Dynamic Properties of Soft Clay and Loose Sand from Seismic Centrifuge Tests

Appropriate evaluation of shear modulus and damping characteristics of soils subjected to dynamic loading is key to accurate seismic response analysis and soil modeling programs. Dynamic centrifuge experiments were conducted at C-CORE (Memorial University of Newfoundland) centrifuge center to investigate the dynamic properties and seismic response of soft clay and dry loose sand strata. Soft clay with shear strength of about 30 kPa and well graded silica sand at about 35% relative density were employed in a rigid container to simulate local site effects. Several earthquake-like shaking events were applied to the model to evaluate variation of shear modulus and damping ratio with shear strain amplitude and confining pressure, and to assess their effects on site response. The estimated modulus reduction and damping ratio were compared to the predictions of empirical formulae and resonant column tests for both soft clay and loose sand. The evaluated shear modulus and damping ratio were found to be dependent on confining pressure in both soil types. Modulus variation in both soils agreed well with the empirical curves and resonant column test results. However, the sand modulus values were slightly higher than the empirical relations and resonant column tests. This discrepancy is attributed to higher stress and densification of sand during large amplitude shaking applied to the model. The damping ratio at shear strains lower than 0.5% was in reasonable agreement with the empirical curves and the resonant column tests in both clay and sand models, but was generally higher at shear strain larger than 0.5%.     

Mediterranean Sea and anthropogenic influences on ambient vibration amplitudes in the low-frequency and high-frequency domains in the Algiers region

Ambient vibrations have been continuously recorded at Dar El Beida, about 20 km from Algiers (Algeria). This data set allows determining that, in the low-frequency domain (<1 Hz), ambient vibration sources are mainly linked to Mediterranean Sea effects, while in the high-frequency domain, they are closely related to anthropogenic activity. Climatic conditions have an influence on the ambient vibration spectral amplitudes in the low-frequency domain, which is not the case in the high-frequency domain. The limit between the low-frequency and high-frequency domain, based on natural versus anthropogenic activity, is not clear cut and lies between 1.25 and 1.50 Hz. Variations of H/V peak amplitudes in the low-frequency domain are clearly linked to the climatic conditions. In the high-frequency domain, H/V peaks are not related to climatic conditions and cannot be clearly related to anthropogenic source changes.     

Modeling and simulation of hybrid anaerobic/aerobic wastewater treatment system

Modeling and simulation using GPS-X software for a packed bed up-flow anaerobic sludge blanket followed by a biological aerated filter were studied. Both treatment units were packed with a non-woven polyester fabric as a bio-bed. The system was operated at a hydraulic and organic loading rate of 9.65 m³/m²/d and 2.64 kg BOD₅/m³/day. Verification of the experimental results and calibration of the model were carried out prior simulation and modeling. Variables under consideration were HLR, OLR, and surface area of the packing material. HLR and OLR are increased incrementally until the break through point has been achieved. The results obtained from modeling indicated that the treatment system has great potential to be used as an ideal and efficient option for high hydraulic and organic loading rates up to 19.29 m³/m²/d and 4.48 kg BOD₅/m³/day. The model indicated that increasing the input HLR and OLR loads to the treatment system up to 50 % of the original values achieved removal efficiencies 98 % for TSS, 88 % for BOD₅, and 85 % for COD. Moreover, increasing the HLR to four times the original value (38.59 m³/m²/d) reduced the efficiency of the treatment system to 50 % for COD and BOD₅. However, the removal rates of TSS, TKN, and TP were not affected. Also, the modeling results indicated that increasing the surface area of the packing material increased the overall efficiency of the treatment system.     

Contributions of gravity and field data on the structural scheme updating of the Tellian domain and its foreland (Nefza-Bizerte region,northern Tunisia)

International Journal of Earth Sciences - The Nefza-Bizerte region, eastern part of the Tunisian Alpine chain, covers the thrust sheets domain called the Tell and its Atlassic foreland. The deep...     

Groundwater characterization and quality assessment,and sources of pollution in Madinah,Saudi Arabia

Groundwater quality in the Madinah city is increasingly endangered by expanding urbanization, industrial activities, and intensified agricultural land use. In order to investigate the pollution of Madinah groundwater resources, 32 samples have been gathered and examined for major, trace, and nutrient components. Results of groundwater characterization and groundwater quality assessment show that Na⁺ and Cl^? are the main anion and cation in the groundwater, respectively. Depletion of HCO₃ that interacts with water increases salinity. Cluster analysis and principal component analysis were applied in the current study to obtain relationship between parameters and sampling site in order to identify the factors and sources influencing groundwater quality. The CA allowed the formation of three clusters between the sampling wells reflecting differences on water quality at different locations. Four major PCs were extracted, which accounted 86.05 % variance of the original data structure. Forty-four percent of the groundwater samples have high values of NO₃, due to human and agricultural activities. Four samples in the southwestern part of the study area show high content of Pb, Cd, Cr, Ni, As, and Al. This may be due to the influence of anthropogenic activities that resulted from the southwestern industrial area of Madinah. The present study illustrates explicitly the stress on groundwater quality and its vulnerability in the aquifer system.     

