Bridging theory and implementation – Testing an abstract classification system for practical mapping by field survey and 3D aerial photographic interpretation

ABSTRACT

The abstract classification system Nature in Norway (NiN) has detailed ecological definitions of a high number of ecosystem units, but its applicability in practical vegetation mapping is unknown because it was not designed with a specific mapping method in mind. To investigate this further, two methods for mapping – 3D aerial photographic interpretation of colour infrared photos and field survey – were used to map comparable neighbouring sites of 1 km² in Hvaler Municipality, south-eastern Norway. The classification accuracy of each method was evaluated using a consensus classification of 160 randomly distributed plots within the study sites. The results showed an overall classification accuracy of 62.5% for 3D aerial photographic interpretation and 82.5% for field survey. However, the accuracy varied for the ecosystem units mapped. The classification accuracy of ecosystem units in acidic, dry and open terrain was similar for both methods, whereas classification accuracy of calcareous units was highest using field survey. The mapping progress using 3D aerial photographic interpretation was more than two times faster than that of field survey. Based on the results, the authors recommend a method combining 3D aerial photographic interpretation and field survey to achieve effectively accurate mapping in practical applications of the NiN system.     

Crystallographic studies of some olivine-related (Ni,Mg)3(PO4)2 solid solutions

Olivine-related (Ni, Mg)₃(PO₄)₂ solid solutions were prepared and equilibrated at 1070 K. Accurate monoclinic unit cell dimensions were determined from Guinier-Hägg photographic data. Structural refinements based on the X-ray profile-fitting technique after Rietveld were carried out for pure nickel (II) orthophosphate and for three Ni/Mg solid solutions. (Ni_1-x Mg _x )₃(PO₄)₂ phases with 0.40≦x≦0.60 are probably isostructural with Ni₃(PO₄)₂ (P2₁/a) while phases with low magnesium contents (<27 atom % Mg) deviate structurally from Ni₃(PO₄)₂. The results also show that Ni²⁺ is partially ordered at the octahedralM(1) sites, withK _D (Ni, Mg)=4.0±0.2     

Timing and maximum flood level of the Early Holocene glacial lake Nedre Glomsjø outburst flood,Norway

This study discusses the timing and maximum flood level of the Nedre Glomsjø outburst flood, Norway, based on sediment records retrieved from 15 bog and lake basins located close to the purported maximum flooded level. The sediment records in 12 of the basins consist of a distinct light-coloured silty bed that is correlated to the outburst-flood-deposited ‘Romerike Silt Bed’ identified elsewhere in the region. The silt bed is recorded in basins up to a certain elevation and is absent above this level. The new maximum flood level inferred from the basin sediment records exceeds the established landform-induced palaeostage indicators by 5–10 m. The data indicate a higher maximum flood level and larger inundation area than previously suggested and highlight the importance of acquiring a wide range of geological data when reconstructing palaeofloods. Radiocarbon dates of terrestrial macrofossils found stratigraphically above and below the Romerike Silt Bed suggest that the glacial lake Nedre Glomsjø outburst flood occurred between 10.5 and 10.3 cal. ka BP. The new and well-constrained timing of the outburst flood is beneficial for reconstructing regional deglaciation and provides a precise age for the Romerike Silt Bed chronostratigraphical marker, which is of value for studies in SE Norway and adjacent regions.     

Designing Service Architectures for Distributed Geoprocessing: Challenges and Future Directions

In this paper we study the feasibility of using services offered by a Spatial Data Infrastructure as a basis for distributed service oriented geoprocessing. By developing a prototype we demonstrate that a Spatial Data Infrastructure facilitates rapid development of applications that solve typical problems for an existing risk management application. The prototype provides users with a distributed application that enables the assessment of fire damage areas based on land cover data in a given area. The services involved in the application include: Web Feature Services, Web Map Services, a Gazetteer Service, a Catalogue Service, and Geoprocessing Services. We present the architecture of the application and describe details about implementation‐specific issues. We conclude that current OGC specifications provide a sound basis for developing service oriented architectures for geographic applications; however, in particular for geoprocessing applications, we question the feasibility of the use of Web Feature Services as data sources for larger amounts of data and call for further research in this direction.     

