Estimating Flow Using Tracers and Hydraulics in Synthetic Heterogeneous Aquifers

Regional ground water flow is most usually estimated using Darcy's law, with hydraulic conductivities estimated from pumping tests, but can also be estimated using ground water residence times derived from radioactive tracers. The two methods agree reasonably well in relatively homogeneous aquifers but it is not clear which is likely to produce more reliable estimates of ground water flow rates in heterogeneous systems. The aim of this paper is to compare bias and uncertainty of tracer and hydraulic approaches to assess ground water flow in heterogeneous aquifers. Synthetic two-dimensional aquifers with different levels of heterogeneity (correlation lengths, variances) are used to simulate ground water flow, pumping tests, and transport of radioactive tracers. Results show that bias and uncertainty of flow rates increase with the variance of the hydraulic conductivity for both methods. The bias resulting from the nonlinearity of the concentration–time relationship can be reduced by choosing a tracer with a decay rate similar to the mean ground water residence time. The bias on flow rates estimated from pumping tests is reduced when performing long duration tests. The uncertainty on ground water flow is minimized when the sampling volume is large compared to the correlation length. For tracers, the uncertainty is related to the ratio of correlation length to the distance between sampling wells. For pumping tests, it is related to the ratio of correlation length to the pumping test's radius of influence. In regional systems, it may be easier to minimize this ratio for tracers than for pumping tests.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

On the inclusion of ground-based gravity measurements to the calibration process of a global rainfall-discharge reservoir model: case of the Durzon karst system (Larzac, southern France)

This work examines the relevance of the inclusion of ground-based gravity data in the calibration process of a global rainfall-discharge reservoir model. The analysis is performed for the Durzon karst system (Larzac, France). The first part of the study focuses on the hydrological interpretation of the ground-based gravity measurements. The second part of the study investigates further the information content of the gravity data with respect to water storage dynamics modelling. The gravity-derived information is found unable to either reduce equifinality of the single-objective, discharge-based model calibration process or enhance model performance through assimilation.     

Possibility of investigation of the microstreams and associations by the radiotomographic method

This article contains the tomographic problem's solution of the radiants distribution study by the meteor radar data. It was received the distribution of meteors velocities for the parts of celestial sphere with angular dimensions 10° × 10° and 1° × 1°. Was shown that the angular dimensions of most of radiants are equal 1° – 3° and larger part of the sporadic background looks like a totality of microstreams.     

Oil spill sorption using carbonized pith bagasse: trial for practical application

In the present work, an attempt was made to provide an efficient, easily deployable method of cleaning up oil spills and recovering of the oil. Carbonized pith bagasse, a relatively abundant and inexpensive material is currently being investigated as an adsorbent to remove contaminants “oil” from water. Fibers extracted from bagasse and carbonized at 300 °C were found to have a high performance for sorption and recovery of light, heavy oils and even the viscous ones. The physical properties of pith bagasse were investigated using scanning electronic microscope to show the inner and the outer surface and the cross section area of the pith bagasse and thermo gravimetric analyzer to investigate the degradation profile of the pith bagasse. The carbonized pith bagasse was packed into a polypropylene bag and its sorption behavior was studied. A comparison was made between the prepared pad and the commercial sorbents show that the pad containing carbonized pith bagasse has higher sorption capacity in comparison to the commercial sorbents. The pad exhibited high oil retention ability and a high selectivity for the oils over the water. The pad showed a possibility of reuse for eight times. The sorption capacity of the pads containing carbonized pith bagasse was found to increase with increasing the time of sorption till it reaches the maximum value at the time of sorption equal to 60 min.     

Applicability of Kinetic Models for In Situ Combustion Processes with Different Oil Types

The in situ combustion (ISC) process is of interest as an enhanced oil recovery method because it is an alternative to traditional steam-based processes for heavy oil and bitumen recovery. ISC is a technique applicable outside the window of reservoir conditions deemed appropriate for steam injection (such as deeper and thinner reservoirs). The process involves complex chemical reactions and physical recovery mechanisms, and predicting the likelihood of successful ISC in field applications remains challenging. This paper describes a numerical investigation of the capability of different ISC kinetic models to predict the combustion behaviors of different types of oils (light oil, heavy oil, and bitumen). Three kinetic models (of Coats, Crookston, and Belgrave) were selected from literature and compared using data from four published combustion-tube experiments. The comparison procedure is as follows: (1) validate the numerical modeling of each kinetic model by matching the selected experimental results or duplicating the numerical results found in published literature; (2) adjust fluid viscosities and densities to match the fluid properties of each experiment;and (3) use each validated kinetic model to predict the performance of the other experiments without further tuning the kinetic parameters. The knowledge derived from the experiments provides guidance for choosing the appropriate kinetic model when no other data are available and for the preliminary design and screening study of a potential ISC project.