The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Further evidence for non-reemergence of winter SST anomalies in the North Pacific eastern subtropical mode water area

Following our previous study (Sugimoto and Hanawa, 2005b), we further investigate the reason why reemergence of winter sea surface temperature anomalies does not occur in the North Pacific eastern subtropical mode water (NPESTMW) area, despite its occurrence in the North Pacific subtropical mode water and North Pacific central mode water areas. We use vertical temperature and salinity profiles of the World Ocean Circulation Experiment Hydrographic Program and Argo floats with high vertical and temporal resolution, together with heat flux data through the sea surface. We point out first that one of the causes for non-occurrence of reemergence is that the thickness of NPESTMW is very thin. In addition to this basic cause, two major reasons are found: a vigorous mixing in the lower portion of NPESTMW and less heat input from the atmosphere in the warming season. Since, in the lower portion of NPESTMW and deeper, the stratification is favorable for salt-finger type convection to occur compared with the other mode water areas, vigorous mixing takes place. This is confirmed by both a large Turner Angle there and the existence of staircase structures in vertical temperature and salinity profiles. From the viewpoint of heat input, the NPESTMW area gradually gains heat in the warming season compared with other mode water areas. As a result, NPESTMW cannot be capped so quickly by the shallow summer mixed layer, and water properties of NPESTMW are to be gradually modified, even in the upper portion.     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

Evidence for sinistral strike-slip deformation in The Solomon Island arc

During the SOPACMAPS 2 crusie carried out by IFREMER (Institut Français de Recherche pour l'Exploitation de la Mer) and ORSTOM (Institut Français de Recherche Scientifique pour le dévelopement en Coopération) on theR/V L'Atalante, in the Central Solomon Arc area, multibeam bathymetric and imagery data and single-channel seismic reflection profiles were collected from an area of about 3500 km², to evaluate regional tectonics. Structural data geophysical profiles interpretation provide evidence for left-lateral transtensional tectonics on the southern edge of the Central Solomon Trough. This transtensional deformation is represented by faulting, block tilting, and rhombohedral deformation. The regional geology and the analysis of the sedimentary cover allow us to demonstrate that this tectonic occurred in two different phases during Oligocene to Miocene and Pliocene to Pleistocene times.     

Miocene extensional detachments in the outcropping basement of the northern Alboran Basin (Betics) and their tectonic implications

Whether or not there are extensional detachment faults in the Alboran basement can be tested directly because a part of the Alboran Basin is now emerged. These detachments, related to crustal thinning beneath the Alboran Basin, occurred from the Aquitanian to Tortonian. The resulting extensional geometries can be described in general terms. During the Serravalian a considerable southwest extension of the basin took place, accompanied by south-southeast extension in the northern Gibraltar Arc. Other detachments affected by Serravalian extension can be found. The spreading of the Alboran was nearly coeval with roughly westward migration of the Gibraltar mountain front.     

Annual Cycle of Zooplankton Biomass, Abundance and Species Composition in the Neritic Area of the Balearic Sea, Western Mediterranean

Abstract. Seasonal changes in zooplankton biomass, abundance and species composition were studied at a neritic station in the Balearic Sea between April 1993 and May 1994. Sampling was carried out every 10 days in a zone influenced by the main current circulating through the Mallorca channel. Three main peaks of zooplankton biomass and abundance were observed: (1) at the beginning of summer when the thermocline developed, (2) in autumn when the thermocline broke down, and (3) in early spring. The smaller zooplankton fraction (100–250 μm) comprised on average 32 % of the total biomass and 73 % of total abundance. Copepods were the predominant group (64 % of the total abundance) with Clausocalanus, Oithona and Paracalanus being the most abundant genera. Paracalanus parvus, Clausocalanus furcatus, Acartia clausi, Oithona plumifera, Temora stylifera, Centropages typicus and Oncaea mediterranea were found to be the most important species in the area. Other abundant groups were cladocerans (15 %) and meroplankton larvae (12 %), both of which were particularly numerous during the stratified period. The copepod community was characterized by the above‐cited perennial species, which were abundant during the cycle studied. However, the influence of the hydrological conditions of the Balearic Sea, such as the Atlantic water influx and the physical structure of the water column (stratification and mixing), promoted the observed variability in zooplankton as well as the appearance of characteristic species during the annual cycle.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar)

I present the derivation of the Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar), which is developed for adopting a non-diagonal background error covariance matrix in nonlinear variational analyses (i.e., analyses employing a non-quadratic cost function). POpULar is based on the idea of a linear preconditioned conjugate gradient method widely adopted in ocean data assimilation systems. POpULar uses the background error covariance matrix as a preconditioner without any decomposition of the matrix. This preconditioning accelerates the convergence. Moreover, the inverse of the matrix is not required. POpULar therefore allows us easily to handle the correlations among deviations of control variables (i.e., the variables which will be analyzed) from their background in nonlinear problems. In order to demonstrate the usefulness of POpULar, we illustrate two effects which are often neglected in studies of ocean data assimilation before. One is the effect of correlations among the deviations of control variables in an adjoint analysis. The other is the nonlinear effect of sea surface dynamic height calculation required when sea surface height observation is employed in a three-dimensional ocean analysis. As the results, these effects are not so small to neglect.