Seismic investigations in the Weddell Sea Embayment

Seismic multi-channel data collected during Norwegian Antarctic Research Expeditions in 1976–1977 and 1978–1979 outline aspects of the Cenozoic depositional environment in the Weddell Sea Embayment. Acoustic basement, probably representing the East Antarctic craton, is exposed in a 50–100 km wide swath along the ice barrier between 78°S–75.5°S on the eastern side of the Crary Trough. The shelf prograded westward and northward from the craton into a subsiding basin colinear with the Transantarctic Mountain Range. Measured sediment thicknesses exceed 5 km. During middle and late Tertiary times a submarine fan complex—the Crary Fan—developed on the southeastern margin of the Weddell Sea Embayment. The glacially eroded Crary Trough is located at the contact between the craton and a sedimentary basin to the west. The entire sedimentary section is undisturbed by faulting or folding, which indicates that any movements related to Cenozoic uplift of the Trans-Antarctic Mountains and/or relative motion of East Antarctica had little effect in the area north of the Filchner Ice Shelf east of 41°W.     

North Atlantic Water in the Barents Sea Opening, 1997 to 1999

North Atlantic Water (NAW) is an important source of heat and salt to the Nordic seas and the Arctic Ocean. To measure the transport and variability of one branch of NAW entering the Arctic, a transect across the entrance to the Barents Sea was occupied 13 times between July 1997 and November 1999, and hydrography and currents were measured. There is large variability between the cruises, but the mean currents and the hydrography show that the main inflow takes place in Bjørnøyrenna, with a transport of 1.6 Sv of NAW into the Barents Sea. Combining the flow field with measurements of temperature and salinity, this results in mean heat and salt transports by NAW into the Barents Sea of 3.9×10¹³ W and 5.7×10⁷ kg s⁻¹, respectively. The NAW core increased in temperature and salinity by 0.7 °C yr⁻¹ and 0.04 yr⁻¹, respectively, over the observation period. Variations in the transports of heat and salt are, however, dominated by the flow field, which did not exhibit a significant change.     

Forecasting near-surface ocean winds with Kalman filter techniques

In this paper a statistical forecasting model designed for bounded areas of near-surface ocean wind speeds is implemented.Dimension reduction is achieved by decomposing the covariance structure into one large-scale and one small-scale component using empirical orthogonal functions. The large-scale component is modelled with an AR process and forecasts are calculated by applying a Kalman filter.The model is suited for stable weather situations as for unsteady situations it requires more frequent wind information. From the prediction variance fields it is possible to identify where unexpected weather usually enters the area.     

Precise U–Pb baddeleyite ages of mafic dykes and intrusions in southern West Greenland and implications for a possible reconstruction with the Superior craton

The Archaean block of southern Greenland constitutes the core of the North Atlantic craton (NAC) and is host to a large number of Precambrian mafic intrusions and dyke swarms, many of which are regionally extensive but poorly dated. For southern West Greenland, we present a U–Pb zircon age of 2990 ± 13 Ma for the Amikoq mafic–ultramafic layered intrusion (Fiskefjord area) and four baddeleyite U–Pb ages of Precambrian dolerite dykes. Specifically, a dyke located SE of Ameralik Fjord is dated at 2499 ± 2 Ma, similar to a previously reported ⁴⁰Ar/³⁹Ar age of a dyke in the Kangâmiut area. For these and related intrusions of ca. 2.5 Ga age in southern West Greenland, we propose the name Kilaarsarfik dykes. Three WNW-trending dykes of the MD3 swarm yield ages of 2050 ± 2 Ma, 2041 ± 3 Ma and 2029 ± 3 Ma. A similar U–Pb baddeleyite age of 2045 ± 2 Ma is also presented for a SE-trending dolerite (Iglusuataliksuak dyke) in the Nain Province, the rifted western block of the NAC in Labrador. We speculate that the MD3 dykes and age-equivalent NNE-trending Kangâmiut dykes of southern West Greenland, together with the Iglusuataliksuak dyke (after closure of the Labrador Sea) represent components of a single, areally extensive, radiating swarm that signaled the arrival of a mantle plume centred on what is presently the western margin of the North Atlantic craton. Comparison of the magmatic ‘barcodes’ from the Nain and Greenland portions of the North Atlantic craton with the established record from the north-eastern Superior craton shows matches at 2500 Ma, 2214 Ma, 2050–2030 Ma and 1960–1950 Ma. We use these new age constraints, together with orientations of the dyke swarms, to offer a preliminary reconstruction of the North Atlantic craton near the north-eastern margin of the Superior craton during the latest Archaean and early Palaeoproterozoic, possibly with the Core Zone craton of eastern Canada intervening.     