Environmental rethinking of wastewater drains to manage environmental pollution and alleviate water scarcity

Natural Hazards - The conservation of water resources in developed countries has become an increasing concern. In integrated water resource management, water quality indicators are critical. The...     

Experimental superheating of water and aqueous solutions

The metastable superheated solutions are liquids in transitory thermodynamic equilibrium inside the stability domain of their vapor (whatever the temperature is). Some natural contexts should allow the superheating of natural aqueous solutions, like the soil capillarity (low T superheating), certain continental and submarine geysers (high T superheating), or even the water state in very arid environments like the Mars subsurface (low T) or the deep crustal rocks (high T). The present paper reports experimental measurements on the superheating range of aqueous solutions contained in quartz as fluid inclusions (Synthetic Fluid Inclusion Technique, SFIT) and brought to superheating state by isochoric cooling. About 40 samples were synthetized at 0.75 GPa and 530-700 °C with internally-heated autoclaves. Nine hundred and sixty-seven inclusions were studied by micro-thermometry, including measuring the temperatures of homogenization (Th: L + V → L) and vapor bubbles nucleation (Tn: L → L + V). The Th-Tn difference corresponds to the intensity of superheating that the trapped liquid can undergo and can be translated into liquid pressure (existing just before nucleation occurs at Tn) by an equation of state. Pure water (840-935 kg m⁻³), dilute NaOH solutions (0.1 and 0.5 mol kg⁻¹), NaCl, CaCl₂ and CsCl solutions (1 and 5 mol kg⁻¹) demonstrated a surprising ability to undergo tensile stress. The highest tension ever recorded to the best of our knowledge (−146 MPa, 100 °C) is attained in a 5 m CaCl₂ inclusion trapped in quartz matrix, while CsCl solutions qualitatively show still better superheating efficiency. These observations are discussed with regards to the quality of the inner surface of inclusion surfaces (high P-T synthesis conditions) and to the intrinsic cohesion of liquids (thermodynamic and kinetic spinodal). This study demonstrates that natural solutions can reach high levels of superheating, that are accompanied by strong changes of their physico-chemical properties.     

Tectonic relationships of Southwest Iberia with the allochthons of Northwest Iberia and the Moroccan Variscides

The Iberian Massif poses a problem of relationships between its northwestern and southern parts. Suture terranes (ophiolites and high-pressure rocks) crop out in NW Iberia but only as allochthonous units, unconnected from their root zone. Sutures cropping out in SW Iberia are discussed in order to relate them to the unknown root of the NW Iberia allochthons. On the other hand, the Moroccan Variscides are very briefly presented with a view to propose their correlation with the Iberian zones. Particularly important is the transition from the Variscides to the Paleoproterozoic basement in Morocco, which is a key argument for palaeogeographic reconstructions.     

Strontium as a tracer of weathering processes in a silicate catchment polluted by acid atmospheric inputs, Strengbach, France

This paper determines the weathering and atmospheric contributions of Ca in surface water from a small spruce forested silicate catchment (N–E France) receiving acid atmospheric inputs. The bedrock is a granite with K-feldspar and albite as dominant phases. The calcium content in plagioclase is low and the Ca/Na ratio in surface water is high, reflecting other sources of calcium from those expected from the weathering of major mineral phases. The biotite content is low. Only traces of apatite were detected while no calcite was found in spite of a major hydrothermal event having affected the granite. The strontium isotopic ratio ⁸⁷Sr/⁸⁶Sr and Sr content was used as a tracer of weathering and was determined in minerals and bulk bedrock, open field precipitation, throughfall, soil solution, spring and stream water. The Sr isotopic ratio of the reacting weathering end-member was predicted by simulating the alteration of the granite minerals by incorporating strontium into the water–rock interaction kinetic code KINDIS. In the early stages of water–rock interaction, K-feldspar and biotite strongly influence the isotopic composition of the weathering solution whereas, the Na-rich plagioclase appears to be the main long-term reactive weathering end-member. Approximately 50% of dissolved Sr in streamwater are atmospherically derived. The ⁸⁷Sr/⁸⁶Sr ratios of exchangeable Sr in the fine fraction at 1-m depth from a soil profile indicate that the amount of exchangeable Sr seems essentially controlled by atmospheric inputs. The exception is the deep saprolite where weathering processes could supply the Sr (and Ca). Na-Plagioclase weathering obviously control the chemistry and the isotopic composition of surface waters. The weathering of trace mineral plays a secondary role, the exception is for apatite when plagioclase is absent. Our hydrochemical, mineralogical and isotopic investigations show that a major part of the strong Ca losses detected in catchment hydrochemical budgets that result from the neutralization of acid precipitation has an atmospheric origin. Consequently, in the long term, in such areas, the availability of such an exchangeable base cation might be strongly limited and surface waters consequently acidified.     

