Variability in Particle Mixing Rates in Sediments with Polymetallic Nodules in the Equatorial Eastern Pacific as Determined from Measurements of Excess <Superscript>210</Superscript>Pb

Radionuclide activities of ²¹⁰Pb and ²²⁶Ra were measured to determine bioturbation coefficients (D_b) in seven sediment cores from the Korean licensed block for polymetallic nodules in the Clarion–Clipperton Fracture Zone. Variability in D_b is considered in the context of the sedimentological, geochemical, and geotechnical properties of the sediments. D_b values in the studied cores were estimated using a steady-state diffusion model and varied over a wide range from 1.1 to 293 cm²/yr with corresponding mixing depths (L) of 26 to 144 cm. When excepting for spurious results obtained from cores where diffusive mixing does not apply, D_b values range from 1.1 to 9.0 cm²/yr with corresponding mixing depths (L) of 26 to 63 cm. Such wide variability in D_b and L values is exceptional in sites with water depths of ～5000 m and is attributed in this study to an uneven distribution of sediment layers with different shear strengths and total organic carbon (TOC) contents, caused by erosion events. The studied cores can be grouped into two categories based on lithologic associations: layers with high maximum shear strength (MSS) and low TOC content, showing a narrow range of D_b values (1.1–9.0 cm²/yr); and layers with low MSS and high TOC content, yielding much higher D_b values of over 30 cm²/yr. The distribution of different lithologies, and the resultant spatial variability in MSS and labile organic matter content, controls the presence and maximum burrowing depth of infauna by affecting their mobility and the availability of food. This study provides a unique case showing that shear strength, which relates to the degree of sediment consolidation, might be an important factor in controlling rates of bioturbation and sediment mixing depths.     

Experiments on Surface Waves Interacting with Flexible Aquatic Vegetation

Surface wave interaction with aquatic vegetation appears to play a key role in coastal hydro-morpho-dynamics. As an example, the presence of a dense meadow at intermediate water depth is usually associated with a stable and resilient shore. Wave-meadow interactions are investigated here by means of physical modelling, with a focus on wave height distribution and hydrodynamics. The central part of a wave flume is covered by flexible artificial seagrass, composed of polyethylene leaves. This vegetation is tested in both near emergent and submerged conditions. The wave height reduction is evaluated by means of a drag coefficient defined from linear wave theory, which contains all the unknowns of the adopted methodology. The behaviour of such a coefficient is investigated as a function of a wave related Reynolds number. The influence of the flexibility of the leaves is also considered, together with a wave frequency parameter. The results show a complex behaviour with three different trends for near rigid, intermediate or highly flexible leaves. Amplitudes of the orbital velocities are investigated and show a fairly good match with the linear wave theory. On the contrary, the mean velocity along the water column appears to be modified by the seagrass for submerged leaves.     

Free Vibration Analysis of Symmetrically Laminated Composite Plates on Elastic Foundation and Coupled with Stationary Fluid

Free vibration analysis of symmetrically laminated composite plates resting on Pasternak elastic support and coupled with an ideal, incompressible and inviscid fluid is the objective of the present work. The fluid domain is considered to be infinite in the length direction but bounded in the depth and width directions. In order to derive the eigenvalue equation, Rayleigh-Ritz method is applied for the fluid-plate-foundation system. The efficiency of the method is proved by comparison studies with those reported in the open literature. At the end, parametric studies are carried out to examine the impact of different parameters on the natural frequencies.     

Variations in turbulent energy dissipation and water column stratification at the entrance of a tidally energetic strait

We observed tidal currents, turbulent energy dissipation and water column stratification at the entrance of a narrow strait (Neko Seto) in the Seto Inland Sea, Japan, using a free-falling turbulent microstructure profiler (TurboMAP) and acoustic Doppler current profiler (ADCP). The variation in turbulent energy dissipation at the entrance of the strait was not at quarter-diurnal frequency but at semi-diurnal frequency; turbulent energy dissipation was enhanced during the ebb tide, although it was moderate during the flood tide. This result is consistent with the results of Takasugi (1993), which showed the asymmetry of tidal energy loss during a semidiurnal tidal cycle using control volume analysis. It is suggested that significant turbulent energy dissipation is generated in the strait, which influences the properties of water outside the strait when tidal currents flow out from the strait.     

Discrimination of spurious self-correlation in nondimensionalized analyses of fluid dynamical data

Nondimensionalization of variables enables us to treat experiment data much more simply and efficiently by decreasing the number of variables. In some cases, trivial conclusions (which Kenney, 1982, called spurious self-correlation) result from a formal application of dimensional analyses. In contrast, in some cases fully significant conclusions can be derived. We first discuss how to construct nondimensional variables retaining the physical meanings of variables. We then propose simple and efficient methods, especially the use of “spurious triangle (SpT)”, to discriminate between significant conclusions and spurious self-correlations in the analysis of nondimensionalized variables.     

