Angular and Frequency-Dependent Wave Velocity and Attenuation in Fractured Porous Media

Wave-induced fluid flow generates a dominant attenuation mechanism in porous media. It consists of energy loss due to P-wave conversion to Biot (diffusive) modes at mesoscopic-scale inhomogeneities. Fractured poroelastic media show significant attenuation and velocity dispersion due to this mechanism. The theory has first been developed for the symmetry axis of the equivalent transversely isotropic (TI) medium corresponding to a poroelastic medium containing planar fractures. In this work, we consider the theory for all propagation angles by obtaining the five complex and frequency-dependent stiffnesses of the equivalent TI medium as a function of frequency. We assume that the flow direction is perpendicular to the layering plane and is independent of the loading direction. As a consequence, the behaviour of the medium can be described by a single relaxation function. We first consider the limiting case of an open (highly permeable) fracture of negligible thickness. We then compute the associated wave velocities and quality factors as a function of the propagation direction (phase and ray angles) and frequency. The location of the relaxation peak depends on the distance between fractures (the mesoscopic distance), viscosity, permeability and fractures compliances. The flow induced by wave propagation affects the quasi-shear (qS) wave with levels of attenuation similar to those of the quasi-compressional (qP) wave. On the other hand, a general fracture can be modeled as a sequence of poroelastic layers, where one of the layers is very thin. Modeling fractures of different thickness filled with CO₂ embedded in a background medium saturated with a stiffer fluid also shows considerable attenuation and velocity dispersion. If the fracture and background frames are the same, the equivalent medium is isotropic, but strong wave anisotropy occurs in the case of a frameless and highly permeable fracture material, for instance a suspension of solid particles in the fluid.     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

Latitudinal patterns of export production recorded in surface sediments of the Chilean Patagonian fjords (41–55°S) as a response to water column productivity

The Chilean Patagonian fjords region (41–56°S) is characterized by highly complex geomorphology and hydrographic conditions, and strong seasonal and latitudinal patterns in precipitation, freshwater discharge, glacier coverage, and light regime; all of these directly affect biological production in the water column. In this study, we compiled published and new information on water column properties (primary production, nutrients) and surface sediment characteristics (biogenic opal, organic carbon, molar C/N, bulk sedimentary δ¹³C_org) from the Chilean Patagonian fjords between 41°S and 55°S, describing herein the latitudinal pattern of water column productivity and its imprint in the underlying sediments. Based on information collected at 188 water column and 118 sediment sampling sites, we grouped the Chilean fjords into four main zones: Inner Sea of Chiloé (41° to ～44°S), Northern Patagonia (44° to ～47°S), Central Patagonia (48–51°S), and Southern Patagonia (Magellan Strait region between 52° and 55°S). Primary production in the Chilean Patagonian fjords was the highest in spring–summer, reflecting the seasonal pattern of water column productivity. A clear north–south latitudinal pattern in primary production was observed, with the highest average spring and summer estimates in the Inner Sea of Chiloé (2427 and 5860 mg C m^?2 d^?1) and Northern Patagonia (1667 and 2616 mg C m^?2 d^?1). This pattern was closely related to the higher availability of nutrients, greater solar radiation, and extended photoperiod during the productive season in these two zones. The lowest spring value was found in Caleta Tortel, Central Patagonia (91 mg C m^?2 d^?1), a site heavily influenced by glacier meltwater and river discharge loaded with glacial sediments. Biogenic opal, an important constituent of the Chilean fjord surface sediments (Si_OPAL ～1–13%), reproduced the general north–south pattern of primary production and was directly related to water column silicic acid concentrations. Surface sediments were also rich in organic carbon content and the highest values corresponded to locations far away from glacier influence, sites within fjords, and/or semi-enclosed and protected basins, reflecting both autochthonous (water column productivity) and allochthonous sources (contribution of terrestrial organic matter from fluvial input to the fjords). A gradient was observed from the more oceanic sites to the fjord heads (west–east) in terms of bulk sedimentary δ¹³C_org and C/N ratios; the more depleted (δ¹³C_org ?26‰) and higher C/N (23) values corresponded to areas close to rivers and glaciers. A comparison of the Chilean Patagonian fjords with other fjord systems in the world revealed high variability in primary production for all fjord systems as well as similar surface sediment geochemistry due to the mixing of marine and terrestrial organic carbon.     

A Comprehensive Method for Fractionating Soil Organic Matter Not Protected and Protected from Decomposition by Physical and Chemical Mechanisms

The objective of this work was to describe a method for isolating meaningful and measurable soil organic matter (SOM) pools that differ in the mechanisms by which they are protected from decomposition. The proposed method is appropriate for soil C stabilization and sequestration studies. Unlike previous fractionation schemes, this procedure allows free SOM located between aggregates (unprotected C pool) and SOM occluded within both macroaggregates and microaggregates (C weakly and strongly protected by physical mechanisms, respectively) to be recovered separately, freed from the soil mineral matrix and the mineral‐associated SOM pool (C pool protected by chemical mechanisms) and thus well suited to advanced chemical characterization by ¹³C‐NMR. Briefly, free SOM is isolated by an initial density separation. Stable macroaggregates are broken up into stable microaggregates and intra‐macroaggregate SOM, which is then separated by density. Finally, intra‐microaggregate SOM is isolated from mineral‐associated SOM by a third density separation after ultrasonic disruption. The SOM dissolved during the fractionation procedure is also recovered. Results obtained on soil samples with contrasting textures suggested that clay content induces a decrease of the proportion of free organic C and an increase of mineral‐associated organic C content. Free SOM is characterized by a marked presence of undecayed organic material and biologically labile substances, such as carbohydrates and proteins. In contrast, SOM occluded within aggregates, especially within microaggregates, represents a more decomposed fraction, relatively enriched in unsubstituted‐aliphatic material, most probably lipid biopolymers.     

