Assessment of persistent organochlorine pollutants in sediments from Lake Manzala, Egypt

Organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in surface and core sediment samples collected from Manzala Lake, the largest of the Egyptian coastal lakes. Total concentrations of OCPs and ∑7 PCBs (ICES) in sediments ranged from 0.63 to 31.31 ng/g and 0.26 to 31.27 ng/g, respectively. Geographical distribution indicates that levels of contaminants were significantly higher in areas which are mainly influenced by municipal discharge, indicating significant sources of these compounds in urbanised areas. The composition of DDT and its metabolites suggest old input of DDT. The levels of contaminants in Manzala Lake were similar or lower than those observed in comparable areas worldwide. The profiles of ∑OCPs and ∑PCBs in a core from a site heavily impacted by sewage discharge have highest concentrations in the surface core section indicating recent inputs. Assessment of ecotoxicological risk indicated that sediments in two sites were likely to pose potential biological adverse impact.     

Testing the downscaling ability of a one-way nested regional climate model in regions of complex topography

The downscaling ability of a one-way nested regional climate model (RCM) is evaluated over a region subjected to strong surface forcing: the west of North America. The sensitivity of the results to the horizontal resolution jump and updating frequency of the lateral boundary conditions are also evaluated. In order to accomplish this, a perfect-model approach nicknamed the Big-Brother Experiment (BBE) was followed. The experimental protocol consists of first establishing a virtual-reality reference climate over a fairly large area by using the Canadian RCM with grid spacing of 45 km nested within NCEP analyses. The resolution of the simulated climate is then degraded to resemble that of operational general circulation models (GCM) or observation analyses by removing small scales; the filtered fields are then used to drive the same regional model, but over a smaller sub-area. This set-up permits a comparison between two simulations of the same RCM over a common region. The Big-Brother Experiment has been carried out for four winter months over the west coast of North America. The results show that complex topography and coastline have a strong positive impact on the downscaling ability of the one-way nesting technique. These surface forcings, found to be responsible for a large part of small-scale climate features, act primarily locally and yield good climate reproducibility. Precipitation over the Rocky Mountains region is a field in which such effect is found and for which the nesting technique displays significant downscaling ability. The best downscaling ability is obtained when the ratio of spatial resolution between the nested model and the nesting fields is less than 12, and when the update frequency is more than twice a day. Decreasing the spatial resolution jump from a ratio of 12 to six has more benefits on the climate reproducibility than a reduction of spatial resolution jump from two to one. Also, it is found that an update frequency of four times a day leads to a better downscaling than twice a day when a ratio of spatial resolution of one is used. On the other hand, no improvement was found by using high-temporal resolution when the driving fields were degraded in terms of spatial resolution.     

Apport de l'analyse d'images dans l'étude de l'altération d'un basalte alcalin (Moyen Atlas, Maroc)Contribution of image analysis to the study of weathering process in alkaline basalt (Middle Atlas, Morocco)

Quaternary alkaline basalts of Middle Atlas, are weathered into spheroidal volumes organized into weathering cover. In the profile studied, the study of transformations from a fresh core basalt to the most weathered rinds, has been analysed using BESI images (backscattred electron image analysis). A part from the microscopic analysis of each weatherted basalt, proportions of primary minerals, clays and pore space has been quantified in different stages of weathering. Indeed, in fresh core basalt, weathering is characterized by a first dissolution of the glass, followed by feldspar transformations in twinning plans, cleavages and in micropores inherited from the magmatic and cristallographic history of the rock.

In most basaltic weathered rinds, pore spaces given by the dissolution of the glass, were filled by a mixture of clays and iron products. In these samples, feldspars are completely dissolved giving important porosity occupied by small quantity of halloysite and kaolinite. The olivine and pyroxene transformations are accompanied by weak pore space formation. At the bottom of the soil, this porosity decreases in response to filling by later secondary products which come from the upper part of the soil by weathering solutions.     

