Astronomical time scale for the Middle Oxfordian to Late Kimmeridgian in the Swiss and French Jura Mountains

Detailed investigation of facies and sedimentary structures reveals that, during the Middle Oxfordian to Late Kimmeridgian, the shallow carbonate platform of the Swiss and French Jura Mountains recorded high-frequency sea-level fluctuations quite faithfully. The cyclostratigraphic analysis within the established biostratigraphic and sequence-chronostratigraphic framework implies that the resulting hierarchically stacked depositional sequences formed in tune with the orbital cycles of precession (20 kyr) and eccentricity (100 and 400 kyr). The astronomical time scale presented here is based on the correlation of 19 platform sections and 4 hemipelagic sections from south-eastern France where good biostratigraphic control is available. The cyclostratigraphic interpretation suggests that the interval between sequence boundaries Ox4 and Kim1 (early Middle Oxfordian to earliest Kimmeridgian) lasted 3.2 myr and that the Kimmeridgian sensu gallico has a duration of 3.2 to 3.3 myr. The astronomical time scale proposed here is compared to time scales established by other authors in other regions and the discrepancies are discussed. Despite these discrepancies, there is a potential to estimate the durations of ammonite zones and depositional sequences more precisely and to better evaluate the rates of sedimentary, ecological and diagenetic processes. Editorial handling: Hanspeter Funk, Helmut Weissert, Stefan Bucher     

Decoupling of arsenic and iron release from ferrihydrite suspension under reducing conditions: a biogeochemical model

High levels of arsenic in groundwater and drinking water are a major health problem. Although the processes controlling the release of As are still not well known, the reductive dissolution of As-rich Fe oxyhydroxides has so far been a favorite hypothesis. Decoupling between arsenic and iron redox transformations has been experimentally demonstrated, but not quantitatively interpreted. Here, we report on incubation batch experiments run with As(V) sorbed on, or co-precipitated with, 2-line ferrihydrite. The biotic and abiotic processes of As release were investigated by using wet chemistry, X-ray diffraction, X-ray absorption and genomic techniques. The incubation experiments were carried out with a phosphate-rich growth medium and a community of Fe(III)-reducing bacteria under strict anoxic conditions for two months. During the first month, the release of Fe(II) in the aqueous phase amounted to only 3% to 10% of the total initial solid Fe concentration, whilst the total aqueous As remained almost constant after an initial exchange with phosphate ions. During the second month, the aqueous Fe(II) concentration remained constant, or even decreased, whereas the total quantity of As released to the solution accounted for 14% to 45% of the total initial solid As concentration. At the end of the incubation, the aqueous-phase arsenic was present predominately as As(III) whilst X-ray absorption spectroscopy indicated that more than 70% of the solid-phase arsenic was present as As(V). X-ray diffraction revealed vivianite Fe(II)₃(PO₄)₂.8H₂O in some of the experiments. A biogeochemical model was then developed to simulate these aqueous- and solid-phase results. The two main conclusions drawn from the model are that (1) As(V) is not reduced during the first incubation month with high Eh values, but rather re-adsorbed onto the ferrihydrite surface, and this state remains until arsenic reduction is energetically more favorable than iron reduction, and (2) the release of As during the second month is due to its reduction to the more weakly adsorbed As(III) which cannot compete against carbonate ions for sorption onto ferrihydrite. The model was also successfully applied to recent experimental results on the release of arsenic from Bengal delta sediments.     

The impact of hydrological changes on travertine deposits related to thermal springs in the Pamukkale area (SW Turkey)