Bathymetry enhancement by altimetry-derived gravity anomalies in the East Sea (Sea of Japan)

The gravity-geologic method (GGM) was used to enhance the bathymetry of the East Sea (Sea of Japan) with satellite altimetry-derived free-air gravity anomalies and shipborne depth measurements. By comparison with the bathymetry model of Smith and Sandwell’s (SAS) approach (1994), GGM was found to have an advantage with short wavelength (≤12 km) components, while SAS better predicts longer wavelength (≥25 km) components, despite its dependency on density contrast. To mitigate this limitation, a tuning density contrast of 10.25 g/cm³ between seawater and the seafloor was primarily estimated by the downward continuation method and then validated by the check points method with GGM. Similarly, SAS is limited by the “A” value in low-pass part of the Wiener filter, which defines the effective range of the wavelength components on bathymetry. As a final result, we present an enhanced GGM bathymetry model by integrating all available data.     

Prediction of riverine suspended sediment discharge using fuzzy logic algorithms, and some implications for estuarine settings

The ability of fuzzy logic algorithms to model relationships between stream flow and suspended sediment discharge was investigated using daily measurements of stream flow and suspended sediment discharge for the Escanaba River mouth station, situated on the shore of Lake Michigan and operated by the US Geological Survey. Three different configurations of inputs were applied, whereby the inputs were fuzzified into fuzzy subsets of variables by means of triangular membership functions. The relationships between inputs and suspended sediment discharge (output) were represented by a set of fuzzy rule expressed in IF–THEN format. The weighted average method served for defuzzification. The commonly used sediment rating curve was also applied to the data, and its performance compared with that of the three models by means of statistical analyses. For all three models, suspended sediment discharge predicted by the fuzzy logic algorithm was in satisfactory agreement with observations. Furthermore, the fuzzy logic algorithms performed better than the sediment rating curve, particularly at higher rates of suspended sediment discharge (in this study, more than 50  × 10⁶ g/day). Considered collectively, the use of fuzzy logic algorithms is suggested as a simple and effective approach for better prediction of suspended sediment discharge, also for estuaries.     

SAR-imaged spiral eddies in Mutsu Bay and their dynamic and kinematic models

A pattern of slick streaks winding into a spiral, known as a spiral eddy, was identified in 5 images taken by the ERS-1/2 synthetic aperture radar (SAR) in Mutsu Bay (Japan); dynamic and kinematic models of these spiral eddies have been proposed. Common characteristics of the five spiral eddies are: 1) an eddy diameter of about 15 km; 2) their location in the western part of the bay; and 3) their cyclonic direction of rotation. Moreover, the wind conditions over the bay were common: prior to acquiring the images, a strong easterly wind continued blowing for more than one day. The wind field on the bay is known to be orographically steered and has strong windstress vorticity, which generates cyclonic circulation. The diameter and location of the circulation simulated with a numerical ocean model corresponded well to those of the identified spiral eddies. Based on these facts, we propose a dynamic model for the movement of a slick streak, and a kinematic model for the formation of a spiral eddy. We have assumed calm air, a microlayer and seawater with a cyclonic circulation in the dynamic model. The balance of forces is established in the microlayer among the frictional force from the seawater, the frictional force from the calm air, the gravitational force, and the Coriolis force. As a result, the velocity vector of the microlayer deflects slightly towards the center of the cyclonic circulation. We have assumed a point source of the microlayer in the kinematic model. The shapes of a slick streak simulated with the models agree well with the identified patterns in the SAR images.     

Estimation of the <Emphasis Type="Italic">in situ</Emphasis> Ultraviolet-A absorption of seawater by a simple irradiance inversion model

An irradiance inversion model to estimate the in situ absorption coefficient of seawater has been developed for the Ultraviolet-A (UVA) wavelength domain. Input parameters are sun angle and the up-and downward planar irradiances measured for at least two depths. The present method does not require seawater to be sampled, and is a discrete wavelength method which returns the absorption coefficient at a given wavelength from the irradiances measured at that wavelength without assuming a spectral shape of any optical properties a priori. Comparison between the model results and spectrophotometric measurements shows that the model is practically useful when cloud cover in the atmosphere is ≤ 50%. According to the present method, measurements of the irradiances enable simultaneous observation of the in situ underwater UVA radiation level and the absorption capacity of bulk seawater using a radiometer.