Sulfur based hazardous waste solidification

Existing uses for sulfur are relatively advanced and offer limited opportunities to consume significant new supplies. Currently, sulfur is in net surplus on a global basis, and with environmental regulations, greater sulfur recovery from petroleum and gas processing is mandated. The outlook is clear: there will be substantial and growing surpluses in global sulfur supply in the foreseeable future. Sulfur prices are likely to be under pressure, and producers could face substantial and growing disposal fees. Therefore, new markets must be found for sulfur to avoid disposal crises. One potential new market is the production of sulfur-solidified concrete. This is a thermoplastic composite of mineral aggregates bound together with chemically modified sulfur. The product is more durable than Portland cement. There may be monetizeable benefits in reducing greenhouse gas emissions that would enhance the attraction of sulfur solidified cement applications. The main objective of this study is to evaluate experimentally the potential use of sulfur as a solidifying agent for hazardous waste. To achieve this objective, the study reviewed the sulfur concrete literature, analyzed locally produced sulfur, evaluated a number of sulfur polymer modifiers and physical stabilizing agents, designed a set of experiments and evaluated the produced product for its hydro-mechanical-chemical properties. The results indicated that the manufactured sulfur polymer cement is an excellent candidate for: waste management practices such as solidification/stabilization of hazardous waste; barrier systems for landfilling of hazardous waste; and waste water treatment plants.     

Modelling flash flood propagation in urban areas using a two-dimensional numerical model

This paper reports on the numerical modelling of flash flood propagation in urban areas after an excessive rainfall event or dam/dyke break wave. A two-dimensional (2-D) depth-averaged shallow-water model is used, with a refined grid of quadrilaterals and triangles for representing the urban area topography. The 2-D shallow-water equations are solved using the explicit second-order scheme that is adapted from MUSCL approach. Four applications are described to demonstrate the potential benefits and limits of 2-D modelling: (i) laboratory experimental dam-break wave in the presence of an isolated building; (ii) flash flood over a physical model of the urbanized Toce river valley in Italy; (iii) flash flood in October 1988 at the city of Nîmes (France) and (iv) dam-break flood in October 1982 at the town of Sumacárcel (Spain). Computed flow depths and velocities compare well with recorded data, although for the experimental study on dam-break wave some discrepancies are observed around buildings, where the flow is strongly 3-D in character. The numerical simulations show that the flow depths and flood wave celerity are significantly affected by the presence of buildings in comparison with the original floodplain. Further, this study confirms the importance of topography and roughness coefficient for flood propagation simulation.     

Impacts of a Ghg-Induced Climate Change on Crop Yields: Effects of Acceleration in Maturation, Moisture Stress and Optimal Temperature

The present study involves using the Canadian Climate Centre (CCC) climate change scenario to evaluate the impacts of a CO₂-induced climate change on agriculture in Québec and vicinity. Climate change using the CCC General Circulation Model (GCM) data are fed into a crop model (FAO) so as to gauge the changes in agroclimatic factors such as growing season length and growing degree days, and subsequently potential yield changes for a variety of cereal (C₃ and C₄), leguminous, oleaginous, vegetable and special crops, for twelve major agricultural regions in southern Québec. Our results show that depending upon the agricultural zone and crop type, yields may increase (ex. corn and sorghum by 20%) or decrease (ex. wheat and soybean by 20 to 30%). Also, these crop yield changes appear to be related to acceleration in maturation rates, mainly to change in moisture stress and to shifts in optimal thermal growth conditions. These possible shifts in agricultural production potentials would solicit the formulation of appropriate adaptation strategies.     

Numerical modeling of tides in the Gulf of Suez,Egypt

A vertically integrated two‐dimensional (2‐D) and a five‐layer three‐dimensional (3‐D) numerical models were developed to compute the tides in the Gulf of Suez, Egypt. The computational grid used to schematize the Gulf has a horizontal resolution of 3 × 3 km and consists of a lattice of 23 × 100 points in the 2‐D model and five such lattices in the 3‐D model. Both 2‐D and 3‐D simulations clearly revealed the Kelvin wave nature of the tide with partial reflection. The M₂ simulations also showed a strong tidal signature in the southern sector as compared to the northern part. For the 3‐D simulations, the horizontal and vertical eddy viscosity coefficients and the coefficient of bottom friction were respectively set to 3 × 10⁶ cm²/s, 200 cm²/s, and 0.001. The tidal range decreases from the entrance of the Gulf of Suez toward the Bank of Tor where it reaches a small value and then increases again to about 1.5 m at Suez. A difference of six hours exists between the times of high water at the southern and northern ends of the Gulf. Quantitatively the agreement between the observed and computed tide is better in the 2‐D simulation than in the 3‐D simulation. However, the counterclockwise gyres in the top three layers of the 3‐D model (upper 30 m) during slack water following the flood tide do not appear in the 2‐D simulation.     