Pamukkale thermal waters (35 °C), exhibiting calcium-bicarbonate-sulfate composition and high carbon dioxide concentration, are of a predominantly meteoric origin. The meteoric fluid, circulating through faults and fractures, is heated by magmatic intrusions at great depth, and ascends from deep reservoirs to the surface. Mixing with relatively cold groundwater in the near surface zone promotes different saturation conditions with respect to calcium carbonate that later precipitates at depth and/or the surface. Dissolution-deposition processes of calcium carbonate both at surface and depth environments may help to reconstruct past climate direction in the field. During wet climate conditions a high-rate of calcium carbonate accumulation would be expected to occur at the surface because thermal fluid would be under-saturated with respect to calcium carbonate at depth because of a relatively higher mixing ratio with cold groundwater. During dry climate conditions the thermal fluid would be super-saturated at depth because of the highly acidic environment. Hydrometeorological studies reveal that the annual precipitation at the Pamukkale hydrothermal field tends to decrease with time. This climatic change in the area was also detected from geological records. While humid climate conditions prevailed during the late Quaternary, the area has recently been affected by arid/semi-arid climate conditions, followed by some episodic transitions. This study has shown how the system has possibly reacted to different climate conditions since antiquity.     

The state of the environment in Mexico

The present work evaluates the state of the environment in Mexico based on indicators of the present status of the country’s natural resource management, social and economical conditions and anthropogenic modifications. The Mexican environment is interpreted as a spatially open system having a historical character that is essentially determined by the continual interaction between nature, society and economy. The landscape approach is followed, considering as units of territorial analysis each one of the 145 biophysical environmental units included in the national physiographic regionalization. The assessment of 16 indicators for each biophysical environmental unit was made considering their regional environmental integrity problems, the degree of disarticulation of their structure and function, and the alteration of their territorial structure, all of which determine whether or not they accomplish their environmental functions and achieve environmental stability. The classification of the state of the environment included 5 categories in 8 combinations represented in the map of the state of the environment in Mexico for the year 2008. The map shows that nearly 47.10% of the country’s surface has an environmental status ranging between unstable and critical, the problematic areas being mostly concentrated in the southeast and center of the national territory.     

Inverse problem in hydrogeology

The state of the groundwater inverse problem is synthesized. Emphasis is placed on aquifer characterization, where modelers have to deal with conceptual model uncertainty (notably spatial and temporal variability), scale dependence, many types of unknown parameters (transmissivity, recharge, boundary conditions, etc.), nonlinearity, and often low sensitivity of state variables (typically heads and concentrations) to aquifer properties. Because of these difficulties, calibration cannot be separated from the modeling process, as it is sometimes done in other fields. Instead, it should be viewed as one step in the process of understanding aquifer behavior. In fact, it is shown that actual parameter estimation methods do not differ from each other in the essence, though they may differ in the computational details. It is argued that there is ample room for improvement in groundwater inversion: development of user-friendly codes, accommodation of variability through geostatistics, incorporation of geological information and different types of data (temperature, occurrence and concentration of isotopes, age, etc.), proper accounting of uncertainty, etc. Despite this, even with existing codes, automatic calibration facilitates enormously the task of modeling. Therefore, it is contended that its use should become standard practice.

---

Resumen Se sintetiza el estado del problema inverso en aguas subterráneas. El énfasis se ubica en la caracterización de acuíferos, donde los modeladores tienen que enfrentar la incertidumbre del modelo conceptual (principalmente variabilidad temporal y espacial), dependencia de escala, muchos tipos de parámetros desconocidos (transmisividad, recarga, condiciones limitantes, etc), no linealidad, y frecuentemente baja sensibilidad de variables de estado (típicamente presiones y concentraciones) a las propiedades del acuífero. Debido a estas dificultades, no puede separarse la calibración de los procesos de modelado, como frecuentemente se hace en otros campos. En su lugar, debe de visualizarse como un paso en el proceso de entendimiento del comportamiento del acuífero. En realidad, se muestra que los métodos reales de estimación de parámetros no difieren uno del otro en lo esencial, aunque sí pueden diferir en los detalles computacionales. Se discute que existe amplio espacio para la mejora del problema inverso en aguas subterráneas: desarrollo de códigos amigables al usuario, acomodamiento de variabilidad a través de geoestadística, incorporación de información geológica y diferentes tipos de datos (temperatura, presencia y concentración de isótopos, edad, etc), explicación apropiada de incertidumbre, etc. A pesar de esto, aún con los códigos existentes, la calibración automática facilita enormemente la tarea de modelado. Por lo tanto, se sostiene que su uso debería de convertirse en práctica standard.

