Reservoir architecture and fracture characterization of low-permeability sandstone reservoir: a case study of Biandong oilfield,Jinhu depression,northern Jiangsu Basin,China

Fracture is one of the most important factors through the whole process of low-permeability reservoir development. Biandong oilfield is a typical low-permeability fractured sandstone reservoir, and has stepped into high water cut stage; thus, the waterflooding effect is poor. Therefore, many contradictions such as high moisture content, decreasing production speed, and low recovery efficiency are becoming increasingly prominent, which have seriously hindered the sustainable development, and need to be solved urgently. However, few such studies on reservoir characterization in low-permeability fractured sandstone reservoir have been conducted in China. In this study, through comprehensive analysis on reservoir characterization and sedimentary environment, significant results are achieved. Three types of fracture occurrence are identified; they are high-angle fracture, low-angle fracture, and horizontal fracture, respectively. Two types of reservoir pore (primary porosity and secondary porosity) are recognized based on thin-section observation and analysis. The diagenetic stage of Biandong oilfield are divided into three stages, early A, early B, and late A, respectively. Finally, a regional discrete fracture network model is established with Fisher’s algorithm based on three-dimensional geological model. All the research results presented above can make a significant instructing function for making reservoir development plan and improving recovery efficiency.     

Petrography and geochemistry of the Upper Cretaceous Nubia sandstones,Eastern Desert,Egypt: implications for provenance,paleoweathering, and tectonic setting

The provenance of the Upper Cretaceous Nubia sandstones from four vertical sections along Qena-Safaga and Qena-Quseir roads in central Eastern Desert of Egypt was investigated based on their modal composition and geochemical data. The Nubia sandstone samples are abundant in quartz content with low feldspar and lithic fragments. Their average modal composition (Q_94.2F_1.3R_4.5) classifies them as quartz arenites with subordinate quartz wackes which is consistent with geochemistry data. The average CIA, CIW, PIA, and Th/U ratio values revealed that the intensity of weathering in the studied areas was similar, varying from moderate to intensive weathering, and may reflect low-relief and warm humid climatic conditions in the source area. The ICV (<?1) and SiO₂/Al₂O₃ ratio (>?5) indicate that the Nubia sandstones are texturally and mineralogically mature. The petrographical and geochemical analyses suggest that the Nubia sandstones were mainly derived from felsic (granitic) and/or recycled sand sources. The major element-based multidimensional tectonic discrimination diagrams suggested the Nubia sandstones were deposited in a passive continental margin of a syn-rift basin. This result agreed with the general geology of central Eastern Desert of Egypt during the Upper Cretaceous.     

Modulus of subgrade reaction that varies with magnitude of displacement of cohesionless soil

Modulus of subgrade reaction is one of the required design parameters in any structural analyses of shallow foundations. However, the constant values of modulus of subgrade reaction that are determined from either from literature studies or the results of plate load tests, regardless of magnitude of soil’s displacement under design loads, have been used in structural designs of foundations. In this study, the results of 43 published full-scale field plate load tests in cohesionles soils were gathered to expose any variation in the values of modulus of subgrade reaction as soil’s displacement increases. Extensive finite element (FE) analyses were carried out while the results of FE analyses were compared with actual measured results of field load tests. The results of analyses indicated that both the modulus of subgrade reaction decrease with increase in magnitude of displacement of soils and internal forces of a design of structural frame is higher with the values of modulus of subgrade reaction that are sensitive to soil’s displacement are implemented into analyses. Therefore, structural dimensions of any structure with the constant values of modulus of subgrade reaction would not be a precise engineering solution.     

Coastal erosion in the south-eastern Mediterranean: case of beaches in North Tunisia

This research is conducted as part of a Spanish International Cooperation Agency project with the aim to investigate the sustainable protection of Tunisian coastal zones, as in the case of Beni Khiar and Dar Chaabane coasts (Hammamet Gulf) separated by Oued El Kebir river. The sedimentary dynamic of these beaches is studied in order to identify the main causes responsible for their erosion by the use of different approaches of in situ measurements and numerical methods. Geophysical surveys and sedimentary analyses have demonstrated that sediments are finer and less carbonated from Beni Khiar to Dar Chaabane. Then, the shoreline mapping of several missions of aerial photos has illustrated a mean shoreline retreat between 3 and 4 m/year. In terms of sand volume, a sediment loss more than 30,000 m³/year at Dar Chaabane has been observed since the hill lake structures were built within Oued El Kebir river in 1996. Finally, modelled hydrodynamic and sedimentary patterns have illustrated the refraction of waves in deep water close to shoals and a high-energy concentration along Dar Chaabane coast. The sediment transport direction is mainly of NE-SW induced by ESE-SE wave-driven alongshore current. Results provided by these approaches have shown the importance of Oued El Kebir sediment yield in supplying the neighbouring beaches. Changes in sedimentary dynamics are affected by the modification of hydrodynamic patters caused by the presence of hydrological dams and the implementations of hotels close to the shoreline. This finding underlines the key role of Oued El Kebir fluvial activity in controlling the equilibrium of beaches and their sensitivity to coastal managements induced by man activities, as in the case of the most Mediterranean beaches.     