New geophysical and geological evidence for the present day southernmost active deformational front of the Rif thrust-and-fold belt and the oceanic accretionary prism of Cadiz: the Dhar Doum–Lalla Zahra fault, Northwestern Atlantic Coastal Morocco

Combining the results from field observations, high resolution 2D-electric resistivity and high resolution seismic refraction tomography, we have found new evidence for active faulting in the Dhar Doum area, northwestern Atlantic coast of Morocco. Qualitative interpretation of the inverted resistivity and seismic refraction data reveals the presence of two thrust faults that cut the topographic surface and displace the most recent sedimentary deposits. Furthermore, one of these seismically imaged faults strongly correlates with the Dhar Doum?CLalla Zahra fault. The steepening at the surface and the flattening with depth of this fault are likely to indicate an important strike-slip component associated with a major reverse component. If extended offshore to the west, the Dhar Doum fault could be a continuation of the southernmost deformational front of the Cadiz oceanic accretionary prism. Therefore, this structure is very likely to represent the actual active southern deformational front of the oceanic accretionary prism, as well as that of the Rif fold-and-thrust belt. The southward thickening of the growth strata composing the uppermost dune system and the occurrence of Plio-Quaternary conglomerates north of the Dhar Doum?CLalla Zahra fault suggest that the neotectonic activity may have started by the end of the Pliocene and have continued to the present as indicated by the folding-and-faulting of the most recent sedimentary deposits and the presence of high scarps. The identification of active faulting in the study area that may have a profound influence on seismic hazard analysis of the whole Rif foredeep basin.     

Flood hazard in Wadi Rahbaa area, Egypt

In the last decade, attention has been devoted to the southern part of the Egyptian Red Sea coast due to the large touristic and mining activities. Egypt spares no effort to develop it, to build new urban communities, and to create new job opportunities. Many comprehensive planning studies have been conducted. Many luxurious tourist spots, airports, and harbors have been constructed. These areas are subjected to flash floods, which represent a frequent threat to these urbanization activities that may cause losses in livelihood. By analyzing the geomorphologic features of the study area, intense stream networks are detected that, with the available metrological data, require flood management and analysis to mitigate the possible negative effects and to benefit from the estimation of flood water. Rahbaa basin is a sub-catchment of wadi Hodin. Flash floods within this area threaten the Red Sea coastal plain as well as the main coastal roads. It also directly drained out to the sea, which leads to a loss of huge amounts of flood water that is useful for arid regions. Using geographic information system and remote-sensing tools with the application of a comprehensive graphical modeling (watershed modeling system) supports the hydrological modeling of HEC-1. The total amount of runoff is calculated and the hydrograph of the 50-year return period is computed using rainfall historical data.     

Characteristic features of salt tectonics offshore North Sinai, Egypt

Salt tectonic along offshore North Sinai was studied using seismic reflection data. The study revealed and identified various types of salt tectonics and structures in the study area. The triggering mechanism of salt tectonics was attributed to the pressure regime initiated from overloading sediments on the Messinian evaporites. The sediment load of 3,000?m exceeds the critical load (more than 1,000?m) and hence creates a pressure zone. The salt-generated structures resulted from thin-skinned extension that is driven by gravity gliding of the overloading sediments above the Messinian evaporite boundary, which acts as a detachment layer. These structures comprise normal growth faults and keystone grabens, trending roughly perpendicular to the slope of the continental margin. Salt tectonics in the study area were also triggered by the deformation of the movement of evaporite layer that causes stretching and fragmentation of the evaporite layer. Moving salt layer took place laterally and vertically, causing lateral and vertical pressures inside the Pliocene sediments. These movements of sediments led to the formation of salt rollers, salt weld, salt diapirs, rollover structures, and fault blocks. The interpretation of seismic data illustrates that the evaporite layer was switched off between the famous reflector M at its top and another reflector N at its base. M reflector is present and can be traced across the whole study area, while the N reflector pinched out in some parts of the study area.