---

Résumé Létat du problème inverse des eaux souterraines est synthétisé. Laccent est placé sur la caractérisation de laquifère, où les modélisateurs doivent jouer avec lincertitude des modèles conceptuels (notamment la variabilité spatiale et temporelle), les facteurs déchelle, plusieurs inconnues sur différents paramètres (transmissivité, recharge, conditions aux limites, etc.), la non linéarité, et souvent la sensibilité de plusieurs variables détat (charges hydrauliques, concentrations) des propriétés de laquifère. A cause de ces difficultés, le calibrage ne peut être séparé du processus de modélisation, comme cest le cas dans dautres cas de figure. Par ailleurs, il peut être vu comme une des étapes dans le processus de détermination du comportement de laquifère. Il est montré que les méthodes dévaluation des paramètres actuels ne diffèrent pas si ce nest dans les détails des calculs informatiques. Il est montré quil existe une large panoplie de techniques d ‹inversion : codes de calcul utilisables par tout-un-chacun, accommodation de la variabilité via la géostatistique, incorporation dinformations géologiques et de différents types de données (température, occurrence, concentration en isotopes, âge, etc.), détermination de lincertitude. Vu ces développements, la calibration automatique facilite énormément la modélisation. Par ailleurs, il est souhaitable que son utilisation devienne une pratique standardisée.

     

Hydrologic models coupled with 2D hydrodynamic model for high-resolution urban flood simulation

Natural Hazards - Floods are the most frequent natural disaster and pose a very challenging threat to many cities worldwide. Understanding the flood dynamic is essential for developing strategies...     

The Ribeira fluorite district,southern Brazil

The origin and evolution of different ore deposits grouped in the same district are often complex and may involve inheritance from crustal or mantle geochemical anomalies, remobilization of former ore deposits and a polyphase hydrothermal history. Localized in a Proterozoic basement in the Parana state, the Ribeira fluorite district is such an example composed of three deposit types with distinct geological and geochemical characters. Emplaced at different periods from the late Proterozoic to the Cretaceous, they are roughly aligned along a belt nearly 10 km in width and 50 km in length, the southern boundary of which is a transcurrent fault. Two main ore facies are present: (1) microcrystalline ore (< 0.1 mm grains) and (2) macrocrystalline ore (with a grain size of several millimetres). The former results from the replacement of metalimestones or internal karstic sediments and the latter from microcrystalline ore dissolution and pore precipitation or recrystallization. At least two different groups of source rocks can be proposed for the trapped REE in CaF₂: (1) fluorite samples associated with the Mato Preto carbonatitic rocks display a slightly negative ɛNd compatible with a mantle source and a REE pattern with the higher ΣREE and La/Yb ratio in the district; (2) other fluorites have a strongly negative ɛNd (− 14 to − 20) which indicates a crustal source. That fluorine and REE have the same source is possible in strata-bound and fracture-filling deposits, but is doubtful at Mato Preto, the only economic fluorite deposit associated with carbonatite rocks in Brazil. This occurrence within a Precambrian fluorite belt suggests that remobilization of a former strata-bound deposit was a more significant metallogenic process than magmatic differentiation. Editorial handling: DR     

Performance enhancement of a GIS-based facility location problem using desktop grid infrastructure

This paper presents the integration of desktop grid infrastructure with GIS technologies, by proposing a parallel resolution method in a generic distributed environment. A case study focused on a discrete facility location problem, in the biomass area, exemplifies the high amount of computing resources (CPU, memory, HDD) required to solve the spatial problem. A comprehensive analysis is undertaken in order to analyse the behaviour of the grid-enabled GIS system. This analysis, consisting of a set of the experiments on the case study, concludes that the desktop grid infrastructure is able to use a commercial GIS system to solve the spatial problem achieving high speedup and computational resource utilization. Particularly, the results of the experiments showed an increase in speedup of fourteen times using sixteen computers and a computational efficiency greater than 87 % compared with the sequential procedure.