Determination of sedimentary cover and structural trends in the Central Sinai area using gravity and magnetic data analysis

The present study is an attempt to determine the sedimentary cover, and structural trends in the central part of Sinai Peninsula, Egypt. This study has been implemented by the integration of gravity and magnetic methods. Gravity data has been used for 2D modelling along some profiles perpendicular to the main structural trends of the study area. Magnetic data will be analyzed to determine the depth to the basement surface. The depths obtained from magnetic data will be used as a control points in the gravity modelling in order to minimize the error and facilitate the iteration of the suggested models. The basement relief map from magnetic and gravity output has been produced. This map indicates that, the basement depths, generally, increases from south to north and from east to west direction of the study area. The sedimentary cover is about 1.5-2 km in the southern part and increases to more than 4 km in the northeastern and western parts and changes gradually in the other parts of the study area. Results of structural trend analysis indicate that, the study area is greatly affected by several structural trends; N-S, E-W, NW-SE, and NNE-SSW directions. These trends are associated with the Baltim fault trend, Tethyan trend, Gulf of Suez, and Aqaba trend, respectively.     

Curie point depth beneath the Barramiya-Red Sea coast area estimated from spectral analysis of aeromagnetic data

The geothermal regime beneath the Barramiya-Red Sea coast area of the Central Eastern Desert of Egypt has been determined by using the Curie point depth, which is temperature dependent. This study is based on the analysis of aeromagnetic data. The depth to the tops and centroid of the magnetic anomalies are calculated by power spectrum method for the whole area. The result of this investigation indicates, two new maps of the Curie point depth (CPD) and the surface heat flow (q) maps of the study area. The coastal regions are characterized by high heat flow (83.6 mW/m²), due to the geothermic nature of the region, and shallow Curie depth (22.5 km), where (CPD) depends on the tectonic regime and morphology in the eastern part of the area. The western portion of the studied area has a lower heat flow (<50 mW/m²) and deeper Curie depth (∼40 km), due to the existence of a large areal extent of negative Bouguer anomaly in the NE-SW direction. In addition to its bordering to the Red Sea margin, such high heat flow anomaly is associated with the increased earthquake swarms activity in the Abu Dabbab area.     

Hydrodynamic modeling for groundwater assessment in Sana’a Basin, Yemen

Yemen is a semi-arid country with very limited water resources. Sana’a Basin is located in the central part of Yemen and is the major source of water for drinking and irrigation. High abstraction rates in Sana’a Basin rising from 21.1 million (M) m³ in 1972 to 227.7?Mm³ in 2006, have led to a major decline in water levels and deterioration in groundwater quality. Effective management of groundwater resources in Sana’a Basin can be aided by modelling. FEFLOW was used to build a groundwater flow model for the basin and the model was calibrated under transient conditions for the period 1972–2006. The water balance for transient conditions of the Sana’a Basin in 2006 indicated that the total annual inflow was 116.9?Mm³, and the total annual outflow was 245.8?Mm³. Three scenarios for potential groundwater extraction for the period 2006–2020 are presented. The first represents the present status based on the 2006 extraction rates without introducing any management measures. The second is based on maximum domestic, agricultural and industrial consumption of water resources. The third simulates the effect of water-resource augmentation, i.e. the increase of groundwater recharge, and maximizes sustainability by reducing water consumption. Identified areas of the basin require prompt management action.     

Discovery of an albite gneiss from the Ile de Groix (Armorican Massif, France): geochemistry and LA-ICP-MS U–Pb geochronology of its Ordovician protolith

For the first time, an albite orthogneiss has been recognised and dated within the HP–LT blueschist facies metabasites and metapelites of the Ile de Groix. It is characterised by a peraluminous composition, high LILE, Th and U contents, MORB-like HREE abundances and moderate Nb and Y values. A U–Pb age of 480.8?±?4.8?Ma was obtained by LA-ICP-MS dating of zircon and titanite. It is interpreted as the age of the magmatic emplacement during the Early Ordovician. Morphologically different zircon grains yield late Neoproterozoic ages of 546.6–647.4?Ma. Zircon and titanite U–Pb ages indicate that the felsic magmatism from the Ile de Groix is contemporaneous with the acid, pre-orogenic magmatism widely recognised in the internal zones of the Variscan belt, related to the Cambro-Ordovician continental rifting. The magmatic protolith probably inherited a specific chemical composition from a combination of orogenic, back-arc and anorogenic signatures because of partial melting of the Cadomian basement during magma emplacement. Besides, the late Devonian U–Pb age of 366?±?33?Ma obtained for titanite from a blueschist facies metapelite corresponds to the age of the HP–LT peak metamorphism.     