Multi-temporal scale modeling on climatic-hydrological processes in data-scarce mountain basins of Northwest China

Previous studies showed that the climatic processes drive the streamflow of the inland river in Northwest China. However, it is difficult to quantitatively assess the climatic-hydrological processes in the ungauged mountainous basins because of the scarce data. This research developed an integrated approach for multi-temporal scale modeling the climatic-hydrological processes in data-scarce mountain basins of Northwest China by combining downscaling method (DM), backpropagation artificial neural network (BPANN), and wavelet regression (WR). To validate the approach, we also simulated the climatic-hydrological processes at different temporal scales in a typical data-scarce mountain basin, the Kaidu River Basin in Northwest China. The main results are as follows: (i) the streamflow is related with regional climatic change as well as atmosphere-ocean variability, (ii) the BPANN model well simulated the nonlinear relationship between the streamflow and temperature and precipitation at the monthly temporal scale, and (iii) although the annual runoff (AR) appears to have fluctuations, there are significant correlations among AR, annual average temperature (AAT), annual precipitation (AP), and oscillation indices, which can be simulated by equations of WR at different temporal scales of years.     

Dynamical evolution properties of debris flows controlled by different mesh-sized flexible net barriers

Because the flexible net barrier is a gradually developed open-type debris-flow counter-measure, there are still uncertainties in its design criterion. By using several small-scale experimental flume model tests, the dynamical evolution properties of debris flows controlled by large and small mesh-sized (equal to D₉₀ and D₅₀, respectively) flexible net barriers are studied, including the debris flow behaviors, segregation, and permeability of sediments, as well as the energy absorption rates and potential overtopping occurring when debris flows impact the small mesh-sized one. Experimental results reveal that (a) two sediment deposition patterns are observed depending on variations in debris flow textures and mesh sizes; (b) the aggregation against flexible net barriers is dominated by flow dynamics; (c) the segregation and permeable functions of the barrier are determined by the mesh size, concentration, and flow dynamics; and (d) the smaller mesh-sized flexible net barrier tends to be more efficient in restraining more turbulent debris flows and can absorb greater rate of kinematic energy, and finally, the great kinematic energy dissipation that occurs when secondary debris flows interact with the post-deposits in front of the small mesh-sized flexible net barrier is believed to cause the failure of overtopping phenomenon. The mesh size is concluded to be the decisive parameter that should be associated with debris flow textures to design the control functions of flexible net barriers.     

A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

Late Cretaceous–Early Paleogene tectonic events at Farafra-Abu Minqar Stretch,Western Desert,Egypt: results from calcareous plankton

This work depends on integrated high-resolution calcareous plankton nannofossil and foraminiferal biostratigraphic analyses for three Upper Cretaceous-Lower Paleogene successions at Farafra-Abu Minqar area, Western Desert, Egypt. These sections are distributed in a north-south geologic profile as follows: El Aqabat, North Gunna, and Abu Minqar. Lithostratigraphically, four formations are recorded in the study area, namely, Khoman (at base), Dakhla, Tarawan, and Esna (at top). In the north at El Aqabat section, Khoman Formation (carbonate facies) is only represented which changes partially toward the south to Dakhla Formation (siliciclastic facies). In the extreme south at Abu Minqar section, it changes completely into siliciclastic facies of Dakhla Formation. Biostratigraphically, seven calcareous nannofossil and eleven planktonic foraminiferal zones represent the Late Cretaceous-Early Paleogene are identified. Based on the occurrence or missing of these zones accompanied with the field criteria resulted in detecting four tectonic events. These tectonic events took place at the Cretaceous/Paleogene (K/Pg), the Danian/Selandian (D/S), the Selandian/Thanetian (S/T), and the Paleocene/Eocene (P/E) boundaries. These tectonic events are related to the impact of the Syrian Arc System. Four sequence boundaries (SB1, SB2, SB3, and SB4) are defined in the Late Cretaceous-Early Paleogene sequence in the Farafra-Abu Minqar area.     

Biostratigraphy and paleogeography of the southeast desert phosphorites of Jordan

Three sections from the Al-Hisa Phosphorite Formation (AHP) were measured in the southeastern desert of Jordan: Batn El-Ghoul, Nagb Etayyeg, and Zgaimat Al-Hasah. A fourth section, Wadi Arfa, is added from a previous work. The three sections differ from the typical AHP Formation in central Jordan by having highly reduced thicknesses, omission/non-deposition of the underlying formations, rarity of fossils, abundant sand, and their stratigraphic ages. A Paleocene-Early Eocene age, based on calcareous nannofossils, has been assigned to the AHP Formation of the sections studied in the southeast desert. This Paleocene-Early Eocene age is younger than the Early Maastrichtian age of the AHP deposits in central Jordan. The published ages of the phosphorite deposits in the eastern Mediterranean countries suggest a younging to the east due to an interplay between paleodepositional environments and plate tectonics (paleohigh formation). The minor phosphorite deposits of Turkey and Iran are not involved in the discussion because they were not part of the Afro-Arabian Plate or the later Arabian Plate. The abovementioned differences between the southeastern desert phosphorites and the central Jordan deposits are here explained by the formation of paleohighs on the Neo-Tethys seafloor during the Late Cretaceous-Eocene. These include the Sirhan Paleohigh where the southeast desert phosphorites were deposited. The formation of the highs was due to the compression associated first, with the subduction of the Afro-Arabian Plate, below the Eurasian Plate and later with their collision.