Experimental modelling of shallow magma emplacement: Application to saucer-shaped intrusions

Saucer-shaped dolerite and sandstone intrusions are common in sedimentary basins world-wide. We have conducted a series of scaled experiments simulating the process of magma emplacement in sedimentary basins, with particular attention on the formation of saucer-shaped sills. The model materials were (1) cohesive fine-grained silica flour, representing brittle crust; and (2) molten low-viscosity oil, representing magma. The experiments were performed in both homogeneous and layered models. In all the experiments, oil injection resulted in doming of the surface. In the homogeneous models, the injected oil formed cone sheets and sub-vertical dykes. Cone sheets formed for shallow injection (1–3 cm), and vertical dykes formed for deeper injection (4–5 cm). In layered models, the injected oil always formed saucer-shaped intrusions. Our experimental results show that (1) sill intrusion results in the formation of a dome, with melt erupting at the rim; (2) layering controls the formation of sills and saucer-shaped sills; (3) saucer-shaped sills are fed from the bottom and the fluid flows upward and outward; and (4) the diameter of saucer-shaped sills increase with increasing emplacement depth. The systematic relation between domes and sills and the depth-dependence of sill diameters show that saucer-shaped intrusions result from the interaction between a growing flat-lying shallow sill and doming of the free surface. We conclude that saucer-shaped intrusions represent fundamental geometries formed by shallow magma intrusion in stratified basins.     

Forsterite‐rich accretionary rims around calcium‐aluminum‐rich inclusions from the reduced CV3 chondrite Efremovka

Abstract— It was suggested that multilayered accretionary rims composed of ferrous olivine, andradite, wollastonite, salite‐hedenbergitic pyroxenes, nepheline, and Ni‐rich sulfides around Allende calcium‐aluminum‐rich inclusions (CAIs) are aggregates of gas‐solid condensates which reflect significant fluctuations in physico‐chemical conditions in the slowly cooling solar nebula and grain/gas separation processes. In order to test this model, we studied the mineralogy of accretionary rims around one type A CAI (E104) and one type B CAI (E48) from the reduced CV3 chondrite Efremovka, which is less altered than Allende. In contrast to the Allende accretionary rims, those in Efremovka consist of coarse‐grained (20–40 μm), anhedral forsterite (Fa_1–8), Fe, Ni‐metal nodules, amoeboid olivine aggregates (AOAs) and fine‐grained CAIs composed of Al‐diopside, anorthite, and spinel, ± forsterite. Although the fine‐grained CAIs, AOAs and host CAIs are virtually unaltered, a hibonite‐spinel‐perovskite CAI in the E48 accretionary rim experienced extensive alteration, which resulted in the formation of Fe‐rich, Zn‐bearing spinel, and a Ca, Al, Si‐hydrous mineral. Forsterites in the accretionary rims typically show an aggregational nature and consist of small olivine grains with numerous pores and tiny inclusions of Al‐rich minerals. No evidence for the replacement of forsterite by enstatite was found; no chondrule fragments were identified in the accretionary rims. We infer that accretionary rims in Efremovka are more primitive than those in Allende and formed by aggregation of high‐temperature condensates around host CAIs in the CAI‐forming regions. The rimmed CAIs were removed from these regions prior to condensation of enstatite and alkalies. The absence of andradite, wollastonite, and hedenbergite from the Efremovka rims may indicate that these rims sampled different nebular regions than the Allende rims. Alternatively, the Ca, Fe‐rich silicates rimming Allende CAIs may have resulted from late‐stage metasomatic alteration, under oxidizing conditions, of original Efremovka‐like accretionary rims. The observed differences in O‐isotope composition between forsterite and Ca, Fe‐rich minerals in the Allende accretionary rims (Hiyagon, 1998) suggest that the oxidizing fluid had an ¹⁶O‐poor oxygen isotopic composition.