Orbital Elements of 2004 Perseid Meteoroids Perturbed by Jupiter

Jupiter and Saturn produce important gravitational impulses on meteoroids released by comet 109P/Swift-Tuttle. The meteoroids from this comet once released follow retrograde orbits that during their periodic approaches to these planets (within 1.6 and 0.9 A.U., respectively) are impulsed gaining orbital energy. This perturbation effect is translated into a net inward shift in the node of the perturbed meteoroids. Such geometry with Jupiter occurred in 2004 over a meteoroid trail ejected by this comet during the 1862 A.D. return of the comet to perihelion. In order to study the predicted outburst produced by one-revolution meteoroids, the Spanish Photographic Meteor Network (SPMN) performed an extensive campaign. As a part of this observational effort here are presented 10 accurate meteoroid orbits. We discuss their origin by comparing them with the theoretical orbital elements of the dust trails intercepting the Earth during the 2004 Perseid return.     

Monte-Carlo Simulations of Cosmic-ray and Internal Radiation Effects on ISOCAM on Board ISO

One of the main limitations to the sensitivity of the infrared camera ISOCAM on-board the Infrared Space Observatory (ISO) comes from responsivity variations and glitches caused by the impacts of charged particles in photo-detectors. Glitch rate measurements, glitch properties and removal methods have already been addressed during the first ISO detector workshop(Madrid, 1998) and published in a special issue of Experimental Astronomy. It appeared that glitch rate and most of glitch properties could be reproduced by Monte-Carlo simulations. This is very interesting in order to predict before launch the effect of charged particles in photo-detectors operated in space. This paper presents results of Monte-Carlo simulations of radiation effects on ISOCAM detectors. Glitch rates, spatial and energetic properties of glitches have been computed and are compared with measured values. This revised version was published online in July 2006 with corrections to the Cover Date.     

Light curves of the eclipsing systems of RS CVn-type

This work presents the light curves for rotating spotted stars generated by a computational code developed by us. This code is based in a model of the system and its analytical solution. The work also present an analysis of the photometric curve variations with the changes in the model's parameters.As a first result we have simulated a temporal evolution of the light curve when the photospheric spot varies its size and position and we reproduced some observational light curves of the II Peg star.Work supported by Dirección de Investigación, Universidad de La Serena, Chile.     

Correlation of hard X-ray and type III bursts in solar flares

The observed correlations between X-ray and type III radio emissions from solar bursts are described by means of a bivariate distribution function. Procedures for determining the form of this distribution are described using a sample of data analyzed by Kane (1981). With the help of this distribution a model is constructed to explain the correlation between the X-ray spectral index and the ratio of X-ray to radio intensities. Implications of the model are discussed.     

Heat balance for the high-temperature component of a solar flare

Shortly after the occurrence of the impulsive spikes of the two-ribbon flare of May 21, 1980, a temperature analysis of the X-ray emitting flare plasma showed the presence of a low-temperature component [n = 15 × 10¹⁰ cm^#X2212;3; T = 20 × 10⁶ K] and a high-temperature component [n = 2 × 10¹⁰ cm^#X2212;3; T = 40 × 10⁶ K]. The mean free path of an electron in the hot component is comparable to the size of the source (≈ 10⁴ km). Heat losses from the hot source can therefore not be described with classical formulae. Theoretical arguments show that most likely the electron to ion temperature ratio T _e/T_i in the hot plasma is close to unity. This implies the presence of a hot ion component (T _i ≈ 40 × 10⁶ K) as well. Under these conditions (T _e ≈ T _i) heat flux limitation by electrostatic turbulence is ineffective. However, reduction of the heat flux is still possible due to the breakdown of classical theory. It is demonstrated that only non-classical current dissipation processes can sustain a hot source against cooling by a saturated heat flux. Investigation of the collisionality as a function of position along a magnetic loop shows that the breakdown of classical theory should be expected to occur first near the base of the loop. We conclude that the newly discovered hot source is important for the energy budget of the flare, even if the heat losses are considerably reduced. It is estimated that for the May 21, 1980 flare a total of about 10³¹ ergs were necessary to maintain the hot source against heat losses over the time period that it was observed (≈ 10 min).     