Origin and evolution of post-collisional volcanism: an example from Neoproterozoic Dokhan volcanics at Gabal Nugara area, Northeastern Desert, Egypt

Nugara volcanics are one of the northernmost outcrops of the Arabian?CNubian Shield. Two distinct volcanic successions are found in the Nugara basin: (1) old volcanic sequence composed of voluminous medium- to high-K calc-alkaline lavas and minor alkali basalt and (2) young volcanic sequence composed of subordinate tholeiitic mafic lavas. Their eruptions were punctuated by occasional volcaniclastic deposits that generated fall, flow, or reworked suites compositionally identical to the lava flows. These volcanics are a part of a post-subduction and extensional-related magmatic event in Northeastern Desert of Egypt. The volcanic rocks of the Nugara basin are characterized by strong enrichment in LILE relative to HESF, high LILE/HFSE ratios, and depletions of Nb on MORB-normalized multi-element diagrams. The geochemical features of the volcanic rocks suggest that they experienced fractional crystallization, along with mixing processes. Crustal contributions to the magma sources may also have occurred during magmatic evolution. These processes have resulted in scattered major and trace element variations with respect to increasing silica contents. The model proposed for their origin involves contrasting ascent paths and differentiation histories through crustal columns with different thermal and density gradients. The geochemical features of the most mafic samples suggest that the volcanic rocks in the region were derived from a mainly lithospheric mantle source that had been heterogeneously metasomatized by previous subduction events during convergence between the East and West Gondwanaland. The volcanic activity in the region is best explained by the delamination of lithospheric mantle slices that were heterogeneously enriched by previous subduction-related processes.     

Grouting Rock Fractures with Cement Grout

The radial flow rate of a cement grout in a rock fracture is obtained from Bingham’s relation and the fact that the power expended by the injection mechanism is the energy dissipated by viscous effects. The energy balance reveals that the advance ratio is of fundamental importance in the grouting process and is inherently related to the rest and advance phases of a cement grout. This allows giving a precise definition of the zero flow path that divides the energy diagram into two distinct domains for advancing and non-advancing grout. The advance ratio and the zero flow path are used to explore the grouting of one or more fractures, analyze the GIN model in the context of the SL dispute, draw a terminal sequence considering the energy interval alternative, and reformulate the refusal criterion of the North American grouting method. Secondary grouting effects are also investigated.     

Strain analysis and microstructural evolution characteristic of neoproterozoic rocks associations of Wadi El Falek,centre Eastern Desert,Egypt

The estimation of finite strain in rocks is fundamental to a meaningful understanding of deformational processes and products on all scales from microscopic fabric development to regional structural analyses. The R_f/φ and Fry methods on feldspar porphyroclasts and mafic grains from 5 granite, 1 metavolcanic, 3 metasedimentary and 1 granodiorite samples were used in Wadi El Falek region. Finite-strain data shows that a high to moderate range of deformation of the granitic to metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.60 to 4.10 for the R_f/φ method and from 2.80 to 4.90 for the Fry method. Furthermore, the short axes are subvertical associated with a subhorizontal foliation. We conclude that finite strain in the deformed granite rocks is of the same order of magnitude as that from metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Wadi El Falek area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the nappe contacts formed during the accumulation of finite strain.     

The spatial extent of tephra deposition and environmental impacts from the 1912 Novarupta eruption

The eruption of Novarupta within the Katmai Volcanic Cluster, south-west Alaska, in June 1912 was the most voluminous eruption of the twentieth century but the distal distribution of tephra deposition is inadequately quantified. We present new syntheses of published tephrostratigraphic studies and a large quantity of previously un-investigated historical records. For the first time, we apply a geostatistical technique, indicator kriging, to integrate and interpolate such data. Our results show evidence for tephra deposition across much of Alaska, Yukon, the northern Pacific, western British Columbia and northwestern Washington. The most distal tephra deposition was observed around 2,500?km downwind from the volcano. Associated with tephra deposition are many accounts of acid deposition and consequent impacts on vegetation and human health. Kriging offers several advantages as a means to integrate and present such data. Future eruptions of a scale similar to the 1912 event have the potential to cause widespread disruption. Historical records of tephra deposition extend far beyond the limit of deposition constrained by tephrostratigraphic records. The distal portion of tephra fallout deposits is rarely adequately mapped by tephrostratigraphy alone; contemporaneous reports of fallout can provide important constraints on the extent of impacts following large explosive eruptions.     

Delineation of Shallow Subsurface Structure by Azimuthal Resistivity Sounding and Joint Inversion of VES-TEM Data: Case Study near Lake Qaroun, El Fayoum, Egypt

An azimuthal resistivity survey was conducted at the transition zone between the desert area and the cultivated land near Lake Qaroun, Egypt. This area has been affected by an east-west trending fault system as indicated from the surface geology. Apparent resistivity values were plotted along azimuth on a polar diagram. Resistivity anomalies, for most of the AB/2 values with long axes strike in a direction parallel to the contact between the desert and cultivated lands, indicate the presence of electrical macro-anisotropy, mainly due to the faulting effect, at this area. Vertical electrical soundings (VES) and transient electromagnetic (TEM) measurements were conducted at eight stations along a line that crosses the boundary between the desert and cultivated land. Joint inversion of VES-TEM data was successfully used for identification of the subsurface lithostratigraphic succession and demonstrated the effect of the fault zone on the investigated subsurface medium. Apparent anisotropy coefficients at all current electrode spacings were calculated, plotted against AB/2 values and compared with the geoelectrical cross section. The effect of the fault zone was detected at AB/2 spacings equal to 100 m and extended downward and is largely related to the depth of the fault, as indicated in the constructed cross section.