Sediments Quality Assessment of Jacarepaguá Lagoon: The Venue of the 2011 Rock in Rio

In order to aid in the efforts of the 2016 Olympic Games, the organizers of 2011 Rock in Rio decided to build a permanent venue next to the Olympic Park. The area is problematic from the geotechnical point of view since it presents soils with low shear strength, low permeability, and high plasticity, so major soil improvement works were carried out. Bored soil–cement columns were placed to increase soil shear strength and reduce compressibility. A meter thick fill composed of gneiss residual soil was placed and trenches were digged to drain rainwater. However, earlier studies conducted on Jacarepaguá Lagoon have detected the presence of heavy metals in these sediments. In this study, an environmental survey on the Jacarepaguá Lagoon sediments took place in order to choose a place where its sediments could be dredged to be later used in the drainage facilities. The results indicated areas where the threshold level 1 (low probability of adverse effects) issued by the general procedures for sediments quality assessments for dredging purposes, Resolution no 344 of the Brazilian Federal Government, was surpassed. Levels above the limits established for cadmium (Cd), lead (Pb), copper (Cu), nickel (Ni), and zinc (Zn) were detected. Based on this consideration the State Environmental Agency issued a permit allowing the organizers of 2011 Rock in Rio to dredge an area close to City of Rock in order to obtain coarse sediments for the drainage facilities. In addition, it was found that those sediments were ideal for this application since their hydraulic conductivity is on the order of 10^?2 cm/s.     

Energetic Charged Particles Above Thunderclouds

The French government has committed to launch the satellite TARANIS to study transient coupling processes between the Earth’s atmosphere and near-Earth space. The prime objective of TARANIS is to detect energetic charged particles and hard radiation emanating from thunderclouds. The British Nobel prize winner C.T.R. Wilson predicted lightning discharges from the top of thunderclouds into space almost a century ago. However, new experiments have only recently confirmed energetic discharge processes which transfer energy from the top of thunderclouds into the upper atmosphere and near-Earth space; they are now denoted as transient luminous events, terrestrial gamma-ray flashes and relativistic electron beams. This meeting report builds on the current state of scientific knowledge on the physics of plasmas in the laboratory and naturally occurring plasmas in the Earth’s atmosphere to propose areas of future research. The report specifically reflects presentations delivered by the members of a novel Franco-British collaboration during a meeting at the French Embassy in London held in November 2011. The scientific subjects of the report tackle ionization processes leading to electrical discharge processes, observations of transient luminous events, electromagnetic emissions, energetic charged particles and their impact on the Earth’s atmosphere. The importance of future research in this area for science and society, and towards spacecraft protection, is emphasized.     

Tectonic setting of the recent damaging seismic series in the Southeastern Betic Cordillera,Spain

In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.     

Estimating Runoff Using Hydro-Geodetic Approaches

Given the continuous decline in global runoff data availability over the past decades, alternative approaches for runoff determination are gaining importance. When aiming for global scale runoff at a sufficient temporal resolution and with homogeneous accuracy, the choice to use spaceborne sensors is only a logical step. In this respect, we take water storage changes from Gravity Recovery And Climate Explorer (grace) results and water level measurements from satellite altimetry, and present a comprehensive assessment of five different approaches for river runoff estimation: hydrological balance equation, hydro-meteorological balance equation, satellite altimetry with quantile function-based stage–discharge relationships, a rudimentary instantaneous runoff–precipitation relationship, and a runoff–storage relationship that takes time lag into account. As a common property, these approaches do not rely on hydrological modeling; they are either purely data driven or make additional use of atmospheric reanalyses. Further, these methods, except runoff–precipitation ratio, use geodetic observables as one of their inputs and, therefore, they are termed hydro-geodetic approaches. The runoff prediction skill of these approaches is validated against in situ runoff and compared to hydrological model predictions. Our results show that catchment-specific methods (altimetry and runoff–storage relationship) clearly outperform the global methods (hydrological and hydro-meteorological approaches) in the six study regions we considered. The global methods have the potential to provide runoff over all landmasses, which implies gauged and ungauged basins alike, but are still limited due to inconsistencies in the global hydrological and hydro-meteorological datasets that they use.     

Methodology of seasonal morphological modelisation for nourishment strategies on a Mediterranean beach

A modified 2DH morphodynamical model was employed to simulate the evolution of large-scale features with major implications for beach nourishment. The study was focused on modelling the evolution of material artificially placed in different parts of the profile, extracting or adding material to the natural bars, and quantifying how the profile responds to different wave climates and nourishment placements. The simulated results were compared with field data from a Mediterranean beach.