Note on Lagrange's inversion formula

An inductive algorithm is proposed to solve Lagrange's implicit equation when its right hand member is a power series in the small parameter.     

Inverse problem in hydrogeology

The state of the groundwater inverse problem is synthesized. Emphasis is placed on aquifer characterization, where modelers have to deal with conceptual model uncertainty (notably spatial and temporal variability), scale dependence, many types of unknown parameters (transmissivity, recharge, boundary conditions, etc.), nonlinearity, and often low sensitivity of state variables (typically heads and concentrations) to aquifer properties. Because of these difficulties, calibration cannot be separated from the modeling process, as it is sometimes done in other fields. Instead, it should be viewed as one step in the process of understanding aquifer behavior. In fact, it is shown that actual parameter estimation methods do not differ from each other in the essence, though they may differ in the computational details. It is argued that there is ample room for improvement in groundwater inversion: development of user-friendly codes, accommodation of variability through geostatistics, incorporation of geological information and different types of data (temperature, occurrence and concentration of isotopes, age, etc.), proper accounting of uncertainty, etc. Despite this, even with existing codes, automatic calibration facilitates enormously the task of modeling. Therefore, it is contended that its use should become standard practice.

---

Resumen Se sintetiza el estado del problema inverso en aguas subterráneas. El énfasis se ubica en la caracterización de acuíferos, donde los modeladores tienen que enfrentar la incertidumbre del modelo conceptual (principalmente variabilidad temporal y espacial), dependencia de escala, muchos tipos de parámetros desconocidos (transmisividad, recarga, condiciones limitantes, etc), no linealidad, y frecuentemente baja sensibilidad de variables de estado (típicamente presiones y concentraciones) a las propiedades del acuífero. Debido a estas dificultades, no puede separarse la calibración de los procesos de modelado, como frecuentemente se hace en otros campos. En su lugar, debe de visualizarse como un paso en el proceso de entendimiento del comportamiento del acuífero. En realidad, se muestra que los métodos reales de estimación de parámetros no difieren uno del otro en lo esencial, aunque sí pueden diferir en los detalles computacionales. Se discute que existe amplio espacio para la mejora del problema inverso en aguas subterráneas: desarrollo de códigos amigables al usuario, acomodamiento de variabilidad a través de geoestadística, incorporación de información geológica y diferentes tipos de datos (temperatura, presencia y concentración de isótopos, edad, etc), explicación apropiada de incertidumbre, etc. A pesar de esto, aún con los códigos existentes, la calibración automática facilita enormemente la tarea de modelado. Por lo tanto, se sostiene que su uso debería de convertirse en práctica standard.

---

Résumé Létat du problème inverse des eaux souterraines est synthétisé. Laccent est placé sur la caractérisation de laquifère, où les modélisateurs doivent jouer avec lincertitude des modèles conceptuels (notamment la variabilité spatiale et temporelle), les facteurs déchelle, plusieurs inconnues sur différents paramètres (transmissivité, recharge, conditions aux limites, etc.), la non linéarité, et souvent la sensibilité de plusieurs variables détat (charges hydrauliques, concentrations) des propriétés de laquifère. A cause de ces difficultés, le calibrage ne peut être séparé du processus de modélisation, comme cest le cas dans dautres cas de figure. Par ailleurs, il peut être vu comme une des étapes dans le processus de détermination du comportement de laquifère. Il est montré que les méthodes dévaluation des paramètres actuels ne diffèrent pas si ce nest dans les détails des calculs informatiques. Il est montré quil existe une large panoplie de techniques d ‹inversion : codes de calcul utilisables par tout-un-chacun, accommodation de la variabilité via la géostatistique, incorporation dinformations géologiques et de différents types de données (température, occurrence, concentration en isotopes, âge, etc.), détermination de lincertitude. Vu ces développements, la calibration automatique facilite énormément la modélisation. Par ailleurs, il est souhaitable que son utilisation devienne une pratique standardisée.