Uranium mineralized fault zone at Wadi Um Gir locality,Central Eastern Desert,Egypt

The area of Wadi Um Gir, Central Eastern Desert of Egypt, is covered by Basement rocks of Late Precambrian age namely; the postgeosynclinal (Hammamat) sediments, intruded by a bostonite dyke of the younger postorogenic volcanics. The radioactive anomaly discovered at Wadi Urn Gir is a typical vein-type hydrothermal occurrence structurally controlled by a major fault which is among the youngest faults related to the formation of the Red Sea Rift Valley during Tertiary times. The net slip of this fault is determined by the orthographic projection method to be 260 m.Hydrothermal alteration is intense along the fault zone, and is represented by successive bands mainly of hematite, kaolinitic clays, carbonates, etc.The radioactivity is normally distributed in the fresh rocks with anomalous readings connected to the altered bostonite rock in the fault zone. The abnormal high radioactivity is found to be mainly due to secondary uranium mineralization, with a uranium content of 0.065%, and in a radioactive disequilibrium with slight deficiency of daughter elements which may be due to redistribution by the effect of ground water. The uranium mineralization is usually present as fracture-fillings or forming thin fissure veinlets mostly with hematitic alteration bands along the fault zone.Genetically; repeated movement along the major fault resulted in intense fracturing of the bostonite rocks and reopening of the tectonically related fissures. The fault provided an easy channel for the passage of the contemporaneous or immediately ascending uranium-bearing solutions. Subsequently, alteration of bostonite and radioactive mineralization took place in the secondary tension fractures. The physico-chemical conditions of the altered and sheared bostonite rocks afforded the favourable conditions for the deposition of uranium minerals carried by the hydrothermal fluids along the opened fractures.

---

Zusammenfassung Das Gebiet »Wadi Um Gir« in der zentralarabischen Wüste Ägyptens besteht aus Basisgesteinen von Präkambrischem Alter. Es handelt sich um die postgeosynklinale »Hammamat«-Serie, deren Sedimentabfolge von einem Bostonitgang des jüngeren postorogenen Vulkanismus durchbrochen wird.Eine Radioaktivitätsanomalie wurde in »Wadi Um Gir« festgestellt. Sie bildet ein typisch-gangartiges hydrothermales Vorkommen und ist von einem Hauptbruch der mit der Entstehung des Rotmeergrabens verbundenen jungen Brüche bestimmt. Eine Berechnung der Sprunghöhe dieser Verwerfung mit der orthographischen Projektionsmethode ergab einen Wert von 260 m.Intensive hydrothermale Umwandlung der Muttergesteine kommt entlang der Bruchzone vor. Sie besteht unter anderem aus Successiven Streifen von hämatitischem, kaolinitischem und karbonatischem Material.Die Radioaktivität, deren Verteilung in den frischen Gesteinen normal ist, zeigt Anomalien nur noch im Zusammenhang mit dem umgewandelten Bostonit der Bruchzone, wobei die abnormal hohen Radioaktivitäts-Werte mit der sekundären Uran-Mineralisation (Urangehalt 0,065%) in Einklang stehen. Es besteht jedoch durch geringe Verarmung an gewissen Tochterelementen eine Gleichgewichtsstörung. Dies könnte auf die Umverteilung durch Grundwassereinflüsse zurückgeführt werden.Genetische Überlagerungen führen zu der Annahme, daß die wiederholte Bewegung entlang der Hauptbruchzone eine intensive Fraktur der Bostonitgesteine veranlaßt hat. Dies führte zur mehrfachen Öffnung der in Zusammenhang stehenden Spalten und damit bildeten sich Bahnen für die aufsteigenden, syngenetischen, uranhaltigen Lösungen.Die Anlagerung uranhaltiger Mineralien in den sekundären Spannungsbrüchen wurde durch die physiko-chemischen Verhältnisse des umgewandelten und abgescherten Bestonits gewährleistet.

---

Wadi Um Gir - . , , . . , . 260 . . , . , , , . . . , . .. . - .