (5 mg/kg) plus o,p'-DDT. At the end of the treatment period, plasma samples were extracted and analyzed by GC/ECD. Females injected only with o,p'-DDT had significantly higher levels of o,p'-DDT compared with males. Interestingly, females and males treated concomitantly with o,p'-DDT and 4-OHA or tamoxifen had significantly lower concentrations of plasma o,p'-DDT (about 50%) compared with fish treated with only o,p'-DDT. These initial results suggest that an interaction between endocrine-active compounds occurs in vivo in tilapia and may involve alterations in metabolism of o,p'-DDT.     

Acoustic core logging in blast-damaged rock

Thill, R.E. and D' Andrea, D. V., 1975. Acoustic core logging in blast-damaged rock. Eng. Geol., 10: 13–36.The Bureau of Mines, in cooperation with the Duval Corp., conducted a blast-fragmentation experiment to determine the feasibility of preparing a porphyry copper-molybdenum deposit for in-situ leaching. The blast was designed with ten 9-inch-diameter blastholes to depths of 110 feet in an equilateral triangle configuration; spacings between blastholes were 15, 20, and 25 ft. One of the major problems in the experiment was in assessing blast damage. Acoustic core-logging equipment and methods were devised and used as one approach in solving this problem. Ultrasonic pulse travel-times were determined in four diametral directions at 2-ft intervals of depth to a final depth of 120 ft in three preblast and six postblast drill cores at the Duval test site. The acoustic logging program provided compressional wave travel-time at 0°, 45°, 90°, and 135° around the core circumference, maximum travel-time difference, mean compressional-wave velocity, and an anisotropy factor. Other acoustic parameters introduced in the analyses were stiffness modulus, seismic quality designation (SQD), and a compensated velocity to account for portions of the core that were nonrecoverable or too highly fractured to permit diametral travel-time measurements.The acoustic parameters all indicated the deterioration in structural quality from the preblast condition, in which the rock already was badly fractured and weathered, to the more highly fractured postblast condition. Because of the highly fragmented, poor structural condition of the rock after blasting, the rock was indicated to be suitable for in-situ leaching, at least at the 20- and 15-ft blasthole spacings, and even in some zones in the rock at the 25-ft blasthole spacing.     

Bromine cycle in subduction zones through in situ Br monitoring in diamond anvil cells

The geochemical partitioning of bromine between hydrous haplogranitic melts, initially enriched with respect to Br and aqueous fluids, has been continuously monitored in situ during decompression. Experiments were carried out in diamond anvil cells from 890 °C to room temperature and from 1.7 GPa to room pressure, typically from high P, T conditions corresponding to total miscibility (presence of a supercritical fluid). Br contents were measured in aqueous fluids, hydrous melts and supercritical fluids. Partition coefficients of bromine were characterized at pressure and temperature between fluids, hydrous melts and/or glasses, as appropriate: D^Br_fluid/melt = (Br)_fluid/(Br)_melt, ranges from 2.18 to 9.2 ± 0.5 for conditions within the ranges 0.66-1.7 GPa, 590-890 °C; and D^Br_fluid/glass = (Br)_fluid/(Br)_glass ranges from 60 to 375 at room conditions. The results suggest that because high pressure melts and fluids are capable of accepting high concentrations of bromine, this element may be efficiently removed from the slab to the mantle source of arc magmas. We show that Br may be highly concentrated in subduction zone magmas and strongly enriched in subduction-related volcanic gases, because its mobility is strongly correlated with that of water during magma degassing. Furthermore, our experimental results suggest that a non negligible part of Br present in the subducted slab may remain in the down-going slab, being transported toward the transition zone. This indicates that the Br cycle in subduction zones is in fact divided in two related but independent parts: (1) a shallower one where recycled Br may leave the slab with a water and silica-bearing “fluid” leading to enriched arc magmas that return Br to the atmosphere. (2) A deeper cycle where Br may be recycled back to the mantle maybe to the transition zone, where it may be present in high pressure water-rich metasomatic fluids.